You may also like
INS NYL RING 2/0 5/16 WITH 90 DEG
Manufacturer Resources
Product Specs
- Country Of Origin:
- Mexico (MX)
- Product Subgroup:
- General Terminals
- Product Type:
- Nylon Insulated Ring Terminal - 90 Degree Bend
- Wire Size:
- 2/0 AWG
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Blue
- Product Material:
- Nylon
Sta-Kon RJ727U – Frequently Asked Questions
1) What wire size does the Sta-Kon RJ727U ring terminal take?
The RJ727U is sized for 2/0 AWG conductor. It is a one-size barrel, so it should not be used on smaller cable without the correct step-down terminal for that gauge.
2) What stud size does the Sta-Kon RJ727U ring fit?
The ring tongue is drilled for a 5/16 inch stud or bolt, so it lands on a 5/16 inch terminal post, breaker lug stud or bus bar bolt.
3) Why would I use a 90 degree ring terminal instead of a straight one?
The RJ727U has the tongue bent 90 degrees to the barrel, which lets 2/0 cable run parallel to a panel wall or bus and turn onto the stud without forcing a bend radius into the conductor itself. In a tight enclosure or a crowded gutter, that right angle is what keeps the cable from bowing out against the cover. If your cable approaches the stud straight on, a flag or straight ring is the better pick.
4) Is the Sta-Kon RJ727U insulated, and what is the insulation made of?
Yes, the barrel carries a nylon insulating sleeve in blue. Nylon holds up better to abrasion and cold flow than vinyl, which matters on heavy 2/0 cable that gets pulled and dressed in a panel.
5) Can I crimp the RJ727U with a hand tool?
No. A 2/0 copper barrel this size needs a hydraulic or heavy mechanical crimper with the matching die for 2/0; standard hand crimpers for insulated terminals top out far below this gauge. Order the terminal and the correct die set together.
6) Does the blue color on this Sta-Kon terminal mean a particular wire gauge?
Not in the usual small-terminal color code. Blue on the common red/blue/yellow scale means 16-14 AWG, but that scheme stops at 10 AWG. On the RJ727U the blue is simply the nylon sleeve color; the gauge is 2/0 AWG, so go by the printed size, not the color.
7) Where is the Sta-Kon RJ727U made, and what part number do I order by?
Order it as Sta-Kon RJ727U. It is manufactured in Mexico.
How fast can I get the Sta-Kon RJ727U delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon RJ727U come with a warranty?
Absolutely. The Sta-Kon RJ727U is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon RJ727U?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon RJ727U from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.