Emtek Modern Glass Bar Cabinet Pull, Schaub Collection

The Omnia 1968/102 Modern Cabinet Pull is the nearest match on the two things that matter for a swap: it is forged solid brass and it is built at 4 inch center-to-center spacing, and the Emtek Modern Glass Bar pull is a brass cabinet pull offered at 4 inch center-to-center. The visual difference is the glass element on the Emtek bar, so if the drawer fronts were specified for a glass-accented pull the Omnia reads as plain metal, but the hole spacing and the material are the same and the existing bores are reused.

No - they mount differently and solve different problems. The Schaub Sabre pulls, 10010 at 3 inch center to center, 10011 at 4 inch and 10012 at 5 inch, are edge pulls, meaning they are made to sit on the edge of the door or drawer face. The Emtek Modern Glass Bar is a face-mounted cabinet pull. The Schaub 10011 shares the 4 inch center to center spacing the Emtek is offered in, which is what makes the two look interchangeable in a spec list, but an edge pull will not land in a face-drilled drawer front.

The Emtek Modern Glass Bar cabinet pull is classified for residential use. For casework in a commercial setting, the Trimco 562 Series drawer pull covers 3-1/2 inch, 4 inch and 96mm center-to-center options, and the Trimco 553 Series is built at 3 inch center to center. The 562 at 4 inch matches the hole spacing the Emtek is offered in, so a change order on an already-bored run of drawer fronts does not force new holes.

Ten finishes at 4 inch spacing: Oil Rubbed Bronze (US10B), Polished Nickel (US14), Satin Nickel (US15), Pewter (US15A), Flat Black (US19), Polished Chrome (US26), Polished Brass Lifetime (US3), Unlacquered Brass (US3NL), Satin Brass (US4) and French Antique (US7). Unlacquered brass will darken and patina with handling, while the Lifetime polished brass is finished to stay bright, so pick deliberately if you want the kitchen to look the same in two years.

Brass, both the material and the substrate. Emtek rates the Glass Bar as residential hardware, so for a rental turn or an owner-occupied kitchen it is a fair choice, but for a commercial break room or a hospitality property with constant daily use a heavier commercial-duty bar pull is the safer specification. The glass bar is the design element here, not an impact-resistant part.

The Glass Bar puts a glass grip on brass posts instead of a solid metal bar, so it reads as a decorative element rather than a utility pull. If you want the same modern bar shape in all metal, the Deltana SBP35 Modern Square Bar Pull is a heavy-duty solid brass square bar at 3-1/2 inch, and the Omnia 1968 series is a forged solid brass modern pull at 4 inch center to center. Go all metal where the pull takes abuse or gets cleaned aggressively; go glass where the cabinetry is the finish work.

The Glass Bar itself goes out to 12 inch center to center, which covers most refrigerator and pantry panel applications. If you would rather have a dedicated appliance pull in a rugged industrial look, the Schaub 79-8 Steamworks is an 8 inch appliance pull. Appliance panels usually want the longer grip and a sturdier mount than a drawer pull gives you.

No. A projecting bar pull will foul a bypass door as it passes its neighbor. For a sliding panel or a door with no clearance you want a recessed or edge pull instead, such as the Schaub Sabre edge pulls offered at 3 inch, 4 inch and 5 inch center to center. Save the Glass Bar for hinged doors and drawer fronts where the grip can stand proud of the face.

Among the Omnia modern pulls, the 1969 and the 1971 are both built at 1-3/16 inch projection, while the 1970 stands off at 1-1/4 inch. If knuckle clearance in a tight galley or against an adjacent appliance panel is driving the choice, the 1969 and 1971 sit closer to the face by a sixteenth of an inch than the 1970 does.

The Orca Hardware CK-12001 T-Pull Bar is steel in satin nickel with a 2 inch bar width. The Emtek Modern Glass Bar cabinet pull is brass and is offered in Satin Nickel (US15) among its finishes, so the finish reads the same on the run while the substrate changes from brass to steel.

The Schaub 79-8 Steamworks 8 inch pull is an appliance pull, sized and rated for the weight of a panel-front refrigerator or range door, where the Emtek Modern Glass Bar is a cabinet pull running 3 inch to 12 inch center to center for drawers and doors. Pairing the two is the usual approach on a panel-ready kitchen: the appliance pull carries the panel, the cabinet pulls carry the casework.

Yes, and it is the usual approach: bar pulls on drawers, knobs on doors. The Glass Bar sits in Emtek's Glass and Porcelain collection, so pairing it with other glass or porcelain knobs in the same finish keeps the look consistent. If you want a plain metal knob to sit alongside, the Orca Hardware Bachelor Collection round cabinet knob is 1-1/4 inch diameter and the Blackcomb square knob is 25mm.

No handing. It is a symmetrical two-post bar pull, so it mounts vertically on doors or horizontally on drawers with no left or right version to specify. All you specify when ordering is the center-to-center spacing and the finish.

The 4 inch center-to-center Glass Bar pull in Satin Brass (US4) is Emtek part number 86724US4. Emtek's numbering carries the finish suffix on the end, so the same body in another finish changes only that trailing code.

Yes, and the knob options are single-hole rather than two-hole. The Orca Hardware Bachelor Collection CK-15030 is a round cabinet knob at 1-1/4 inch diameter, the CK-16030 is the round ring version at the same 1-1/4 inch diameter, and the Blackcomb CK-17025 is a square cabinet knob at 25mm diameter. All three are knobs, so they take one bore per door, while the Emtek Modern Glass Bar pull is a two-hole cabinet pull with a center-to-center spacing to match.