Emtek 472112 Tuscany Monolithic Entrance Handleset - Lost Wax Cast Bronze Tubular - Double Cylinder

Both are offered. The standard latch ships for a 2-3/8 inch backset, and you have to call out 2-3/4 inch on the order if that is what your door is bored for. Measure from the edge of the door to the center of the bore before you decide; a 2-3/4 inch door with a 2-3/8 inch latch will not reach the strike.

Handing is required on this one, right or left. It matters because of the inside trim: if you pair the exterior handle with a lever on the interior, the lever has to swing the correct way, and Emtek asks for handing to be specified when a lever is used inside. Stand outside the door facing it; if the hinges are on your right it is a right hand door.

Double cylinder means it takes a key on both sides, inside and out. There is no thumbturn on the interior. That is what people choose when the door has glass in it or a sidelite within arm's reach of the lock, so a broken pane does not let someone turn the lock open from the outside. The trade-off is egress: you need the key in hand to get out. If you would rather have a thumbturn inside, the single cylinder version of the same Tuscany handleset is the one to order.

Both keyways are available. Standard build is Schlage C, which is the common residential Schlage keyway, so a locksmith can cut it to an existing Schlage C system. Emtek also builds it in the Weiser WR5 keyway with no upcharge for the cylinder substitution, and that version can be keyed into an existing Weiser system. Pick the keyway on the order; you also choose keyed alike or keyed different, and you can supply a key code if you are matching an existing system.

It ships as a complete set with the latch and the strike plate included, so you are not sourcing those separately. What you do have to decide at order time is the interior trim: this handleset is ordered with a Lost Wax Bronze knob or lever for the inside, and that choice is required, not optional. Sixteen options run from levers like Medici, Napoli, Octagon and Padua to knobs including Georgetown, Old Town, Windsor, Bristol, Hampton, Lowell, Parma, Petal, Diamond, Octagon, and Ebony or Ice White porcelain.

Tubular. The 472112 is a bored tubular handleset, so it goes into a standard 2-1/8 inch cross bore rather than a routed mortise pocket. That is a meaningful difference on retrofit work: a door currently carrying a mortise lock has a deep rectangular pocket in the edge that a tubular set will not fill. If you are replacing mortise trim, the Baldwin Estates 6542 Tremont double cylinder entry mortise trim is a mortise-body product for 1-3/4 inch doors and is the shape that drops into that prep.

The Emtek Tuscany 472112 does, since it is rated 1-3/8 inch to 2 inch, which is a wider band than most residential handlesets carry. If you want other options at that thickness, the Deltana 810871 Montego and the Weslock 2810 Hillcrest both list 1-3/8 inch to 2 inch as well, and the Weslock 1411 Traditionale Colonial goes 1-3/4 inch to 2-1/4 inch. What will not work is a set limited to 1-3/4 inch, such as the Kwikset 687 Amador or Belleview.

No. The Emtek 472112 Tuscany handleset covers a door thickness range of 1-3/8 inch to 2 inch, so a 2-1/4 inch door is outside it. For a door that thick, the Weslock 1411 Traditionale Colonial handleset with Eleganti Knob covers 1-3/4 inch to 2-1/4 inch in a single cylinder function. The Yale Real Living Ridgefield handlesets also reach 2-1/4 inch - the BYRD226NRRX standalone touchscreen deadbolt version and the BYRD226CBARX Wi-Fi and Bluetooth version both cover 1-3/4 inch to 2-1/4 inch, though those pair the handleset with an electronic touchscreen deadbolt rather than a keyed cylinder.

The Emtek 472112 Tuscany is a residential handleset. If your specification calls for a graded lock, the Schlage Residential F60 Addison single cylinder keyed entry handleset with Accent lever is Grade 2 and covers 1-3/8 inch to 1-3/4 inch doors, and the Master Lock HDLBA0615/4D single cylinder deadbolt handleset is also Grade 2. The Kwikset 687AMD Amador and 687BW Belleview single cylinder handlesets are Grade 3 and fit 1-3/4 inch doors. Note the keyed function differs: the Emtek 472112 is double cylinder, keyed on both sides, while those graded handlesets are single cylinder with a thumbturn inside.

Both are double cylinder entrance products, but they are not the same kind of hardware. The Emtek 472112 Tuscany is a tubular lockset sold as a complete set with the latch and strike plate included, prepped for a standard 2-1/8 inch cross bore with 5-1/2 inch center-to-center spacing and a 2-3/8 inch or 2-3/4 inch backset. The Baldwin Estates 6542 Tremont double cylinder entry mortise trim is trim for a mortise lock body and lists a 1-3/4 inch door thickness. If the door is bored rather than mortised, the Emtek 472112 is the one that matches the prep; if you already have a mortise pocket in the door, the 6542 is the family to look at.

The Emtek 472112 Tuscany is double cylinder, which means a key operates it from the inside as well as the outside. If your code official or your tenant needs a thumbturn on the interior instead, single cylinder handlesets include the Baldwin Estates 6542 Tremont single cylinder entry mortise trim for 1-3/4 inch doors, the Weslock 2810 Hillcrest single cylinder handleset with Hudson Knob for 1-3/8 inch to 2 inch doors, and the Schlage Residential F60 Addison single cylinder keyed entry handleset with Accent lever for 1-3/8 inch to 1-3/4 inch doors. The Weslock 2810 matches the Emtek 472112 door thickness range of 1-3/8 inch to 2 inch most closely.

Two: Flat Black Bronze (FB) and Medium Bronze (MB). Both are on solid lost wax cast bronze, which is a living finish, so it will darken and wear at the touch points over time rather than staying uniform the way a plated finish does. If the interior side of the door needs to match a different finish than the exterior, a split finish can be called out on the order.

