Falcon 8231 Pull Side Standard...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$3,364.00
$1,421.00
Falcon 8231 Pull Side Standard Arm Automatic Door Operator, Surface Mount, 689 Aluminum Finish

Falcon 8231 Pull Side Standard Arm Automatic Door Operator Surface Mount ADA Compliant

(No reviews yet) Write a Review

Model: 8231AL
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$3,364.00
$1,421.00
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Falcon 8231 Pull Side Standard Arm Automatic Door Operator Surface Mount with ADA Compliance

Professional ADA-Compliant Automatic Door Control Solution

The Falcon 8231 automatic door operator from the 8200 Series delivers smooth door control for openings requiring flexible accessibility and Americans with Disabilities Act (ADA) compliance. This surface-mounted operator features a 26" header length, supports doors up to 200 lbs., and includes intelligent control with on-board 12 VAC power supply. The non-handed design accommodates various installation requirements while providing cycle-tested durability for 1 million gearbox operations.

Professional Features & Benefits

  • ADA Compliance: Meets Americans with Disabilities Act requirements for accessible door operation in commercial applications.
  • Heavy-Duty Performance: Cycle-tested to 1 million gearbox operations for long-term reliability in high-traffic environments.
  • Door Weight Capacity: Supports doors up to 200 lbs. with consultation available for heavier applications through Technical Services.
  • SmartLatch Technology: Provides additional closing force for enhanced security and peace of mind in commercial installations.
  • Push 'n' Go Feature: Opens door automatically upon activation of push bar for improved accessibility.
  • Open Position Learning: Learns opening position angles to eliminate wall and door damage during operation.
  • Obstacle Detection: Automatically stops and reverses door direction when obstacles are detected for safety.
  • Installation-Ready Design: Features 1-piece mounting bracket, LED light illumination for installation, and pre-load strike assist for easier setup.

Technical Specifications

  • ADA Compliant: Yes
  • BAA Qualified: Yes
  • Commercial/Residential: Commercial
  • Department: Door Hardware
  • Door Hand Direction: Non-Handed
  • Duty Level: Heavy Duty
  • Grade: Grade 1
  • Product Category: Door Controls
  • Product Group: Door Controls
  • Product Subgroup: Power Operators
  • Product Substrate: Aluminum
  • Product Type: Door Operators
  • Series: 8200 Series
  • Subcategory: Surface Mounted Closers

Installation & Operation

  1. Verify door weight does not exceed 200 lbs. and confirm door construction is suitable for automatic operator installation.
  2. Mount the 1-piece mounting bracket to the door frame header ensuring proper alignment with the 26" header length requirement.
  3. Connect the on-board 12 VAC power supply following manufacturer wiring diagrams and local electrical codes.
  4. Install the standard arm assembly for pull side mounting, connecting to the automatic operator and track arm components.
  5. Adjust the standard arm using provided adjustment screws to accommodate the specific door opening requirements.
  6. Configure SmartLatch settings and Push 'n' Go activation parameters per application requirements.
  7. Test all functions including obstacle detection, Open Position Learning calibration, and ADA compliance operation. Refer to manufacturer documentation for complete installation specifications and programming instructions.

Professional Applications

  • Assisted Living Facilities
  • Multi-Family Residential Properties
  • Healthcare Institution Entrances
  • Educational Facility Accessibility Points
  • Commercial Office Building Entrances
  • Retail Establishment Access Points
  • Government and Municipal Building Compliance

Why Choose Falcon Quality?

Falcon 8200 Series automatic door operators deliver professional-grade reliability with aluminum construction and intelligent control systems rated for 1 million gearbox cycles. Grade 1 heavy-duty performance ensures dependable ADA-compliant operation in demanding commercial applications. The integrated SmartLatch technology and obstacle detection features provide enhanced security and safety for facilities requiring accessible door control solutions.

Product Specs

Subcategory:
Surface Mounted Closers
Series:
8200 Series
ADA Compliant:
Yes
BAA Qualified:
Yes
Product Group:
Door Controls
Product Subgroup:
Power Operators
Product Type:
Door Operators
Duty Level:
Heavy Duty
Grade:
Grade 1
Commercial/Residential:
Commercial
Door Hand Direction:
Non-Handed
Product Category:
Door Controls
Product Substrate:
Aluminum
Department:
Door Hardware

