Emtek 472224 Tuscany Sectional...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$704.00
$563.20
Emtek Emtek 472224 Tuscany Sectional Entrance Handleset - Lost Wax Cast Bronze Tubular - Double Cylinder EMTEK-472224

Emtek 472224 Tuscany Sectional Entrance Handleset - Lost Wax Cast Bronze Tubular - Double Cylinder

(No reviews yet) Write a Review

Model: 472224-FB
From the Tuscany Bronze Collection
$704.00
$563.20
Selected Finish is
Selected Knob or Lever for the inside trim is
Selected Handing is
Selected Backset is
Selected FREE KEYING Options is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$704.00
$563.20
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Emtek 472224 Tuscany Sectional Entrance Handleset - Sandcast Bronze Tubular - Double Cylinder

  • Can be ordered with any Lost Wax Bronze Knob or Lever for the inside trim
  • Sold as a complete set. Includes Latch and Strike Plate
  • Standard 2-1/8" Door Prep. Door Prep 5-1/2" Center-to-Center
  • Schlage C Keyway
  • Standard latch is for 2-3/8" backset. Specify 2-3/4" backset if required
  • Handing required if Lever used on inside

Weiser® (WR5) Keyway

Specify by adding "W" to the beginning of Product Code for Weiser (WR5) Keyway.
No upcharge for cylinder substitution. Can be keyed into existing Weiser system.

 

 

Specifications:

  • Backset: 2-3/8" or 2-3/4"
  • Cross Bore: 2-1/8"
  • Door Thickness: 1-3/8" to 2"
  • Keyway: Schlage C
  • Handing: Required – specify left or right

Product Specs

Subcategory:
Handlesets
Collection:
Tuscany Bronze
Product Type:
Handlesets
Product Group:
Mechanical Locks
Product Subgroup:
Bored Locksets
Keyed Function:
Double Cylinder
Commercial/Residential:
Residential
Lock Type:
Tubular
Keyed:
Yes
Lock Function:
Entry
Series:
Tuscany
Theme:
Tuscany
Electronic:
No
Handle Type:
Handleset
MAP Policy:
Yes
Product Model:
472224
(CTC) Center-to-Center:
5-1/2"
Product Function:
Double Cylinder
Product Style:
Tuscany Bronze
Product Material:
Bronze
Product Category:
Mechanical Locks
Product Substrate:
Bronze
Department:
Door Hardware

