Emtek Sandcast Bronze Twig Cabinet Pull, Schaub Collection

The Twig sandcast bronze pull is made in 3 inch, 3-1/2 inch, 4 inch and 6 inch center-to-center. Those are the hole spacings you drill or match on an existing door or drawer front, so measure hole-center to hole-center on what you are replacing before you pick a size. If your existing bore spacing is one of those four, the Twig drops onto the same holes with the mounting screws that come with it.

Emtek lists the Twig sandcast bronze pull as residential. For a hospitality millwork package or a common-area casework run where the specifier wants a commercial pull, look at a heavy-duty bar pull instead, such as the Deltana SBP35 Modern Square Bar Pull in solid brass at 3-1/2 inch center-to-center, or an Orca Hardware CK-12001 T-Pull Bar in steel. The Twig belongs in kitchens, baths and residential built-ins.

The Twig tops out at 6 inch center-to-center, which is a drawer and door size, not an appliance size. Panel-ready appliance fronts normally take a long pull sized to the panel. For that, the Schaub 79-8 Steamworks 8 inch cabinet pull is catalogued as an appliance pull and is the better call. Use the Twig on the surrounding cabinetry and pair it with a longer pull on the appliance.

No. The Twig is made in inch spacings only: 3, 3-1/2, 4 and 6 inch. 96mm falls between 3-1/2 and 4 inch and will not line up with either without redrilling. For a direct 96mm replacement, the Trimco 562 Series drawer pull is offered with a 96mm center-to-center option alongside 3-1/2 and 4 inch.

The Emtek Twig cabinet pull is offered in a 3 inch center-to-center size. For the same 3 inch center-to-center spacing from another brand, the Trimco 553 Series drawer pull is a 3 inch center-to-center drawer pull, and the Schaub 10010 Sabre is a solid brass edge pull with 3 inch center-to-center spacing. The Twig is an organic branch-form pull in sandcast bronze; the Trimco 553 is a plainer drawer pull and the Schaub 10010 mounts as an edge pull along the edge of a door or drawer face, so the hole spacing matches but the look and mounting position do not.

The Emtek Twig cabinet pull covers 3-1/2 inch and 4 inch center-to-center among its sizes. If you want a different look on the same drilling, the Trimco 562 Series drawer pull is offered in 3-1/2 inch, 4 inch, and 96mm center-to-center options, the Deltana SBP35 is a 3-1/2 inch modern square bar pull in solid brass, and the Omnia 1968/102 is a forged solid brass modern cabinet pull with 4 inch center-to-center spacing. All three read as modern or square bar profiles, while the Twig is a rustic branch form in sandcast bronze.

They are not a like-for-like swap. The Emtek Twig is a cabinet pull with two mounting holes on 3 inch to 12 inch center-to-center spacing. The Orca Hardware CK-15030 Bachelor Collection round knob and CK-16030 round ring knob are both 1-1/4 inch diameter cabinet knobs, and the Orca CK-17025 Blackcomb square knob is a 25mm diameter cabinet knob. A knob mounts on a single hole, so swapping one in for the Twig leaves the second hole in the drawer face exposed unless the door is redrilled or the face is replaced.

Mounting screws ship with the pull. Nothing else is required for a standard drawer front or cabinet door with existing bores at a matching spacing. If your fronts are unusually thick, a longer machine screw in the same thread is the only thing you would add.

Three finishes: Flat Black Bronze (FB), Medium Bronze (MB) and Tumbled White Bronze (TWB). All three are living bronze finishes on a sandcast body, so they carry the surface texture of the casting rather than a plated, uniform look. If you are matching other Emtek Sandcast Bronze pieces already in the kitchen, stay within the same finish code across the run.

Yes, and that is the usual approach: Twig pulls on drawers and larger doors, knobs on upper doors. Emtek runs the Twig look across the Sandcast Bronze collection, so a knob in the same collection and finish code matches. If you want a plainer knob alongside a rustic pull, the Orca Hardware Bachelor Collection round cabinet knob at 1-1/4 inch diameter is a simple round option, and the Blackcomb square knob at 25mm is the squared version of the same idea.

Form and finish behavior. The Twig is a cast bronze branch shape in a rustic idiom, offered in living bronze finishes. A modern bar pull is a straight extruded or forged bar, such as the Omnia 1968/102 forged solid brass pull at 4 inch center-to-center or the Deltana SBP35 square bar pull at 3-1/2 inch. If the cabinetry is shaker, rift oak or contemporary slab, the bar reads correctly; if it is knotty alder, reclaimed timber or a lodge interior, the Twig is the one that belongs.

Order by center-to-center plus finish code. The 3 inch is SPC86061 (SPC86061FB in Flat Black Bronze, SPC86061MB in Medium Bronze), the 3-1/2 inch Medium Bronze is SPC86062MB, the 4 inch is SPC86063 (SPC86063FB, SPC86063MB), and the 6 inch Medium Bronze is SPC86252MB. The suffix is the finish: FB, MB or TWB.

They solve different openings. The Emtek Twig cabinet pull mounts on the face of the door or drawer and projects outward as a branch-form bronze pull. The Schaub Sabre edge pulls - the 10010 at 3 inch center-to-center, the 10011 at 4 inch, and the 10012 at 5 inch - are edge pulls in solid brass, designed to sit at the edge of the panel rather than out on the face. If the design calls for a pull you grab from the front of the door, the Twig is the face-mounted option; the Sabre edge pulls suit a flush or minimal-projection detail.

The Emtek Twig cabinet pull runs up to 6 inch center-to-center. For a longer grip on an appliance panel, the Schaub 79-8 Steamworks is an 8 inch cabinet pull with an appliance pull function. The Orca Hardware CK-12001 is a steel T-pull bar with a 2 inch bar width in satin nickel, which gives a wider bar section to grab than a cast decorative pull. The Twig is a residential-rated decorative pull in bronze, so on a heavy appliance door the longer appliance-specific pulls spread the load across a wider mounting span.

The Emtek Twig cabinet pull comes in Flat Black Bronze, Medium Bronze, and Tumbled White Bronze. If the rest of the room is satin nickel, the Orca Hardware CK-12001 T-pull bar is offered in steel with a satin nickel finish at a 2 inch bar width. The Twig's three bronze finishes suit a warm rustic palette, while the satin nickel bar pull matches cooler modern hardware.

Bronze, sandcast. Emtek lists both the material and the substrate as bronze, so the finish is on solid metal rather than a coating over zinc or plated steel. Sandcasting is why no two pieces are identical in surface texture, which is the point of the twig-branch form.

No. The SDC SP50 is a 50mm spindle used in door control hardware, not a cabinet pull. The Emtek Twig is a cabinet pull that mounts to a cabinet door or drawer face and ships with mounting screws. If you are ordering pull hardware for casework, the spindle is not part of that assembly.