Falcon 8231AL – Frequently Asked Questions

1) Is the Falcon 8231 door operator mounted on the pull side or the push side of the door?
Pull side, with a standard arm. The 8231 surface mounts to the header on the side the door pulls toward, and the standard arm assembly connects the operator to the door. If your application puts the operator on the push side of the opening, this configuration is not the one to order. Confirm which side of the opening the header face is on before you pick the arm.
2) Do I have to order a left hand or right hand version of the Falcon 8231?
No handing to specify. The 8231 is non-handed, and the motor gearbox itself is non-handed, so one unit covers both swings. For a property manager or contractor standardizing across a building, that means a single part number stocks for every opening instead of splitting inventory into lefts and rights.
3) How much header space does the Falcon 8231 operator need above the door?
The 8231 uses a 26 inch header length, so you need that much clear, solid header face to land the unit and its one piece mounting bracket. Check that measurement against the opening first, especially on storefront and aluminum frames where the header face is short or interrupted by glass stops. The bracket mounts as a single piece, which keeps the layout to one alignment rather than shimming separate mounting points.
4) Will the Falcon 8231 satisfy the accessible entrance requirement on my building?
The 8231 is an ADA compliant operator built for commercial openings, which is the reason most buyers put it on an entrance in the first place: assisted living, healthcare, schools, multi family, offices, retail, and municipal buildings. It is a commercial rated Grade 1 heavy duty unit, not a residential accessory. The operator handles the powered opening; the actuators and any door position or safety devices your local code official requires for the specific opening still have to be part of the package.
5) Is the Falcon 8231 operator Buy American compliant for a federal or municipal project?
The 8231 is BAA qualified, so it can go into a Buy American Act procurement. Government, municipal, and publicly funded institutional work is one of the applications this operator is built for, and the BAA qualification is the piece that usually decides whether a spec submittal gets approved or kicked back.
6) Does the Falcon 8231 automatic operator need a separate transformer or external power supply?
Power is on board. The 8231 includes a 12 VAC power supply integrated into the operator, so the install is a supply circuit run to the unit and wiring per the manufacturer diagrams and local electrical code, not a separate transformer cabinet to find room for. That matters on a retrofit where there is no existing hardware closet near the opening.
7) Will an automatic operator still pull the door tight enough to latch on a weatherstripped exterior opening?
That is what SmartLatch on the 8231 addresses. It applies additional closing force at the end of the cycle so the door seats and secures rather than resting against a stiff gasket, and pre load strike assist helps the door take the strike on setup. On an exterior entrance with weatherstripping or stack pressure in the corridor, that closing force is the difference between a door that latches every cycle and one a property manager gets called about.
8) Can the Falcon 8231 open the door without a wall actuator being pressed?
Push 'n' Go handles that. Activate the push bar and the 8231 takes over and opens the door automatically, so someone who has already reached the door does not have to back up and find a wall plate. Wall or wireless actuators are still what you use for a hands free approach from a distance; Push 'n' Go covers the person already at the leaf.
9) What keeps an automatic operator from slamming the door into the wall or into someone walking through?
Two things on the 8231. Open Position Learning calibrates the actual opening angle of your installation so the door stops where it should instead of driving into an adjacent wall or overextending the arm. Obstacle detection stops and reverses the door when something is in the way during a cycle. Both are set up during commissioning, so the operator has to be run through its learning routine after mounting, not just powered on.
10) What finish does the Falcon 8231 operator come in, and will it match aluminum storefront?
One finish: 689 aluminum, ordered as 8231AL. The cover and housing are aluminum, so it reads as a match against clear anodized aluminum storefront and the 689 painted aluminum finish used across most commercial door hardware lines. If the rest of the opening is dark bronze or a plated finish, this operator will not blend, and there is no alternate finish on the 8231 to order instead.
11) Does the Falcon 8231 replace an existing surface door closer on the same opening?
The 8231 mounts to the header face on the pull side, which is where a surface closer already sits on most commercial openings, and it does the closing itself, so the mechanical closer comes off rather than working alongside it. What decides the retrofit is the header: you need 26 inches of usable header length for the mounting bracket, the door has to be 200 lbs or under, and power has to reach the operator for the on board 12 VAC supply. Verify those three on the existing opening before committing to the swap.
12) Is the Falcon 8231 automatic door operator suitable for a house or apartment unit door?
It is a commercial operator, not a residential one. The 8231 is Grade 1 heavy duty, cycle tested to 1 million gearbox operations, and sized for entrances that see constant traffic. On multi family property it belongs on the building entrance, the vestibule, or a common area accessible route, not on an individual apartment door.
13) How hard is the Falcon 8231 to commission once it is mounted?
Setup is built into the unit. LED illumination lights the work during installation and gives you feedback at the control box, the mounting bracket is a single piece so alignment is one operation, and the standard arm has adjustment screws to dial in for the specific opening. After that you configure SmartLatch and Push 'n' Go, run the Open Position Learning calibration, and test obstacle detection before turning the opening over.
How fast can I get the Falcon 8231AL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Falcon 8231AL come with a warranty?
Absolutely. The Falcon 8231AL is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Falcon 8231AL?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Falcon 8231AL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!