It is built and catalogued as a residential lock. For a multi-family unit door, a house, or a private office suite it is the right class of product. For a high-traffic commercial opening or anywhere a graded lock is being specified, look at handlesets with a stated grade instead: the Schlage Residential F60 Addison and the Master Lock HDLB Series single cylinder deadbolt handleset are both Grade 2, and the Kwikset 687 Amador is Grade 3.

Yes. Keyed alike is a free keying option on the order, so a set of Tuscany handlesets can be built to a single key rather than arriving on separate keys. If you are adding to an existing system rather than starting fresh, there is a field to enter the key code so the cylinders are cut to match what you already carry. Keyed different is the other choice if each door should be independent.

The Emtek 472112 Tuscany is a keyed entrance handleset with a double cylinder function, so it is built for a locking exterior door. For an inactive or interior door where you only want the appearance and the pull, a dummy handleset is the right part: the Weslock 6695 Belmont dummy handleset with Impresa Knob and the Weslock 2815 Hillcrest dummy handleset with New Heaven Lever are both dummy function and cover 1-3/8 inch to 2 inch doors, the same thickness range the Emtek 472112 covers. For a non-keyed but latching door, the Schlage Residential JE285 Barcelona style handleset with Seville lever is a non-keyed entry function handleset for 1-3/8 inch to 1-3/4 inch doors.

The Emtek 472112 Tuscany is a mechanical handleset - it is not electronic, and it is keyed on both the outside and the inside. If you want code or app entry on the same opening, the Kwikset 815SCEHFL-CP913CNT San Clemente handleset with Halifax lever interior trim pairs the handleset with a contemporary SmartCode keypad electronic deadbolt and fits a 1-3/4 inch door. The Yale Real Living BYRD256 CBARX Assure key free touchscreen deadbolt with Ridgefield passage handleset is Wi-Fi and covers 1-3/4 inch to 2-1/4 inch, and the BYRD226NRRX is a standalone touchscreen version with no network at the same thickness range. Be aware that on the key free Yale sets the handleset is passage trim and the deadbolt carries the security, whereas the Emtek 472112 puts a Schlage C keyway cylinder in the handleset itself.

The Emtek 472112 Tuscany is a lost wax cast bronze entrance handleset with a double cylinder keyed function. If you want a comparable solid brass handleset in an entry function, Deltana offers several: the 803871B Hanover, the 815871 St. Ann, and the 825871 Kingston are all solid brass handlesets in entry function. The distinction is the material and the keyed function - the Emtek 472112 is bronze with a key cylinder on both the outside and the inside, while the Deltana entry handlesets are solid brass. If the inside trim matters to you, the Emtek 472112 takes any of the Tuscany bronze knobs or levers, including the Medici Lever, the Windsor Knob, and the Ebony Porcelain Knob.

They share the door thickness window - the Deltana 810871 Montego handleset covers 1-3/8 inch to 2 inch and the Emtek 472112 Tuscany covers the same 1-3/8 inch to 2 inch range - so either will sit on the same door. What differs is the keyed function and the cylinder. The Emtek 472112 is double cylinder with a Schlage C keyway as standard, or Weiser WR5 if you specify it, and it requires handing to be called out when a lever is used on the inside. Confirm the function you need before treating the Montego as a one-for-one swap, since a double cylinder puts a key on the inside of the door as well.

No. The Emtek 472112 Tuscany is sold as a complete set including the latch and the strike plate, and the inside trim is part of the order - you choose a Tuscany knob or lever such as the Napoli Lever, the Georgetown Knob, or the Ice White Porcelain Knob. The Kwikset 687AMD SMT Amador and 687BW SMT Belleview single cylinder handlesets are exterior only, meaning the interior trim is a separate purchase. The Kwikset 687AMD SMC version carries an SC1 keyway with SmartKey; the Emtek 472112 comes in Schlage C as standard or Weiser WR5 keyway when specified.

The Emtek 472112 Tuscany covers 1-3/8 inch to 2 inch doors and takes a bronze knob on the inside - the Parma, Petal, Diamond, Old Town, Bristol, Hampton, Lowell, Windsor, and Octagon knobs are all inside trim options, along with Ebony and Ice White porcelain. Handing only has to be specified when a lever goes on the inside. For other knob-trim handlesets in that thickness window, the Weslock 2810 Hillcrest single cylinder handleset with Hudson Knob covers 1-3/8 inch to 2 inch, and the Pamex FS7P31 Lexington single cylinder handleset in satin nickel covers 1-3/8 inch to 1-3/4 inch in entry function. Baldwin also pairs the Wesley handleset with knob trim in the 180WYHXATK Alcott knob and 180WYHXCYK Carnaby knob entrance sets.

Lost wax casting means each piece is cast from solid bronze in a one-time mold rather than stamped or cast in zinc and plated. The substrate is bronze all the way through, so the color is the metal, not a coating over a different base. Practically, that means edge wear and door-knocker traffic will not expose a dissimilar base metal underneath, and the surface patinas rather than chips. It also makes for a heavier set than a plated residential handleset.

The Emtek 472112 Tuscany is a single tubular unit - one double cylinder handleset, sold complete with latch and strike, with your choice of Tuscany knob or lever on the inside. If you want a separate latch and deadbolt operating as an interconnected pair, the Schlage Residential JI18/19 interconnected passage lock with keyed deadbolt and Torino lever in satin stainless steel is that arrangement, with a passage latch alongside a keyed deadbolt, for doors 1-3/8 inch to 1-3/4 inch and Grade 2. The Master Lock HDLBA0615/4D is a single cylinder deadbolt handleset at Grade 2 if you want the deadbolt in the handleset with a thumbturn inside rather than a second key.