Emtek 471112 Tuscany Monolithic Entrance Handleset - Lost Wax Cast Bronze Tubular - Single Cylinder
- Can be ordered with any Lost Wax Bronze Knob or Lever for the inside trim
- Sold as a complete set.
- Handing required if Lever used on inside
Specifications:
- Door Thickness: 1-3/8" to 1-3/4"
- Mount: Surface Mount (no door prep required)
- Material: Brass
Manufacturer Resources
Product Specs
- Subcategory:
- Handlesets
- Collection:
- Tuscany Bronze
- Product Type:
- Handlesets
- Product Group:
- Mechanical Locks
- Product Subgroup:
- Bored Locksets
- Commercial/Residential:
- Residential
- Keyed Function:
- Non-Keyed
- Lock Type:
- Tubular
- Keyed:
- No
- Lock Function:
- Dummy
- Series:
- Tuscany
- Theme:
- Tuscany
- Electronic:
- No
- Handle Type:
- Handleset
- MAP Policy:
- Yes
- Product Model:
- 470112
- (CTC) Center-to-Center:
- 5-1/2"
- Product Function:
- Dummy
- Product Style:
- Tuscany Bronze
- Product Material:
- Bronze
- Product Category:
- Mechanical Locks
- Product Substrate:
- Bronze
- Department:
- Door Hardware
Emtek 470112-FB – Frequently Asked Questions
1) Is the Emtek 470112 Tuscany handleset a working lock or just a dummy?
Dummy function only. The Tuscany 470112 handleset is non-keyed with no latch and no deadbolt, so it does not operate or secure anything. It is surface mounted trim for an inactive leaf of a double door, a fixed french door panel, or a pantry or closet door you want to look like the entry. If you need the door to latch or lock, order the keyed single cylinder version of the Tuscany handleset instead.
2) Will the Emtek Tuscany dummy handleset fit my door thickness, and do I need to bore the door?
It covers doors from 1-3/8 inch to 1-3/4 inch, which spans a standard interior door and a standard exterior door. Mounting is surface mount with no door prep required, so there is no cross bore or edge bore to drill. Mounting screw centers are 5-1/2 inches center to center, so plan for a stile wide enough to take that plate.
3) Do I have to specify handing on an Emtek 470112 dummy handleset?
Handing is a required selection, right hand or left hand. It matters if you pick a lever for the inside trim, since the lever has to point toward the strike side. With a knob inside, handing has no effect on how the part works, but the order still needs a hand chosen.
4) What inside knob or lever comes with the Emtek Tuscany 470112, or do I order that separately?
It ships as a complete set, but you pick the interior trim when you order. Choices are the Medici, Napoli, Octagon or Padua levers, or the Octagon, Parma, Petal, Diamond, Georgetown, Old Town, Bristol, Hampton, Lowell or Windsor knobs, plus Ebony and Ice White porcelain knobs. Any Lost Wax Bronze knob or lever in the line can be paired with it.
5) Will the Emtek 470112 Tuscany handleset fit a 2 inch thick door?
The Emtek 470112 Tuscany covers 1-3/8 inch to 1-3/4 inch doors. For a thicker slab, the Weslock 6695 Belmont Dummy Handleset and the Weslock 2815 Hillcrest Dummy Handleset both list 1-3/8 inch to 2 inch, and the Deltana 810871 Montego Handleset also lists 1-3/8 inch to 2 inch. If the door runs thicker still, the Weslock 1411 Traditionale Colonial Handleset with Eleganti Knob lists 1-3/4 inch to 2-1/4 inch.
6) What other dummy handlesets work on an inactive door besides the Emtek 470112 Tuscany?
The Emtek 470112 Tuscany is a dummy-function handleset, so it is non-operating trim for an inactive or fixed leaf. Two other dummy handlesets serve the same role: the Weslock 6695 Belmont Dummy Handleset with Impresa Knob in the Elegance Series, rated for 1-3/8 inch to 2 inch doors, and the Weslock 2815 Hillcrest Dummy Handleset with New Heaven Lever in the Premiere Essentials Series, also 1-3/8 inch to 2 inch. The Emtek is cast bronze trim with a 5-1/2 inch center-to-center handle and surface mounts with no door prep, which is the practical difference on an existing slab.
7) I need a keyed entry handleset, not a dummy - what should I order instead of the Emtek 470112 Tuscany?
The Emtek 470112 Tuscany is non-keyed dummy trim and will not lock anything. For a locking exterior opening, keyed handlesets include the Schlage Residential F60 Addison Single Cylinder Keyed Entry Handleset with Accent Lever, a Grade 2 F Series set for 1-3/8 inch to 1-3/4 inch doors; the Pamex FS7P31 Lexington Single Cylinder Handleset in satin nickel, also 1-3/8 inch to 1-3/4 inch; and the Weslock 2810 Hillcrest Single Cylinder Handleset with Hudson Knob for 1-3/8 inch to 2 inch doors.
8) What finishes does the Emtek 470112 Tuscany bronze handleset come in?
