HALO LT 4" Recessed LED Baffle...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$13.39
$12.49
HALO LT LT 4" Recessed Baffle LED Trim

HALO LT 4" Recessed LED Baffle Trim 8W 5000K Daylight White

(No reviews yet) Write a Review

Model: LT4069FS1EWHR

In Stock (leaves warehouse same day if ordered before 3pm ET)

$13.39
$12.49
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

HALO LT 4" Recessed LED Baffle Trim

Professional LED Lighting Solution for Modern Applications

The HALO LT 4" Recessed LED Baffle Trim delivers efficient 8W LED performance with crisp 5000K daylight white illumination. This professional-grade recessed lighting solution features a matte white plastic non-conductive dead-front trim with regressed flat lens, providing 650 lumens of reliable light output at 0.067A current draw on 120V systems.

Professional Features & Benefits

  • 8W LED Efficiency: Low power consumption delivers cost-effective operation while maintaining bright 650-lumen output for professional applications.
  • 5000K Daylight White: Crisp color temperature provides excellent visibility and color rendering for task lighting and general illumination needs.
  • 4" Recessed Design: Compact diameter fits standard recessed housings while delivering focused light distribution for targeted illumination.
  • Dimming Capability: Dims to 10% with compatible phase cut LE/TE dimmers on 120V input, offering flexible light control options.
  • Non-Conductive Trim: Matte white plastic dead-front construction with regressed flat lens ensures safe installation and professional appearance.
  • Low Amperage Draw: 0.067A current requirement minimizes electrical load while maximizing circuit capacity utilization.

Technical Specifications

  • Amperage Rating: 0.067A
  • Arra Compliant: No
  • Brightness: 600 lumens (nominal)
  • Color Temperature: 5000K
  • Department: Electrical
  • Dimming: Dims to 10% (phase cut LE/TE) with compatible dimmers; 120V input
  • Lamp Type: LED
  • Lens Trim: Matte white plastic non-conductive dead-front trim and regressed flat lens
  • Lumens: 650
  • Marketpro Us Flag: Yes
  • Mounting Method: Recessed
  • Product Diameter: 4 Inch
  • Product Wattage: 8W
  • Voltage Rating: 120V

Professional Applications

  • Residential Interior Lighting
  • Commercial Office Spaces
  • Retail Display Areas
  • Professional Offices
  • Hospitality Facilities
  • Educational Environments
  • Healthcare Facilities

Why Choose HALO LT Quality?

HALO LT delivers reliable LED lighting performance with professional-grade construction and efficient 8W operation. The matte white non-conductive trim design ensures safe installation while providing consistent 5000K daylight illumination for demanding applications.

Manufacturer Resources

Spec Sheet

Product Specs

Amperage Rating:
0.067A
Arra Compliant:
No
Brightness:
600 lumens (nominal)
Department:
Electrical
Lamp Type:
LED
Lumens:
650
Marketpro Us Flag:
Yes
Mounting Method:
Recessed
Product Diameter:
4 Inch
Product Wattage:
8W
Voltage Rating:
120-277V
Product Group:
Lighting
Light Temperature:
5000K
Product Type:
Recessed Trim
Installation Location:
Indoor/Outdoor
Indoor Outdoor:
Indoor/Outdoor
Product Subgroup:
Recessed Lighting

Halo LT4069FS1EWHR – Frequently Asked Questions

1) Does the HALO LT4069 recessed LED trim work with my existing dimmer switch?
It dims down to 10 percent, but only on phase cut LE/TE (leading or trailing edge) dimmers rated for LED loads, with 120V at the fixture. An older incandescent-only dimmer will typically drop out, flicker, or refuse to go low. At 8W and 0.067A draw, one trim is a very small load, so on a run of these check the dimmer's minimum load as well as its LED rating.
2) Is 5000K too cold for an apartment or hotel room ceiling?
5000K is daylight white, the coolest of the common residential and commercial color temperatures, and it reads crisp and blue-white next to a 2700K or 3000K warm lamp. It works well in kitchens, baths, garages, back-of-house, corridors, and task areas. For guest rooms, lobbies, and living spaces where a warm look is expected, most property managers spec 2700K or 3000K instead. If you are relamping part of a building, match what is already in the ceiling; mixed color temperature on one corridor is the most common callback on trim swaps.
3) Will the HALO LT 4 inch LED trim run on 277V in a commercial building?
The trim carries a 120-277V voltage rating, so it is usable on the 277V lighting circuits common in commercial and institutional buildings as well as standard 120V. Dimming is the exception: the 10 percent phase cut LE/TE dimming is specified at 120V input, so plan 277V runs as switched rather than dimmed.
4) How many of these HALO 4 inch LED trims can I put on one 15 amp circuit?
Each trim draws 0.067A at 120V and 8W. That is a very light load, so circuit capacity is almost never the constraint on a job like this; your limit ends up being the dimmer's maximum load and how you have the branch laid out, not the fixture count. Confirm the dimmer's LED wattage rating before sizing a long run.
5) What does the trim on the HALO LT4069 look like, and will it show glare from below?
Matte white plastic, non-conductive dead-front, with a regressed flat lens. Regressing the lens sets the light source back up inside the trim, which cuts the direct view of the diode from normal standing angles. The dead-front plastic construction means no live metal at the ceiling opening.
6) Is the HALO LT4069 ARRA compliant for a federally funded job?
No. The LT4069 is not ARRA compliant, so if your project carries an ARRA domestic sourcing requirement this trim will not satisfy it and you need to spec a compliant fixture instead.
7) Do I need to buy a separate LED bulb for the HALO LT 4 inch baffle trim?
No separate lamp. The LED is integral to the trim, which is why it is specified as 8W, 650 lumens, and 5000K as a single assembly rather than as a socket that takes a bulb. You wire it to the housing and you are done; when it eventually fails, the trim is what gets replaced, not a bulb.
8) What model number do I order for the HALO LT 4 inch 5000K recessed LED trim?
Order model LT4069FS1EWHR. That is the single configuration for the 4 inch, 8W, 5000K white baffle trim, so there is no separate finish or color temperature to specify on the order.
How fast can I get the Halo LT4069FS1EWHR delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Halo LT4069FS1EWHR come with a warranty?
Absolutely. The Halo LT4069FS1EWHR is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Halo LT4069FS1EWHR?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Halo LT4069FS1EWHR from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!