You may also like
HES 5000/5200 Series Accessories - Standard and Specialty Faceplates
Model: HES-5000-Faceplates
HES 5000/5200 FACEPLATES
The 5000 series is a compact, high performance electric strike designed for low profile openings where there is limited space behind the jamb. Its strength is derived from a...
HES
Starting at
$27.25
$15.74
Hager 5919 5200 Series Pinion Cap for Door Closer Applications
Model: HAG-5919
Hager 5919 5200 Series Pinion Cap for Door Closer ApplicationsProfessional Door Closer Component SolutionThe Hager 5919 Pinion Cap is specifically designed for 5200 Series door closers, providing...
Hager
Starting at
$2.26
$1.32
HES 5200-500 Filler Block for 5200 Series for Retro-Fit Applications with 11/16" Deeper Jamb Cut Out
Manufacturer Resources
HES 5200 Series Installation Instructions
Product Specs
- Commercial/Residential:
- Commercial
- Grade:
- Grade 1
- Series:
- Electric Strike Accessories
- Electronic:
- Yes
- Product Group:
- Electronic Access Controls
- Product Subgroup:
- Electric Strikes Parts and Accessories
- Product Type:
- Parts and Accessories
- Subcategory:
- Electric Strike Parts and Accessories
- Parts and Accessories Type:
- Installation Accessories
- Product Attribute:
- Parts and Accessories
- Product Category:
- Parts and Accessories
- Department:
- Door Hardware
HES 5200-500 – Frequently Asked Questions
1) What is the HES 5200-500 filler block used for?
The 5200-500 is a filler block for HES 5200 Series electric strikes, made for retro-fit work where the existing jamb cut out is 11/16 inch deeper than the 5200 needs. It fills that extra depth so the strike sits correctly in the prepared opening instead of forcing you to patch or re-prep the frame.
2) Will the HES 5200-500 filler block work with other HES strike series?
It is made for the 5200 Series. The 5200-500 is specified as a 5200 Series filler block, so treat it as a 5200-only part and match the filler to whatever strike series you are actually installing.
3) Is the HES 5200-500 filler block rated for commercial door openings?
Grade 1 and listed for commercial use, so it suits the traffic on institutional, multi-family and commercial openings rather than residential-only work.
4) Can a Securitron SAM surface mount kit accessory be used in place of the HES 5200-500 filler block?
No. The Securitron SAM Surface Mount Kit Accessories are mounting parts for the SAM device, so they hang hardware on the face of the frame or door rather than filling a prep. The HES 5200-500 is an installation accessory that fills an 11/16 inch deeper jamb cut out on a retro-fit so a 5200 Series electric strike sits correctly in an existing pocket. If the frame pocket is too deep for the strike, the SAM parts do nothing for that condition and the 5200-500 is the part that addresses it.
5) The frame prep for a 5200 strike is oversized and someone suggested a Securitron SWB wood bracket - is that the right fix?
Those solve different problems. The Securitron SWB is a SAM wood bracket accessory, intended to give a device a wood mounting surface. The HES 5200-500 filler block is made for retro-fit openings where the jamb cut out is 11/16 inch deeper than the 5200 Series strike needs, and it takes up that depth in the pocket itself. For a metal or wood jamb whose existing cutout is too deep for the 5200, the filler block is the part matched to that dimension.
6) Does the HES 5200-500 filler block have any wiring or electrical function?
No wiring involved. The 5200-500 is an installation accessory that takes up depth in the jamb cut out; all the electrical work stays in the 5200 Series strike itself.
7) Is a Cal-Royal 8641-SM surface mount box an alternative to an HES filler block for an electric strike install?
They are not interchangeable. The Cal-Royal 8641-SM is a single gang surface mount box in the 8600 Series, used to house a device on the surface of a wall or frame. The HES 5200-500 is a commercial installation accessory that shims the depth of an existing jamb cut out that runs 11/16 inch deeper than a 5200 Series strike requires. Choose the 5200-500 when the strike is going back into a prep that is already cut, and the 8641-SM when a device needs its own surface enclosure.
How fast can I get the HES 5200-500 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the HES 5200-500 come with a warranty?
Absolutely. The HES 5200-500 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the HES 5200-500?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the HES 5200-500 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.