Two: Flat Black Bronze (FB) and Medium Bronze (MB). Both are lost wax cast bronze from the Tuscany Bronze collection, so they are living finishes that will patina with handling and weather rather than stay uniform. There is also an optional split finish entry if you want the exterior and interior trim in different finishes.
9) Can I match a dummy handleset to the keyed entry handleset on my other doors?
That is exactly what the 470112 is for. Because it is the same Tuscany cast bronze plate in the same Flat Black Bronze or Medium Bronze finishes, and the interior trim comes from the same Lost Wax Bronze knob and lever family, an inactive leaf or a fixed french door panel reads identically to the working entry next to it. Keep the finish code and the knob or lever choice the same across the openings.
10) Is the Emtek Tuscany handleset rated for commercial use?
No. It is classified residential, with no ANSI/BHMA grade behind it, so it is not the part for a commercial opening or a code-rated door. For graded residential-duty handlesets, the Schlage Residential F60 Addison and the Master Lock HDLB Series are both listed as Grade 2, and Kwikset's 687 Amador and Belleview handlesets are Grade 3.
11) What other dummy handlesets could I use instead of the Emtek 470112?
Two in the same function: the Weslock 6695 Belmont dummy handleset with Impresa knob and the Weslock 2815 Hillcrest dummy handleset with New Heaven lever, both listed for 1-3/8 to 2 inch doors. Those give you a wider thickness range than the Emtek's 1-3/8 to 1-3/4 inch, but neither is cast bronze, so they will not match a Tuscany Bronze opening.
12) What is a graded handleset alternative to the Emtek 470112 Tuscany for a rental property?
The Emtek 470112 Tuscany is a residential cast bronze dummy handleset. Where a published ANSI grade matters for a rental turn, the Master Lock HDLB Series HDLBA0615/4D is a Grade 2 single cylinder deadbolt handleset, the Schlage Residential JE285 Barcelona with Seville lever is a Grade 2 non-keyed entry set for 1-3/8 inch to 1-3/4 inch doors, and the Kwikset 687BW Belleview single cylinder handleset is Grade 3 for 1-3/4 inch doors.
13) We want keyless electronic access instead of the Emtek 470112 Tuscany handleset - what handleset options do that?
The Emtek 470112 Tuscany is a non-electronic dummy handleset. For an electronic opening, the Kwikset 815SCEHFL-CP913CNT San Clemente Handleset pairs a Halifax lever with a contemporary SmartCode keypad deadbolt and SmartKey, for 1-3/4 inch doors. Yale Real Living offers the BYRD226NRRX Assure Lock standalone touchscreen deadbolt with Ridgefield handleset and the BYRD226CBARX Wi-Fi and Bluetooth version, both listed for 1-3/4 inch to 2-1/4 inch doors.
14) Which handlesets look like a substitute for the Emtek 470112 Tuscany but are actually exterior-only trim?
The Emtek 470112 Tuscany is sold as a complete set including the inside knob or lever you select. The Kwikset 687AMD Amador and 687BW Belleview single cylinder handlesets are catalogued as exterior only, so the interior trim has to be sourced separately. The Baldwin Estates 6542 Tremont entry mortise trim is likewise trim rather than a complete tubular set.
15) I do not know the backset on the door - is there a handleset more forgiving than the Emtek 470112 Tuscany?
The Emtek 470112 Tuscany surface mounts with no door prep required, which sidesteps backset entirely for a dummy application. If you need a functioning handleset and the existing bore backset is uncertain, Sure-Loc builds adjustable-backset handlesets across the Aspen AN507 keyed entry, Alta AT507 tubular, Coral CR507, and Madison MA507 keyed entry sets.
16) Is the Emtek 470112 solid bronze or plated?
Lost wax cast bronze, with bronze given as both the material and the substrate, so the color runs through the metal rather than sitting on top as a plating. That is why the Flat Black Bronze and Medium Bronze finishes age instead of chipping, and why it holds up on an exposed exterior face.
17) What solid brass handlesets compare to the Emtek 470112 Tuscany cast bronze?
The Emtek 470112 Tuscany is a lost wax cast bronze handleset with a bronze substrate, offered in Flat Black Bronze and Medium Bronze. On the solid brass side, Deltana lists the 803871B Hanover, 815871 St. Ann, and 825871 Kingston handlesets as solid brass entry function. The Deltana sets are entry function rather than dummy, so they operate a latch where the Emtek does not.
18) Instead of the Emtek 470112 Tuscany dummy set, what handles a passage opening with a separate deadbolt?
The Emtek 470112 Tuscany is a dummy set with no latching function. For a passage latch tied to a keyed deadbolt on one trim, the Schlage Residential JI18/19 interconnected passage lock with keyed deadbolt and Torino lever in satin stainless is a Grade 2 JI Series unit for 1-3/8 inch to 1-3/4 inch doors. For a keyless passage handleset with an electronic deadbolt, the Yale BYRD256 CBARX pairs an Assure key free touchscreen deadbolt with a Ridgefield passage handleset for 1-3/4 inch to 2-1/4 inch doors.
How fast can I get the Emtek 470112-FB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 470112-FB come with a warranty?
Absolutely. The Emtek 470112-FB is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 470112-FB?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Emtek 470112-FB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.