Emtek 470224 Tuscany Sectional Entrance Handleset - Lost Wax Cast Bronze Tubular - Dummy

It's a dummy set, non-keyed and with no working latch. The Tuscany 470224 mounts on the surface of the door and gives you the look of an entrance handleset for a fixed or inactive leaf, a French door slab, or the non-operating half of a pair. If you need a working exterior lock, you want a keyed entrance handleset instead.

No door prep is needed. The 470224 is surface mounted, so it screws to the face of the door with no cross bore or latch mortise. That makes it workable on a slab you don't want to drill through, such as a glass-panel French door stile or a decorative inactive leaf.

1-3/8 inch to 1-3/4 inch doors, which covers standard interior slabs and standard 1-3/4 inch exterior doors. There is a door thickness field on the order so you can state the actual slab you're mounting to.

Handing is required on the order, right hand or left hand, and it matters specifically when a lever is chosen for the inside trim since a lever has to point away from the hinges. Both RH and LH are offered.

You pick it. The set ships complete with an inside trim of your choice from the Lost Wax Bronze range: Medici, Napoli, Octagon or Padua levers, or Octagon, Parma, Petal, Diamond, Georgetown, Old Town, Bristol, Hampton, Lowell or Windsor knobs, plus Ebony and Ice White porcelain knobs. The inside trim is a required selection, not an add-on purchase.

The active leaf needs a keyed or latching Tuscany handleset; the 470224 dummy goes on the inactive leaf so the two sides look identical without a second lock. Order both in the same finish, Flat Black Bronze or Medium Bronze, with the same inside trim, and give handing for each leaf if you're using levers.

The Emtek 470224 Tuscany sectional handleset is a dummy function, non-keyed unit, so it operates nothing and is used on fixed or inactive leaves. If you want another dummy handleset, the Weslock 2815 Hillcrest is a dummy handleset paired with a New Heaven lever in the Premiere Essentials series, and the Weslock 6695 Belmont is a dummy handleset with an Impresa knob in the Elegance series. Both Weslock units list a 1-3/8 inch to 2 inch door thickness range; the Emtek 470224 covers 1-3/8 inch to 1-3/4 inch.

The Emtek 470224 Tuscany handleset is dummy function and non-keyed, so it will not latch or lock anything. For a keyed entry handleset instead, the Schlage F60 Addison with Accent lever is a Grade 2 single cylinder keyed entry handleset covering 1-3/8 inch to 1-3/4 inch doors, the same thickness range the Emtek 470224 lists. Other keyed options include the Weslock 2810 Hillcrest single cylinder handleset with Hudson knob for 1-3/8 inch to 2 inch doors, and the Pamex FS7P31 Lexington single cylinder handleset in satin nickel, also 1-3/8 inch to 1-3/4 inch.

The Emtek 470224 Tuscany sectional handleset lists a door thickness range of 1-3/8 inch to 1-3/4 inch. For a thicker door, the Deltana 810871 Montego handleset lists 1-3/8 inch to 2 inch, and the Weslock 6695 Belmont dummy handleset lists 1-3/8 inch to 2 inch. Beyond that, the Weslock 1411 Traditionale Colonial single cylinder handleset lists 1-3/4 inch to 2-1/4 inch.

No. The Emtek 470224 Tuscany handleset is dummy function - it is surface mounted with no door prep required and has no latch or bolt. A non-keyed entry handleset such as the Schlage JE285 Barcelona with Seville lever still operates a latch; it is a Grade 2 unit for 1-3/8 inch to 1-3/4 inch doors. The Schlage JI18/19 is listed as passage function with a keyed deadbolt, also 1-3/8 inch to 1-3/4 inch. If the leaf needs to open and close, choose one of those rather than the dummy.

5-1/2 inches center to center between the upper and lower sections. Because it's a sectional set, that spacing tells you where the two mounting points land, which matters if you're trying to line it up with an existing handleset footprint or with the other doors on the elevation.

It's classed residential, and it's a dummy with no latch or cylinder, so it isn't an entrance solution for a commercial opening. For keyed residential-grade entry sets ZenSupply carries Grade 2 options such as the Schlage Residential F60 Addison with Accent lever, which fits 1-3/8 to 1-3/4 inch doors.

The Emtek 470224 Tuscany handleset is a non-electronic dummy set. For a keypad or smart option, the Kwikset 815SCEHFL-CP913CNT San Clemente pairs a handleset with a Halifax lever and a Contemporary SmartCode electronic deadbolt for 1-3/4 inch doors. Yale Real Living offers the BYRD226NRRX Assure standalone touchscreen deadbolt with Ridgefield handleset and the BYRD226CBARX Wi-Fi and Bluetooth touchscreen version, both listed for 1-3/4 inch to 2-1/4 inch doors.

The Emtek 470224 Tuscany handleset is a residential dummy set in bronze. If you want a graded unit, the Schlage F60 Addison with Accent lever and the Schlage JE285 Barcelona with Seville lever are both Grade 2, and the Master Lock HDLBA0615/4D single cylinder deadbolt handleset in the HDLB series is Grade 2 as well. The Kwikset 687AMD Amador and 687BW Belleview single cylinder handlesets are Grade 3 and list 1-3/4 inch doors.

The Emtek 470224 Tuscany is a lost wax cast bronze tubular handleset with a 5-1/2 inch center-to-center. Deltana offers several solid brass entry handlesets: the 803871B Hanover, the 815871 St. Ann, and the 825871 Kingston, all listed as entry function in solid brass. The Deltana 810871 Montego is another handleset in the same family, listed for 1-3/8 inch to 2 inch doors. The difference in function matters - the Deltana sets are entry, while the Emtek 470224 is dummy.

The Emtek 470224 Tuscany is a dummy handleset that surface mounts with no door prep, so backset is not a factor for it, but it also will not latch. If you need a working handleset and the bore is already cut, Sure-Loc offers handlesets with adjustable backset: the AN507 Aspen single cylinder keyed entry, the AT507 Alta tubular, the CR507 Coral, and the MA507 Madison keyed entry.

The Emtek 470224 Tuscany is a tubular handleset, sold as a complete set, in dummy function with no keying. The Baldwin Estates 6542 Tremont is mortise entry trim, offered as the 6542ENTR single cylinder and the 6542DBLC double cylinder, both listed for 1-3/4 inch doors. Mortise trim goes on a mortise lock body and a pocket prep in the door edge; the Emtek 470224 surface mounts with no door prep, so the two are not interchangeable in the same opening.

No. The Emtek 470224 Tuscany is sold as a complete set and requires you to select an inside knob or lever, so interior trim always comes with it. If you want exterior trim only, the Kwikset 687AMD Amador single cylinder keyed handleset and the 687BW Belleview are both listed as exterior only, Grade 3, for 1-3/4 inch doors; the 687AMD is offered as a SmartKey version and as the SMC version with an SC1 keyway.

Lost wax cast bronze, listed as a brass-family alloy substrate. Cast bronze parts carry the surface texture of the mold and the finish is integral to the metal rather than a plated skin, so wear shows as patina instead of a plating break. It's non-electronic, purely mechanical trim.

Handing is required on the Emtek 470224 Tuscany when a lever is used on the inside, and it is ordered as right hand or left hand. The Weslock 6695 Belmont dummy handleset pairs with an Impresa knob and the Weslock 2815 Hillcrest dummy handleset pairs with a New Heaven lever, so a lever-trimmed dummy is the case where handing needs confirming. On the Emtek 470224 the inside trim is chosen from knobs such as the Parma, Windsor, and Ebony Porcelain, or levers such as the Medici and Napoli.