Emtek 472224-FB – Frequently Asked Questions

1) Will the Emtek 472224 Tuscany handleset fit my existing door prep?
It uses a standard 2-1/8 inch cross bore with 5-1/2 inch center-to-center spacing between the handle bore and the deadbolt bore, and fits doors 1-3/8 to 2 inches thick. If your current handleset used that same 5-1/2 inch CTC layout and standard 2-1/8 bores, it drops into the existing prep. Backset is your choice of 2-3/8 or 2-3/4 inches, so match whatever the door was bored for.
2) What does double cylinder mean on this Emtek Tuscany handleset, and is it right for a glass-panel front door?
Double cylinder means the deadbolt is keyed on both the outside and the inside, so there is no thumbturn to reach through broken glass or a sidelite and flip. That is why it gets specified on doors with glass. The trade-off is the inside needs a key to exit, which some local codes restrict on a primary egress door, so confirm your jurisdiction allows it.
3) Do I have to specify handing when I order the Emtek 472224?
Handing is required, left or right. It matters because the interior trim option can be a lever, and a lever has to point the correct way. Even when you pick a knob for the inside, the order asks for LH or RH so the set ships correct to your opening.
4) Can I key this Emtek Tuscany handleset into my existing Weiser or Schlage keys?
Both are covered. Schlage C is the standard keyway, and a Weiser WR5 cylinder is available as a no-upcharge substitution that can be keyed into an existing Weiser system. Keying comes as keyed different or keyed alike, and you can supply a key code if you need it cut to an existing system.
5) I have a 2-inch thick entry door. Which handlesets will actually fit?
The Emtek 472224 covers 1-3/8 to 2 inches, so a 2 inch door is within range. If you need to go thicker than 2 inches, the Weslock 1411 Traditionale colonial handleset covers 1-3/4 to 2-1/4 inches. Watch out for the Kwikset Amador and Belleview handlesets and the Schlage F60, which are listed at 1-3/4 inch and 1-3/8 to 1-3/4 inch respectively.
6) What is the closest double cylinder handleset alternative to the Emtek 472224 Tuscany?
The Emtek 472224 Tuscany is a double cylinder entrance handleset, meaning it is keyed on both the outside and the inside. The nearest double cylinder alternative is the Baldwin Estates 6542 Tremont Double Cylinder Entry Mortise Trim. The difference is the lock body behind the trim: the Emtek 472224 is a tubular lock with a 2-1/8 inch cross bore and a 5-1/2 inch center-to-center door prep, while the Baldwin 6542 is mortise trim and calls for a 1-3/4 inch door. If the door is already bored for a tubular handleset, the Emtek matches that prep; if the door is mortised, the Baldwin trim is the one that fits.
7) I want the same handleset but keyed only on the outside - what should I order instead?
The Emtek 472224 Tuscany is the double cylinder version, keyed from both sides. If you want a thumbturn or unkeyed inside instead, single cylinder handlesets in the comparable range include the Baldwin Estates 6542 Tremont Single Cylinder Entry Mortise Trim, the Weslock 2810 Hillcrest Single Cylinder Handleset with Hudson Knob, and the Schlage Residential F60 Addison Single Cylinder Keyed Entry Handleset with Accent Lever. Note the Weslock 2810 covers 1-3/8 to 2 inch doors and the Schlage F60 covers 1-3/8 to 1-3/4 inch, while the Baldwin 6542 is for a 1-3/4 inch door.
8) My door is 2-1/4 inches thick - the Emtek 472224 will not cover it, so what will?
The Emtek 472224 Tuscany covers 1-3/8 inch to 2 inch doors. For a thicker door, the Weslock 1411 Traditionale Colonial Handleset with Eleganti Knob is a single cylinder unit rated for 1-3/4 inch to 2-1/4 inch doors. Among electronic options, the Yale Real Living BYRD226NRRX Assure Lock standalone touchscreen deadbolt with Ridgefield handleset also covers 1-3/4 inch to 2-1/4 inch. The Weslock keeps you on a keyed mechanical cylinder like the Emtek; the Yale replaces the key with a touchscreen deadbolt.
9) Can I key the Emtek 472224 into my existing Kwikset SmartKey system, or do I need a different handleset?
The Emtek 472224 Tuscany ships with a Schlage C keyway as standard and can be ordered with a Weiser WR5 keyway instead, which keys into an existing Weiser system with no upcharge for the cylinder substitution. It is not a SmartKey product. If your building is standardized on Kwikset SmartKey, the Kwikset 687AMD SMT Amador single cylinder handleset uses SmartKey, and the Kwikset 687AMD SMC version pairs SmartKey with an SC1 keyway; both are exterior trim only for a 1-3/4 inch door.
10) What interior knob or lever comes with the Emtek 472224 handleset?
The inside trim is a choice you make, not a fixed part. Any Lost Wax Bronze knob or lever pairs with it: Medici, Napoli, Octagon and Padua levers, or Octagon, Parma, Petal, Diamond, Georgetown, Old Town, Bristol, Hampton, Lowell and Windsor knobs, plus Ebony and Ice White porcelain knobs. Pick one when ordering, and remember a lever makes handing critical.
11) Is anything else needed to install the Emtek 472224, or is it a complete set?
It ships complete with the latch and strike plate included. The standard latch is set up for a 2-3/8 inch backset, so if your door is bored at 2-3/4 inches you have to call that out on the order. Beyond the interior trim selection, no separate cylinder or deadbolt purchase is involved.
