Emtek 8095 Victoria 3-5/8" C-to-C Keyed Sideplate Lockset, Dummy (Pair) - Brass Tubular

It's a dummy pair, so there's no latch operation at all. Both knobs or levers are fixed and the set mounts to the door face only. Use it on a door that doesn't need to latch, like a closet, a false door, or the inactive leaf of a double door. If you need the door to latch or lock, you need a passage, privacy, or keyed version instead.

Handing is a required selection, right hand or left hand. Emtek calls for handing on leversets in particular, since a lever has to point the correct way on the sideplate. Pick the hand based on the side the door swings and where the hinges sit.

It covers 1-3/8 inch through 1-3/4 inch doors, which spans both the common older interior slab and standard modern doors. There's a door thickness field on the order, so state your actual slab thickness when you place it.

The Emtek 8095 Victoria is dummy function, so it does not latch or lock at all. For a locking sideplate set, the Omnia D12036A is a single cylinder deadbolt lever lockset in solid brass, and the Omnia D12036AC is the double cylinder version with a sideplate design. Choose single cylinder for a thumbturn on the interior and double cylinder when the opening requires a key on both sides, such as a door with adjacent glass.

3-5/8 inches is the spacing between the two centers on the sideplate, so it sets how the escutcheon lays out on the door. If you're matching existing Emtek sideplate hardware elsewhere in the house, confirm yours is the same 3-5/8 inch C-to-C and not a wider spacing, because the plates won't line up otherwise.

Yes, and it's a required choice. The 8095 sideplate takes any Emtek brass knob or lever style, and the selection list runs from traditional shapes like the Victoria, Providence, and Rope knobs to crystal options such as Georgetown and Windsor, and levers like Milano, Cortina, Athena, and the L-Bar and T-Bar families. Both halves of the dummy pair get trim.

Five: Oil Rubbed Bronze (US10B), Satin Nickel (US15), Polished Brass Lifetime (US3), Unlacquered Brass (US3NL), and French Antique (US7). Unlacquered brass will patina over time, the lifetime polished brass will not, so choose based on whether you want the finish to age with the rest of the door hardware.

Omnia makes the D12036PD, a solid brass double dummy lever lockset with plates at 5-1/2 inch center to center. It's the same idea, a non-latching decorative plate set, but the wider 5-1/2 inch spacing gives a different proportion on the door than the Emtek's 3-5/8 inch. Omnia also does working versions of that plate, the D12036A single cylinder and the D12036AC double cylinder, if you decide you need the door to actually lock.

Both are dummy sets sold for non-latching trim. The Emtek 8095 Victoria is a brass sideplate set at 3-5/8 inch center-to-center, and the inside trim is specified from Emtek's knob and lever styles so both leaves can be matched to the rest of the house hardware. The Omnia D12036PD is a solid brass double dummy deadbolt lever set with plates at 5-1/2 inch center-to-center. If the existing plates on the opening are spaced at 5-1/2 inch, the Omnia matches that layout; if you are working to 3-5/8 inch, the Emtek 8095 is the one that lines up.

No. The Omnia D12036A is a single cylinder deadbolt lever lockset, meaning it carries a keyed deadbolt and working lever. The Emtek 8095 Victoria is a dummy pair with no keyed function, used as fixed pull trim on an inactive leaf or closet door. Swapping one for the other changes the door prep and the way the door operates, so they are not interchangeable even though both are brass sideplate-style sets.

The body and substrate are brass, and Emtek classifies the 8095 as residential hardware. For a high traffic commercial opening you'd want a graded commercial lockset rather than this decorative sideplate set.

It ships as a complete set with knob or lever, latch, and strike plate. On the dummy pair you won't be using the latch functionally since the set is surface mounted, but the hardware comes in the box.

The Omnia D12036A, D12036AC and D12036PD are all specified as lever locksets. The Emtek 8095 Victoria is ordered with a choice of inside trim that includes both knobs and levers across brass, crystal and marble designs, and handing is called out when a lever is selected. If the opening calls for a knob rather than a lever, the Emtek 8095 is the set that accommodates it.