HID R40/RP40 iClass SE, multiC...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$114.83
$91.60
HID R40/RP40 iClass SE, multiCLASS SE, Bluetooth and OSDP Upgrade Kit with Metallic Backplate Sticker

HID R40/RP40 iClass SE, multiCLASS SE, Bluetooth and OSDP Upgrade Kit with Metallic Backplate Sticker

(No reviews yet) Write a Review

Model: BLEOSDP-UPG-A-920

In Stock (leaves warehouse same day if ordered before 3pm ET)

$114.83
$91.60
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

HID Global Corporation

Upgrade existing iCLASS SE and multiCLASS SE readers to support HID Mobile Access, more secure end-to-end communication through the open secure device protocol (OSDP) standard or ability to maintain configuration and firmware updates through the HID reader manager mobile app. The easy to install Bluetooth & OSDP upgrade kit consists of a plug-in module and adhesive reflector back plate sticker to optimize performance. Each kit is suitable for upgrading one reader.

Features:

  • More Dynamic – Upgrade kit supports HID Mobile Access now or in the future.
  • More Secure – Open supervised device protocol (OSDP) module enables secure communications between reader and controller.
  • More Convenient – Permits in-field reader configuration and updates when used with the HID reader manager mobile application.

Specifications:

  • System Requirements: Compatible iOS or Android smartphone with HID Reader Manager mobile app
  • Reader Hardware Compatibility: iCLASS SE and multiCLASS SE Revision E part numbers starting with 900, 910, 920, 921 (excluding pivCLASS and multiCLASS SE with Indala Prox)
  • Reader Firmware Compatibility: R7SP3, R7SP8, R8.4.x, R8.5.x, R8.6.x

Manufacturer Resources

Product Specs

Product Group:
Electronic Access Controls
Product Subgroup:
Readers, Keypads and Credentials
Product Type:
Access Control Readers
Subcategory:
Credential Readers
Commercial/Residential:
Commercial
Electronic:
Yes
Product Category:
Electronic Access Controls
Department:
Door Hardware

HID BLEOSDP-UPG-A-920 – Frequently Asked Questions

1) Which HID readers can the BLEOSDP-UPG-A-920 Bluetooth and OSDP upgrade kit actually be installed in?
The kit fits iCLASS SE and multiCLASS SE readers, Revision E, with part numbers starting 900, 910, 920 or 921. Two families are excluded outright: pivCLASS readers and multiCLASS SE readers with Indala Prox. Check the reader's printed part number prefix and revision letter before you order, because a Rev E prefix is the whole compatibility test here.
2) Does my HID reader need a particular firmware version before the Bluetooth/OSDP module will work?
Yes. The reader has to be running R7SP3, R7SP8, R8.4.x, R8.5.x or R8.6.x firmware. If the reader is on something older, the module is not the right starting point.
3) How many readers will one HID BLEOSDP upgrade kit cover?
One. Each kit contains a single plug-in module and one adhesive reflector back plate sticker, and HID states each kit upgrades one reader. If you're converting a building of R40s to OSDP, order one kit per reader.
4) Will this kit let me move my HID readers from Wiegand to OSDP without replacing them?
That's the point of it. The module adds Open Supervised Device Protocol communication between reader and controller, so an existing iCLASS SE or multiCLASS SE reader can talk OSDP instead of being swapped out. Your panel or controller still has to support OSDP on its end, and the reader wiring run has to be landed accordingly.
5) Can I add mobile phone credentials to existing HID card readers without buying new readers?
Yes, if the readers qualify. The upgrade kit adds support for HID Mobile Access to eligible iCLASS SE and multiCLASS SE Rev E readers, so cardholders can present a phone instead of a card. You can install it now and turn mobile on later, the kit supports Mobile Access now or in the future.
6) Can the BLEOSDP-UPG-A-920 kit be used to add Bluetooth to an SDC IPRW proximity reader?
No. The BLEOSDP-UPG-A-920 Bluetooth and OSDP upgrade kit is a plug-in module and adhesive reflector back plate sticker that fits HID iCLASS SE and multiCLASS SE Revision E readers with part numbers starting 900, 910, 920 or 921, excluding pivCLASS and multiCLASS SE with Indala Prox, and it requires reader firmware R7SP3, R7SP8, R8.4.x, R8.5.x or R8.6.x. The SDC IPRW Series is a Wiegand proximity reader with 125KHz HID credential compatibility - it is a complete reader, not an SE platform reader, so there is no module slot for this kit. Each kit upgrades one reader.
7) My existing reader is not an iCLASS SE - what do I install instead of the BLEOSDP-UPG-A-920 kit?
The BLEOSDP-UPG-A-920 kit only upgrades HID iCLASS SE and multiCLASS SE Revision E readers, so on an opening with an older or non-SE reader you replace the reader rather than upgrade it. The SDC IPRW Series is a Wiegand proximity reader that reads 125KHz HID credentials, which suits a panel wired for Wiegand output. Note the difference in what you get: the HID kit adds HID Mobile Access support and OSDP communication between reader and controller, plus in-field configuration through the HID Reader Manager mobile app, while the IPRW is a Wiegand-output prox reader.
8) What's in the box with the HID Bluetooth and OSDP upgrade kit?
A plug-in module that goes inside the reader and an adhesive metallic reflector backplate sticker that goes behind it to optimize performance. Both pieces matter, the sticker isn't cosmetic.
9) Do I need anything besides the kit to configure the reader after the upgrade?
A compatible iOS or Android smartphone with the HID Reader Manager mobile app. That app is what does the in-field configuration and firmware updates once the module is in, so plan on having a phone enrolled for the technician doing the install.
10) I have older 125 kHz proximity readers, not iCLASS SE. Can this kit upgrade them?
No. The kit only works on iCLASS SE and multiCLASS SE Rev E readers, so a straight 125 kHz prox reader isn't upgradeable with it. For an opening that just needs a working Wiegand prox reader rather than an upgrade path, the SDC IPRW Series Wiegand proximity reader with 125 kHz HID compatibility is the type of product to look at instead.
11) Is the HID BLEOSDP upgrade kit suitable for commercial and institutional access control installs?
It's a commercial-duty electronic access control part, intended for card reader fleets in offices, healthcare, education and multi-family rather than residential use. Because it upgrades readers in place, it's a common choice for facilities standardizing a whole site on OSDP and mobile credentials without a full reader replacement.
How fast can I get the HID BLEOSDP-UPG-A-920 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the HID BLEOSDP-UPG-A-920 come with a warranty?
Absolutely. The HID BLEOSDP-UPG-A-920 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the HID BLEOSDP-UPG-A-920?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the HID BLEOSDP-UPG-A-920 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!