12) Is the Emtek 472224 a mortise handleset or a tubular one?
Tubular, bored into a standard 2-1/8 inch cross bore rather than a routed mortise pocket. That makes it far simpler to install in an existing bored door. If your door already carries a mortise box and you want to keep it, a mortise trim set like the Baldwin Estates 6542 Tremont double cylinder entry trim is the type to look at instead.
13) Does anything comparable to the Emtek 472224 carry an ANSI grade rating?
The Emtek 472224 Tuscany is a residential handleset. If your specification calls out a graded product, the Master Lock HDLB Series HDLBA0615/4D single cylinder deadbolt handleset is Grade 2, as is the Schlage Residential F60 Addison with Accent Lever, which covers 1-3/8 to 1-3/4 inch doors. The Kwikset 687BW Belleview is Grade 3 and is exterior trim only for a 1-3/4 inch door. All three are single cylinder, so they differ in function from the double cylinder Emtek.
14) We want keypad entry on the front door instead of the Emtek 472224 - what handleset options do that?
The Emtek 472224 Tuscany is a mechanical, non-electronic double cylinder handleset. For keypad operation on a similar handleset-plus-deadbolt arrangement, the Kwikset 815SCEHFL-CP913CNT San Clemente handleset with Halifax lever pairs with a Contemporary SmartCode electronic deadbolt with SmartKey and ships with an RCAL latch and RCS strike for a 1-3/4 inch door. The Yale Real Living BYRD226CBARX Assure Lock adds Wi-Fi and Bluetooth with a Ridgefield handleset for 1-3/4 to 2-1/4 inch doors, and the BYRD226NRRX is the standalone touchscreen version of the same set.
15) Is there a simpler handleset than the Emtek 472224 for a rental unit where I do not need cast bronze?
Yes. The Emtek 472224 Tuscany is a lost wax cast bronze handleset with a required handing selection and a required inside knob or lever choice from the Tuscany bronze trim range. For a straightforward keyed entry opening, the Schlage Residential F60 Addison with Accent Lever is a Grade 2 single cylinder handleset for 1-3/8 to 1-3/4 inch doors, and the Kwikset 687AMD Amador is a Grade 3 single cylinder handleset for a 1-3/4 inch door, sold as exterior trim only. The Emtek gives you bronze material and split-finish and keying-to-code options; the Schlage and Kwikset are configured with fewer choices.
16) Which handlesets look like the Emtek 472224 but will not lock the door?
Be careful with dummy and non-keyed trim if you are shopping visually. The Emtek 472224 Tuscany is a keyed entry handleset with a double cylinder function. The Weslock 6695 Belmont with Impresa Knob and the Weslock 2815 Hillcrest with New Heaven Lever are both dummy function handlesets with no latch operation, and the Schlage Residential JE285 Barcelona with Seville Lever is a non-keyed entry handleset. Those suit an inactive leaf of a pair of doors, not a locking exterior opening.
17) Is there a handleset that handles both backsets without me specifying, unlike the Emtek 472224?
The Emtek 472224 Tuscany requires you to specify the backset at order: the standard latch is 2-3/8 inch and 2-3/4 inch is called out if required. Sure-Loc handlesets are built with an adjustable backset instead, including the Aspen AN507 single cylinder keyed entry, the Alta AT507 tubular handleset, the Coral CR507, and the Madison MA507 keyed entry. Those are the ones to look at if you are buying for openings whose bore centers you have not measured yet.
18) What solid brass handlesets compare with the Emtek 472224 Tuscany bronze?
The Emtek 472224 Tuscany is lost wax cast bronze, offered in Flat Black Bronze and Medium Bronze. If you want a solid brass body instead, Deltana offers several entry handlesets in solid brass: the 803871B Hanover, the 815871 St. Ann, and the 825871 Kingston. The Deltana 810871 Montego covers the same 1-3/8 inch to 2 inch door thickness range as the Emtek 472224, so it drops into the same door stock.
19) What finishes does the Emtek Tuscany 472224 come in?
Two lost wax cast bronze finishes: Flat Black Bronze (FB) and Medium Bronze (MB). Both are offered with either the Schlage or the Weiser cylinder. A split finish is available as a text option if you want the exterior and interior different.
20) I need a lever on the inside rather than a knob - does the Emtek 472224 do that or should I look elsewhere?
The Emtek 472224 Tuscany takes a lever on the inside, with Medici, Napoli, Octagon and Padua levers among the selections, and handing must be specified when a lever is used. Comparable handlesets that come with a lever interior already paired include the Schlage Residential F60 Addison with Accent Lever and the Weslock 2815 Hillcrest with New Heaven Lever, though the Weslock 2815 is a dummy function and does not latch. The Baldwin Wesley handlesets pair with knobs, the 180WYHXATK with the Alcott knob and the 180WYHXCYK with the Carnaby knob.
How fast can I get the Emtek 472224-FB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 472224-FB come with a warranty?
Absolutely. The Emtek 472224-FB is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 472224-FB?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Emtek 472224-FB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!