HID R15/RP15 iClass/multiCLASS...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$114.83
$91.60
HID R15/RP15 iClass/multiCLASS, SE Reader Bluetooth OSDP Upgrade Kit, 1 Bluetooth OSDP Module, 1 Metallic Backplate Sticker

HID R15/RP15 iClass/multiCLASS, SE Reader Bluetooth OSDP Upgrade Kit, 1 Bluetooth OSDP Module, 1 Metallic Backplate Sticker

(No reviews yet) Write a Review

Model: BLEOSDP-UPG-A-910

In Stock (leaves warehouse same day if ordered before 3pm ET)

$114.83
$91.60
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Upgrade existing iCLASS SE and multiCLASS SE readers to support HID Mobile Access, more secure end-to-end communication through the open secure device protocol (OSDP) standard or ability to maintain configuration and firmware updates through the HID reader manager mobile app. The easy to install Bluetooth & OSDP upgrade kit consists of a plug-in module and adhesive reflector back plate sticker to optimize performance. Each kit is suitable for upgrading one reader.

Features:

  • More Dynamic – Upgrade kit supports HID Mobile Access now or in the future.
  • More Secure – Open supervised device protocol (OSDP) module enables secure communications between reader and controller.
  • More Convenient – Permits in-field reader configuration and updates when used with the HID reader manager mobile application.

Specifications:

  • System Requirements: Compatible iOS or Android smartphone with HID Reader Manager mobile app
  • Reader Hardware Compatibility: iCLASS SE and multiCLASS SE Revision E part numbers starting with 900, 910, 920, 921 (excluding pivCLASS and multiCLASS SE with Indala Prox)
  • Reader Firmware Compatibility: R7SP3, R7SP8, R8.4.x, R8.5.x, R8.6.x

Manufacturer Resources

Product Specs

Product Group:
Electronic Access Controls
Product Subgroup:
Readers, Keypads and Credentials
Product Type:
Access Control Readers
Subcategory:
Credential Readers
Commercial/Residential:
Commercial
Electronic:
Yes
Product Category:
Electronic Access Controls
Department:
Door Hardware

HID BLEOSDP-UPG-A-910 – Frequently Asked Questions

1) Will the HID Bluetooth OSDP upgrade kit work on my existing iCLASS SE readers?
It fits iCLASS SE and multiCLASS SE Revision E readers whose part numbers start with 900, 910, 920 or 921. Two exclusions matter before you order: pivCLASS readers are not supported, and neither is multiCLASS SE with Indala Prox. Check the part number printed on the reader against that list, because a Revision E prefix outside 900/910/920/921 is not covered.
2) What firmware does a reader need before the HID Bluetooth OSDP module can be installed?
The reader has to be running R7SP3, R7SP8, R8.4.x, R8.5.x or R8.6.x. Firmware outside those releases is not covered by the upgrade kit, so pull the firmware version off each reader before you buy a kit per door.
3) How many readers does one HID BLEOSDP-UPG-A-910 kit cover?
One reader per kit. Each kit contains a single plug-in Bluetooth OSDP module and one adhesive metallic reflector backplate sticker, so a 40 door site needs 40 kits. Order the count by reader, not by controller or by panel.
4) Do I have to replace my HID readers to get mobile credentials and OSDP, or can I upgrade them?
If the readers are iCLASS SE or multiCLASS SE Revision E in the supported part number and firmware ranges, the upgrade kit is the alternative to replacing hardware. The plug-in module adds HID Mobile Access support and OSDP communication between reader and controller on the reader you already have mounted. Where readers fall outside those ranges (pivCLASS, multiCLASS SE with Indala Prox, older revisions), the kit will not help and a new reader is the path.
5) Is the SDC IPRW proximity reader a substitute for the HID BLEOSDP-UPG-A-910 Bluetooth OSDP upgrade kit?
No, they solve different problems. The BLEOSDP-UPG-A-910 is a plug-in module and adhesive reflector back plate sticker that upgrades an existing iCLASS SE or multiCLASS SE reader in place, adding HID Mobile Access, OSDP communication to the controller, and configuration through the HID Reader Manager mobile app. The SDC IPRW Series is a Wiegand proximity reader with 125KHz HID compatibility, meaning it is a complete reader head that mounts at the opening and communicates to the panel over Wiegand. If the SE reader is already on the door and staying, the upgrade kit is the part that changes what it can do; the IPRW would replace the reader entirely and put the opening back on Wiegand rather than OSDP.
6) What should I install if the existing reader at the opening cannot take the HID Bluetooth OSDP upgrade module?
Where the reader in place is not an iCLASS SE or multiCLASS SE Revision E unit with a part number starting 900, 910, 920 or 921 on firmware R7SP3, R7SP8, R8.4.x, R8.5.x or R8.6.x, the BLEOSDP-UPG-A-910 module has nothing to plug into and the opening needs a reader rather than a kit. The SDC IPRW Series is a Wiegand proximity reader with 125KHz HID compatibility, so it reads existing 125KHz HID prox credentials and wires to the panel over Wiegand. That keeps the cardholder population on the credentials they already carry, with the reader supplying the head end instead of an upgrade to one.
7) Do I need anything besides the kit to commission the HID Bluetooth OSDP module?
A compatible iOS or Android smartphone running the HID Reader Manager mobile app. That app is what lets you configure the reader and push firmware updates in the field once the module is in, so budget a phone with the app installed for whoever is doing the install.
8) Does adding the HID OSDP module mean I have to move to mobile credentials right away?
No. The kit supports HID Mobile Access now or later, so you can install it for the OSDP wiring security and the field configuration ability, and turn on mobile credentials whenever the access control program is ready for them.
9) Is this HID upgrade kit an option if my readers are Wiegand and I want to move off it?
The kit adds OSDP communication between the reader and controller, but only on supported iCLASS SE and multiCLASS SE Revision E readers. If your openings are running older Wiegand proximity readers instead, the kit does not apply to them; a Wiegand reader such as the SDC IPRW Series, which reads 125KHz HID compatible credentials, is a separate device rather than something this module upgrades.
10) If I want OSDP wiring between the reader and the controller, does a 125KHz proximity reader get me there?
Not on its own. The BLEOSDP-UPG-A-910 kit exists specifically to add an Open Supervised Device Protocol module so communication between the reader and the controller is secured end to end, and each kit covers one reader. The SDC IPRW Series is described as a Wiegand proximity reader, so its output to the panel is Wiegand. On a retrofit where the SE readers are staying and the requirement on the drawing is OSDP to the controller, the upgrade module is what changes the protocol at the existing readers; a Wiegand prox reader changes the credential reading, not the panel-side protocol.
11) What is the metallic backplate sticker in the HID Bluetooth OSDP kit for, and can I skip it?
The adhesive reflector back plate sticker goes on to optimize the module's performance, so it is part of the install, not packaging. Install it with the module rather than treating it as spare.
How fast can I get the HID BLEOSDP-UPG-A-910 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the HID BLEOSDP-UPG-A-910 come with a warranty?
Absolutely. The HID BLEOSDP-UPG-A-910 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the HID BLEOSDP-UPG-A-910?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the HID BLEOSDP-UPG-A-910 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!