Emtek 5362 Modern Rectangular Two-Point Lockset - Brass Tubular - Dummy, Pair

The 5362 Modern Rectangular is a dummy, non-keyed set. There is no latch and no cylinder, so nothing retracts and nothing locks. It is trim only: knob or lever on a rectangular sideplate with a matching dummy deadbolt above it, so a closet, pantry, or inactive door of a French pair reads the same as the working doors nearby. If the opening needs to latch or lock, a dummy is the wrong function.

No boring. The 5362 is surface mount and needs no door prep, which is what makes it the usual fix on a door that was never drilled or on a slab you do not want to cut. It fastens with 1 inch wood screws, with threaded tubes and machine screws included for the through-bolted trim.

Yes, but say so when you order. Emtek supplies the hollow-core mounting hardware on request rather than in the standard box, since the standard 1 inch wood screws and threaded tubes are sized for a solid slab. Property managers replacing trim on builder-grade hollow-core interior doors should flag it up front.

Emtek lists the 5362 as residential hardware, and it carries no ANSI/BHMA cycle grade or fire rating, so it does not belong on a rated corridor or stair door in a commercial building. Its place is interior residential and light multi-family work: closets, pantries, French door leaves, and unit interiors where the door does not latch.

Both are non-keyed dummy sets that mount a lever or knob on a plate with a second point above it and no working latch. The Emtek 5362 is a dummy pair in brass with a rectangular sideplate, and the handle at the top is chosen from ten Key In Knob/Lever styles including the Cortina Lever, Hanover Lever, Luzern Lever, Providence Knob and Round Knob. The Omnia D12036PD is a solid brass double dummy deadbolt lever set with plates on a 5-1/2 inch center-to-center spacing, so if a drawing calls out that fixed 5-1/2 inch spacing between the two points, the Omnia is the one that states it.

A dummy set will not do it - the Emtek 5362 is non-keyed and does not accept a cylinder. For a keyed opening in the same two-point sideplate arrangement, the Omnia D12036A is a single cylinder deadbolt lever lockset in solid brass, keyed outside with a thumbturn inside. If the door needs a key on both sides, such as a glass-adjacent entry where reaching through is a concern, the Omnia D12036AC is the double cylinder version of the same sideplate design.

No. They are different functions on the same visual theme. The Emtek 5362 is a dummy pair - trim only, surface mounted with no door prep, sold as a set for both faces of an inactive or French door leaf. The Omnia D12036A is a single cylinder deadbolt lever lockset, so it carries a working bolt and a cylinder and needs the bore and edge prep that goes with one. Swapping from the 5362 to the D12036A means machining the door; going the other direction leaves prepped holes behind the Emtek plates.

One 5362 order is a complete set covering both faces of a single door, sideplate and trim on each side. For a set of French doors where you want dummy trim on both leaves, that is two orders. Sold complete, so no separate trim or rose to add.

Ten, and they mix freely with the rectangular plate: Cortina, Hanover, Helios, Luzern and Rope levers, and Egg, Providence, Rope, Round and Waverly knobs. One restriction worth knowing before you spec a run of doors: the Rope Lever is not made in Satin Brass (US4), Polished Nickel (US14), or Flat Black (US19). Any of these knob or lever styles also works with Annapolis trim if you are matching an existing set.

Seven finishes: Flat Black (US19), Oil Rubbed Bronze (US10B), Polished Chrome (US26), Polished Nickel (US14), Satin Brass (US4), Satin Nickel (US15), and Unlacquered Brass (US3NL). Unlacquered brass is the one that will patina with handling rather than hold its factory look, so keep it off a fleet standard unless that is the effect you want. A split finish can also be specified if the two faces of the door need to differ.

Either will serve the fixed leaf, and the choice comes down to trim and spacing. The Emtek 5362 ships as a dummy pair so one order covers both faces of the leaf, mounts to the surface with no door prep, and suits doors 1-3/8 to 1-3/4 inch thick with knob or lever styles such as the Egg Knob, Rope Lever or Helios Lever in finishes from Flat Black to Unlacquered Brass. The Omnia D12036PD is a double dummy lever set with plates fixed at 5-1/2 inch center to center, which is the one to match if the active leaf already carries Omnia trim at that spacing.

On the doors that need no function at all, the Emtek 5362 Modern Rectangular two-point dummy pair gives the same stacked two-point sideplate profile in brass, non-keyed, with a rectangular plate and a contemporary handle chosen from ten knob and lever styles. If you would rather stay within the Omnia line, the D12036PD is the double dummy version of the same D12036 sideplate the D12036AC uses. The Emtek route lets you pick the finish across seven options including Polished Nickel, Satin Brass and Oil Rubbed Bronze to bring the interior doors close to the entries.

Brass, both as the material and the substrate, so the finish sits on brass rather than on a zinc casting. That matters most in Unlacquered Brass (US3NL), where the base metal is what ages into the patina.

Two points means two pieces of trim on the plate: the knob or lever, plus a deadbolt turn above it, both carried on one continuous rectangular sideplate rather than on separate roses. On the 5362 both points are dummy, so the look of a lever-and-deadbolt entry set is there with no working mechanism behind it, which is how it gets used on inactive French door leaves that sit against a fixed astragal.

For the Emtek 5362, handing is required for lever styles - a Cortina, Hanover, Helios, Luzern or Rope Lever has to be called out left or right, while knob styles such as the Egg, Providence, Rope, Round or Waverly knobs do not. The Omnia D12036PD is a lever dummy set as well, so the same lever handing question applies when you are choosing between them. If handing on the fixed leaf is uncertain, a knob style on the Emtek 5362 sidesteps the decision entirely.

The Emtek 5362 Modern Rectangular two-point lockset is a residential product - brass trim, dummy function, surface mounted with no door prep, in seven finishes and ten knob and lever styles. If the opening needs a working bolt rather than trim, the Omnia D12036A single cylinder and D12036AC double cylinder deadbolt lever locksets are the functional members of that same sideplate look. For a commercial corridor with a graded or fire-rated requirement, none of these is the part to specify; ask for a cylindrical or mortise lockset rated for the opening instead.