Emtek Sandcast Bronze Rustic Modern Edge Cabinet Pull, Schaub Collection

Yes, every finish is offered in every size. Flat Black Bronze, Medium Bronze and Tumbled White Bronze each come in 1-1/2 inch, 4-1/2 inch and 10-1/2 inch center to center, so you can run small drawers, base cabinets and a tall door in one finish without breaking the set. Three finishes and three spacings is the whole matrix, so there is no size that locks you out of a finish.

The Sandcast Bronze Rustic Modern Edge is made at 1-1/2 inch, 4-1/2 inch and 10-1/2 inch center to center, so a front drilled at 4 inch centers will not pick up its existing holes. The Omnia 1968/102 is a modern cabinet pull in forged solid brass built at 4 inch center to center, and the Trimco 562 Series drawer pull is offered in 3-1/2 inch, 4 inch and 96mm center to center. If the fronts are bored at 3-1/2 inch centers instead, the Deltana SBP35 is a modern square bar pull at 3-1/2 inch in heavy-duty solid brass. Any of the three drops onto existing holes at its stated spacing, where moving to the 4-1/2 inch Rustic Modern Edge means new boring and plugged holes in the old ones.

They are two different mounting types even though both names carry the word edge. The Sandcast Bronze Rustic Modern Edge is a cabinet pull that mounts to the face of the door or drawer front on two centers, offered at 1-1/2 inch, 4-1/2 inch and 10-1/2 inch. The Schaub 10010, 10011 and 10012 Sabre parts are edge pulls, made at 3 inch, 4 inch and 5 inch center to center. Ordering a Sabre edge pull to replace a face-mounted bronze pull gives you a different hardware type on the door, not a like-for-like swap, so confirm which style the millwork was detailed for before you buy either one.

At 10-1/2 inches center to center, the longest Rustic Modern Edge is in appliance-pull territory and works on a panel-ready fridge or dishwasher front, in Flat Black Bronze, Medium Bronze or Tumbled White Bronze. If you want a dedicated appliance pull in a different look, Schaub's 79-8 Steamworks is an 8 inch appliance pull. Match the spacing to the panel: a two-hole appliance front already bored at another dimension will not take the 10-1/2 without new holes.

Not exactly, and that is the nature of the product. These are cast bronze from Emtek's Sandcast Bronze collection, so surface texture and color read a little differently from piece to piece, and Medium Bronze and Tumbled White Bronze are living finishes that darken and lighten with handling over time. If you are hardware-ing a whole kitchen or a block of units, order the full count in one go rather than topping up later, and hold a spare or two for damage replacement.

Two things: center to center spacing and finish. Spacing is 1-1/2, 4-1/2 or 10-1/2 inches, and finish is Flat Black Bronze (FB), Medium Bronze (MB) or Tumbled White Bronze (TWB). The finish code rides on the end of the part number, so the 4-1/2 inch in Flat Black Bronze is SPC86665FB. Get both right on the order and the pull drops onto the drilled front; get the spacing wrong and no finish choice saves it.

Three Omnia modern cabinet pulls are built to a stated stand-off: the 1969 and the 1971 are forged solid brass at 1-3/16 inch projection, and the 1970 is forged solid brass at 1-1/4 inch projection. That number is what you check against a run where a drawer front sits close to a wall return, an adjacent appliance, or a door swing. All three are face-mounted pulls in the same family of use as the Sandcast Bronze Rustic Modern Edge, so the decision between them comes down to the projection you can live with and the center to center your fronts are bored for.

The Sandcast Bronze Rustic Modern Edge is a cabinet pull, with its longest run at 10-1/2 inch center to center. For the appliance panel itself, the Schaub 79-8 Steamworks is an 8 inch cabinet pull built as an appliance pull, which is the grip length and duty an integrated refrigerator or freezer panel is normally detailed with. Appliance panels take more force per pull than a drawer front does, so it is worth specifying the appliance pull on those doors and keeping the cabinet pull on the cabinetry rather than running one part everywhere.

The smallest Sandcast Bronze Rustic Modern Edge is 1-1/2 inch center to center, which still needs two holes bored in the stile. Where there is not room for that, a knob takes one hole: the Orca Hardware CK-15030 is a round cabinet knob at 1-1/4 inch diameter, the CK-16030 is a round ring cabinet knob at 1-1/4 inch diameter, and the CK-17025 Blackcomb is a square cabinet knob at 25mm. Knobs are common on narrow door stiles and small upper doors, with pulls carried on the drawer banks, so mixing the two across one kitchen is a normal specification rather than a compromise.

The Sandcast Bronze Rustic Modern Edge is a bronze part, finished as Flat Black Bronze, Medium Bronze or Tumbled White Bronze. If the package is running satin nickel, the Orca Hardware CK-12001 T-pull bar is a steel pull in satin nickel with a 2 inch bar width. That is a different substrate and a different finish family, so decide it at the package level rather than door by door, since bronze and nickel sitting side by side in the same room reads as two hardware schedules.

The Sandcast Bronze Rustic Modern Edge is made to imperial centers at 1-1/2 inch, 4-1/2 inch and 10-1/2 inch. For fronts bored to metric, the Trimco 562 Series drawer pull includes a 96mm center to center option alongside its 3-1/2 inch and 4 inch sizes, which is the spacing most European frameless casework arrives drilled at. On the knob side, the Orca Hardware CK-17025 Blackcomb square cabinet knob is dimensioned at 25mm and takes a single hole, so metric center to center does not enter into it.

Mounting screws ship with the pull, so a standard bored drawer front or door needs nothing else at the bench. Thick applied panels and doubled-up appliance fronts run deeper than a normal 3/4 inch front, and those take longer machine screws in the same 8-32 thread, picked up separately.

Emtek specifies the Rustic Modern Edge as residential hardware, and it reads that way: cast bronze with a rustic-leaning profile aimed at kitchens, baths and millwork in homes and multi-family units. For commercial casework where you want steel rather than cast bronze, the Orca Hardware CK-12001 T-pull bar is a steel pull in satin nickel with a 2 inch bar width.

The Sandcast Bronze Rustic Modern Edge is a bronze pull, sold in Flat Black Bronze, Medium Bronze and Tumbled White Bronze. The Deltana SBP35 modern square bar pull is heavy-duty solid brass at 3-1/2 inch, and the Omnia 1968/102, 1969, 1970 and 1971 modern cabinet pulls are forged solid brass. Bronze and brass take and hold finish differently and age differently in a kitchen, which is what decides the choice when a client wants a living finish that darkens with handling versus one that stays as delivered.