Emtek 7095 Rope 3-5/8" C-to-C Keyed Sideplate Lockset, Dummy (Pair) - Brass Tubular

It is a dummy set, non-keyed, so there is no latch operation and no locking. The knob or lever is fixed for push or pull only. Use it on a door that is held shut by a ball catch, roller catch, or magnetic catch, or on the inactive leaf of a French pair. If you need the door to latch or lock, a dummy is the wrong function.

Doors from 1-3/8 inch up to 1-3/4 inch, which covers standard residential interior slabs and the heavier 1-3/4 inch doors. If your door falls outside that range, note the thickness on the order so it can be checked before the set ships.

3-5/8 inches center to center. That is the spacing between the knob or lever spindle and the upper cylinder position on the plate, and it is what you match if you want the rest of the doors in the house to line up with the same sideplate layout. An Omnia D12036PD dummy sideplate set, by comparison, is a 5-1/2 inch center to center plate, so the two will not read the same on adjacent doors.

Handing is required on the 7095 because the sideplate and the lever are oriented, so a right hand set will not read correctly on a left hand door. Both Right Hand and Left Hand are offered. Stand outside the door: if the hinges are on your right, it is right hand.

The Emtek 7095 Rope sideplate set is a dummy, non-keyed function, so it has no cylinder and does not secure anything. For a locking sideplate lever set in solid brass, the Omnia D12036A is a single cylinder deadbolt lever lockset and the Omnia D12036AC is a double cylinder version with a sideplate design - single cylinder takes a key outside with a thumbturn inside, double cylinder takes a key on both faces.

The Omnia D12036PD is a solid brass dummy deadbolt lever lockset with plates, built as a double dummy function, so it serves the same purpose as the Emtek 7095 Rope dummy pair: non-latching trim on both faces of a door that does not need to operate. The main dimensional difference is center-to-center spacing - the Emtek 7095 is a 3-5/8 inch center-to-center sideplate, while the Omnia D12036PD is 5-1/2 inch center to center, so pick based on the spacing your sideplate layout calls for.

Yes, and it is a required choice. The Rope sideplate pairs with any of Emtek's brass knob or lever designs, from traditional shapes like the Rope Knob, Providence, Victoria and Waverly knobs to levers such as Cortina, Milano, Turino and Wembley, plus crystal options like Windsor and Georgetown and the modern L-Square, T-Bar and R-Bar bar levers. Pick the trim style at the same time as the finish so the set arrives matched.

Five: Oil Rubbed Bronze (US10B), Satin Nickel (US15), Polished Brass Lifetime (US3), Unlacquered Brass (US3NL) and French Antique (US7). Unlacquered brass is the one that will patina over time rather than holding its original look, so choose it deliberately if you want that change, or Polished Brass Lifetime if you want the shine to stay put.

It is a residential product. The Rope 7095 is a brass tubular dummy trim for homes, high-end multi-family unit interiors and hospitality guest room decor. For a commercial corridor or an opening with code or traffic requirements, specify a commercial grade lockset instead.

It is sold as a pair, meaning trim for both faces of the door, so one order covers a single door finished on both sides. If you are doing a French pair where only the inactive leaf is dummied, one set of this covers that leaf.

Brass is both the material and the substrate on the 7095, so the plate is brass rather than a plated zinc or steel body. That matters if you are ordering the unlacquered brass finish, since the patina develops in the base metal itself.