Emtek 4444 STRETTO Narrow Trim Lockset, 1-1/2" x 11" Arched Keyed, Brass Tubular, Single Cylinder
- Can be ordered with any Brass Knob or Lever
- Sold as complete set. Includes Latch and Strike Plate
- Narrow 1-1/4" Door Preps, 3-3/8" C-to-C Hole Spacing
- Supplied with 28 Degree Latch
- Standard backset is 2-3/8" backset. Specify 2-3/4" backset if required.
- Handing required for Leversets
Specifications:
- Backset: Adjustable 2-3/8" or 2-3/4"
- Height: 10"
- Width: 2"
- Door Thickness: 1-1/4" to 3"
- Bore Hole: 1-1/4"
- Plate Thickness: 3/4"
Manufacturer Resources
Product Specs
- Subcategory:
- Single Point Locksets
- Product Type:
- Narrow Trim Locksets
- Product Group:
- Mechanical Locks
- Product Subgroup:
- Bored Locksets
- Commercial/Residential:
- Residential
- Lock Type:
- Tubular
- Keyed:
- Yes
- Keyed Function:
- Single Cylinder
- Collection:
- Brass
- Series:
- STRETTO Arched
- Theme:
- American Classic
- Electronic:
- No
- Lock Function:
- Entry
- Handle Type:
- Knob or Lever
- MAP Policy:
- Yes
- Product Model:
- 4444
- Product Function:
- Entry
- Product Size:
- 1-1/2" x 11"
- Product Style:
- STRETTO
- Product Material:
- Brass
- Product Category:
- Mechanical Locks
- Product Substrate:
- Brass
- Department:
- Door Hardware
Emtek 4444-FB – Frequently Asked Questions
1) Will the Emtek 4444 STRETTO narrow trim lockset fit a narrow stile door with a 1-1/4 inch bore?
That's exactly what it's built for. The 4444 STRETTO uses a narrow 1-1/4 inch bore hole with 3-3/8 inch center-to-center hole spacing, so it goes on doors too narrow for a standard 2-1/8 inch cross bore. The trim plate itself is 1-1/2 x 11 inches. If your door already has a standard 2-1/8 inch bore, this will not cover or fit it without new door prep.
2) Do I have to specify handing on the Emtek 4444 STRETTO lockset?
Handing is required, right hand or left hand. It matters most on lever trim, since a lever has to point the correct direction, but the order asks for it either way. Stand outside the door: if the hinges are on your right, it's right hand.
3) What backset does the Emtek 4444 come with, and can I use it on a 2-3/4 inch backset door?
Both backsets are covered. Standard is 2-3/8 inch, and 2-3/4 inch is selectable at order time, so it drops onto either of the two common residential bore positions. The latch supplied is a 28 degree latch.
4) Is the Emtek 4444 a double cylinder lock, or does it have a thumbturn inside?
It's a single cylinder entry set: key on the outside, thumbturn or inside operation without a key. If your local code or insurance calls for keyed access from both sides on a glass-adjacent door, this is not the configuration to order.
5) Can I key several Emtek 4444 locksets to one key for a building or a house?
Yes. Keying is selectable as keyed different or keyed alike, and there's an optional key code field if you need the set cut to an existing code you already carry.
6) What knob and lever options can I pair with the Emtek 4444 arched narrow plate?
Any Emtek brass knob or lever works with it. The inside trim choices run ten levers (Aurora, Bryce, Cimarron, Cody, Durango, Lariat, Mariposa, Montrose, Teton, Yuma) and fifteen knobs including Butte, Egg, Round, Winchester, Bristol, Hampton, Lowell, Windsor, Astoria, Diamond, Georgetown, Modern Disc, Modern Square, Old Town and Providence. Pick a lever and handing becomes the deciding detail.
7) Is the Emtek 4444 lockset suitable for a commercial opening?
It's a residential-duty tubular entry lock. For an apartment unit door, a house, or a hospitality guest room it's in its element; for a high-traffic commercial opening that needs a graded cylindrical or mortise lock, specify a commercial lockset instead.
8) What finishes does the Emtek 4444 STRETTO arched lockset come in?
Three: Flat Black (FB), Medium Bronze (MB), and Tumbled White Bronze (TWB). The body is solid brass, so the finish sits on a brass substrate rather than plated zinc.
9) Is the Emtek 4444 an electronic or smart lock?
No, it's fully mechanical, key operated. There's no keypad, motor, or wiring to run, so no power prep in the door is needed.
How fast can I get the Emtek 4444-FB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 4444-FB come with a warranty?
Absolutely. The Emtek 4444-FB is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 4444-FB?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Emtek 4444-FB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.