Emtek Modern Glass Cabinet Pull, Schaub Collection

Yes, if your holes are drilled 4 inches on center. The Modern glass pull is offered in a 4 inch center-to-center spacing in every finish, so it drops straight onto an existing 4 inch two-hole drilling with no new boring. The Modern series as a whole spans 3 inch to 12 inch center-to-center.

They are classed as residential hardware. For casework in a commercial or high-traffic institutional space, a metal bar pull is the more sensible choice: the Deltana SBP35 Modern Square Bar Pull is described as heavy-duty solid brass, and the Orca Hardware CK-12001 T-Pull Bar is steel with a 2 inch bar width. Glass inserts in a multi-family or hospitality setting are a replacement item you will be buying again.

No. The Modern glass pull is a cabinet pull for doors and drawer fronts, topping out at 12 inch center-to-center in the series. Appliance panels want a dedicated appliance pull with a heavier mounting; the Schaub 79-8 Steamworks 8 inch pull is catalogued as an appliance pull and is the right class of part for that job.

The Omnia 1968/102 Modern Cabinet Pull is the nearest match on the two things that matter for a swap: it is a modern-style cabinet pull in forged solid brass at 4 inch center-to-center spacing, which lines up with the 4 inch center-to-center Emtek Modern Glass pull and its brass construction. The difference is the grip itself - the Emtek pull carries a glass element from the Glass and Porcelain collection, while the Omnia 1968/102 is brass throughout. Screw holes at 4 inch spacing mean no new drilling in the door or drawer front.

The Emtek Modern Glass Cabinet Pull is designated for residential use. For a commercial casework or millwork package, the Trimco 562 Series drawer pull is built for that channel and comes in 3-1/2 inch, 4 inch, and 96mm center-to-center options, so it covers the 4 inch spacing the Emtek pull uses; the Trimco 553 Series covers 3 inch center-to-center. Both are plain metal drawer pulls without the glass grip.

No. Mounting screws are included with the pull. Standard cabinet doors and drawer fronts are covered; unusually thick fronts or a false-front drawer box may need longer screws sourced separately.

Brass, both as the stated material and as the substrate, with glass as the decorative element in the grip. That matters for the unlacquered brass (US3NL) option in particular, since it is meant to patina with handling rather than hold a coated finish.

The Omnia 1968/102 is a forged solid brass modern cabinet pull at the same 4 inch center-to-center spacing, so it lands on identical hole drilling. Omnia also lists the 1969 and 1971 at 1-3/16 inch projection and the 1970 at 1-1/4 inch projection if knuckle clearance in front of the door is a concern.

Not for a flush or sliding front. A projecting grip pull needs clearance in front of the face. For those openings look at an edge pull instead: Schaub's Sabre edge pulls come in 3 inch (10010), 4 inch (10011), and 5 inch (10012) center-to-center in solid brass, and mount at the door edge.

The Emtek Modern Glass Cabinet Pull is a residential cabinet pull in brass with a glass grip. For an appliance panel, the Schaub 79-8 Steamworks 8 inch pull is designated as an appliance pull, which is the category built for the weight and leverage of a refrigerator or range door. If you want the Emtek look to continue onto longer runs, its center-to-center range does extend to 12 inch.

For heavy daily use, the Deltana SBP35 Modern Square Bar Pull is a heavy-duty solid brass bar pull at 3-1/2 inch center-to-center, with no glass component to chip. The Emtek Modern Glass pull is a brass pull with a glass grip from the Glass and Porcelain collection. Note the spacing gap: the Deltana is 3-1/2 inch while the Emtek Modern Glass pull runs from 3 inch to 12 inch center-to-center, so confirm your existing hole spacing before switching.

They share the 4 inch center-to-center dimension but they are not interchangeable. The Schaub 10011 is an edge pull in solid brass, a pull designed to mount at the edge of a door or drawer face rather than standing off the front. The Emtek Modern Glass Cabinet Pull is a front-mounted cabinet pull with a glass grip. Swapping one for the other changes where the hardware sits on the cabinet, not just how it looks. Schaub also lists the 10010 edge pull at 3 inch and the 10012 at 5 inch center-to-center.

The Emtek Modern Glass Cabinet Pull mounts on two screws at spacings from 3 inch to 12 inch center-to-center. If a single-hole knob suits the door better, the Orca Hardware CK-15030 Bachelor Collection round cabinet knob is 1-1/4 inch in diameter, the CK-16030 is a round ring knob at the same 1-1/4 inch diameter, and the CK-17025 Blackcomb Collection knob is square at 25mm diameter. All three are knobs rather than pulls, so they need one hole instead of a matched pair.

They belong to Emtek's Glass and Porcelain collection, so they are meant to be specified alongside the other glass and porcelain knobs and pulls in that group and finished in the same US code. Order every opening in one finish batch when you can, since unlacquered brass (US3NL) in particular will not match a piece added later that has already started to age.

The Emtek Modern Glass Cabinet Pull is brass with a glass grip. If you want steel, the Orca Hardware CK-12001 T-Pull Bar is a steel pull with a 2 inch bar width in satin nickel. Satin nickel is also one of the finishes the Emtek Modern Glass pull is offered in, so the two can sit near each other in the same room without a finish mismatch.

All three are forged solid brass modern cabinet pulls and they separate on projection, which is how far the grip stands off the cabinet face: the Omnia 1969 and the Omnia 1971 are both 1-3/16 inch projection, while the Omnia 1970 is 1-1/4 inch. Projection matters where a drawer sits next to a wall or an appliance handle. The Emtek Modern Glass Cabinet Pull is also brass but carries a glass grip and is offered from 3 inch to 12 inch center-to-center.