Emtek 8141 STRETTO Narrow Trim Lockset, 2" x 10" Modern Rectangular, Brass Tubular, Dummy (Pair)
- Can be ordered with any Brass Knob or Lever
- Narrow 1-1/4" Door Preps, 3-3/8" C-to-C Hole Spacing
- Handing required for Leversets
Specifications:
- Door Thickness: 1-3/8" to 1-3/4"
- Mount: Surface Mount (no door prep required)
- Material: Brass
Manufacturer Resources
Product Specs
- Subcategory:
- Single Point Locksets
- Collection:
- Brass
- Product Type:
- Narrow Trim Locksets
- Product Group:
- Mechanical Locks
- Product Subgroup:
- Bored Locksets
- Commercial/Residential:
- Residential
- Lock Type:
- Tubular
- Keyed:
- No
- Keyed Function:
- Non-Keyed
- Lock Function:
- Dummy
- Series:
- STRETTO Modern Rectangular
- Theme:
- Contemporary
- Electronic:
- No
- MAP Policy:
- Yes
- Product Model:
- 8042
- Product Function:
- Dummy
- Product Size:
- 2" x 10"
- Product Shape:
- Rectangular
- Product Style:
- STRETTO
- Product Material:
- Brass
- Product Category:
- Mechanical Locks
- Product Substrate:
- Brass
- Department:
- Door Hardware
Emtek 8042-US26 – Frequently Asked Questions
1) Does the Emtek 8042 STRETTO dummy set actually latch, or is it just a pull?
It's a dummy set, so there is no latch and no turning mechanism. The knob or lever is fixed and works as a pull only. Use it on closet doors, double doors where one leaf stays fixed, or any opening held shut by a ball catch or roller catch. If you need the door to latch, you want a passage set instead; if you need privacy, a privacy set with a thumbturn.
2) Do I have to cut a bore hole in the door for the Emtek 8042 STRETTO narrow trim dummy?
No door prep is needed. The 8042 is surface mounted, so it fastens to the face of the door rather than through a 2-1/8 inch cross bore. That makes it workable on doors you don't want to drill through, including glass-panel and thin-stile doors where a standard bore would be a problem.
3) Do I need to specify handing on an Emtek 8042 dummy set?
Handing is a required selection, right hand or left hand. It matters for levers, which have to point the correct way when mounted. Stand outside the door: if the hinges are on your right it's right hand. Knobs are symmetrical, but the order still asks for a hand, so state the door's hand either way.
4) Is the Emtek 8042 dummy sold as one piece or a pair?
The 8042 ships as a pair, so you get trim for both faces of the door. That suits a single door you want to look finished on both sides, or one leaf of a double door. If you only need one face, a single dummy is the part to look for, not this one.
5) Can I choose the knob or lever style on the Emtek 8042 STRETTO plate?
Yes, and it's a required choice. The 8042 accepts any Emtek brass knob or lever, running from modern shapes like the Ace Knob, Spoke Knob, Stuttgart and Helios levers and the L-Square, T-Bar and R-Bar families (faceted, hammered, knurled, Tribeca, straight knurled, white marble) through traditional Cortina, Milano, Turino, Rope and Ribbon and Reed, plus crystal knobs such as Bristol, Windsor and Georgetown. Pick one trim style so both halves of the pair match.
6) Is the Emtek 8042 STRETTO lockset rated for commercial use?
It's a residential product. The 8042 is solid brass narrow trim with a contemporary rectangular look, aimed at homes and light-duty residential openings. For high-traffic commercial doors in an office, school or hospital corridor, look at a Grade 1 or Grade 2 cylindrical lockset instead.
7) Does the Emtek 8042 dummy take a key or have a thumbturn?
Neither. The 8042 is non-keyed with no cylinder and no privacy turn. It's a fixed pull. If the opening needs to lock, choose a keyed entry or privacy version of the STRETTO narrow trim instead.
8) What finishes does the Emtek 8042 STRETTO rectangular dummy come in?
Seven: Oil Rubbed Bronze (US10B), Polished Nickel (US14), Satin Nickel (US15), Flat Black (US19), Polished Chrome (US26), Unlacquered Brass (US3NL) and Satin Brass (US4). Unlacquered brass is the one that will patina over time rather than hold its as-shipped look, which matters if you're trying to match existing hardware in a unit.
How fast can I get the Emtek 8042-US26 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 8042-US26 come with a warranty?
Absolutely. The Emtek 8042-US26 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 8042-US26?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Emtek 8042-US26 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.