Emtek 7015 Wrought Steel #5 3-5/8" Keyed Sideplate Tubular Lockset, Dummy (Pair)

It's a dummy set, so there's no latch and no working mechanism. The Emtek 7015 Wrought Steel #5 is a non-keyed dummy function, sold as a pair, which means fixed trim on both faces of the door. Use it on closet doors, french door inactive leaves, or any door held shut by a ball catch or roller catch that you supply separately.

No boring needed. The 7015 is surface mount, so there's no cross bore or edge bore to drill, which makes it a clean option on slabs you don't want to cut into or on older doors with odd existing prep. It fits doors 1-3/8 inch to 1-3/4 inch thick.

Handing is required on the Emtek 7015 because the lever styles are handed, and you pick Right Hand (RH) or Left Hand (LH) when you order. If you choose one of the knob options instead, handing isn't a functional concern, but the order still asks for it. Handing is determined from the outside of the door, standing on the side the door swings away from.

The Omnia D12036PD is a solid brass dummy deadbolt lever lockset with plates, built as a double dummy function, so it also mounts as a non-operating pair of trim sets. The Emtek 7015 is a Wrought Steel #5 sideplate dummy set with a 3-5/8 inch sideplate and a steel substrate, and it lets you pick the inside knob or lever style from options such as the Lafayette Lever, Jamestown Knob or Savannah Knob. The Omnia is a brass construction set with plates on a 5-1/2 inch center to center layout, so the plate spacing and material differ from the Emtek.

The Emtek 7015 Wrought Steel #5 sideplate set is a dummy, non-keyed function, so it has no latch or cylinder and will not secure an opening. For a locking sideplate lever set, the Omnia D12036A is a single cylinder deadbolt lever lockset in solid brass, and the Omnia D12036AC is the double cylinder version with a sideplate design. Single cylinder takes a key outside and a thumbturn inside; double cylinder is keyed on both sides, which matters where the door has glazing nearby or where egress code limits double cylinder use.

Seven choices: Lafayette, Normandy, and San Carlos levers, or Jamestown, Savannah, Madison Black, and Madison Ivory knobs. The set ships complete with the knobs or levers you select, so you're not buying trim separately. That also means you can carry one sideplate look across a house and change the grip style room to room.

Two finishes: Flat Black Steel (FBS) and Satin Steel (SWS). Both are part of Emtek's Wrought Steel collection, so the dummy pair matches passage, privacy, and keyed sideplates from the same collection on the rest of the openings.

No. The Wrought Steel #5 7015 is a residential product, styled for a rustic look. For an apartment turnover or a house it's fine, but for a commercial opening under a hardware schedule you want a graded bored or mortise lock instead.

The sideplate measures 3-5/8 inches. That's the width of the plate that sits on the door face, so measure your existing marks or bore before assuming it hides them. Because the 7015 mounts to the surface rather than through a standard 2-1/8 inch cross bore, a previously bored door may still show around the edges of the plate.

No. The Omnia D12036A is a single cylinder deadbolt lever lockset, so it requires bore and edge prep for a working deadbolt and latch. The Emtek 7015 is surface mount with no door prep required and fits doors 1-3/8 inch to 1-3/4 inch thick. Swapping a 7015 dummy for the D12036A means machining the door, not just changing trim.

The Emtek 7015 is from the Wrought Steel collection with a steel substrate and a Rustic Living theme, offered in Flat Black Steel and Satin Steel finishes. The Omnia D12036PD dummy lever lockset is solid brass construction with plates. If the design intent is a forged steel appearance, the Wrought Steel 7015 carries it; if you are matching existing brass hardware, the Omnia body material is the closer match.

One order covers both faces. The 7015 is sold as a dummy pair, complete with the knobs or levers you select. For a set of french doors where you want dummy trim on both leaves, you'd order two.

Yes when you choose a lever. The Emtek 7015 requires handing, right hand or left hand, and handing is called out for leversets. The Omnia D12036PD is a double dummy lever lockset, and the keyed Omnia sideplate options are the D12036A single cylinder and D12036AC double cylinder. On any lever trim, confirm the swing before ordering so the lever returns toward the door.