You may also like
NON-INS TUB RING 1AN2/0 5/16 90 DEG
Manufacturer Resources
Product Specs
- Country Of Origin:
- Mexico (MX)
- Product Subgroup:
- General Terminals
- Product Type:
- Non-Insulated Ring Terminal - 90 Degree Bend
- Voltage Rating:
- 600 V
- Wire Size:
- 1AN-1/0
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Material:
- Copper
Sta-Kon H972U – Frequently Asked Questions
1) What wire size does the H972U lug take?
Sized for 1 AWG through 1/0 conductor. It is a tubular barrel lug, so the stranded conductor seats fully in the barrel before crimping.
2) Is this ring terminal insulated, and does it need heat shrink or tape over it?
It is a non-insulated terminal, bare copper with no sleeve. Anywhere the connection is exposed or close to other live parts, you add your own insulation over the barrel, usually adhesive heat shrink. In an enclosure or on a busbar with proper clearances, lugs like this are routinely left bare.
3) What voltage can the H972U terminal be used at?
Rated 600 V, which covers standard commercial and industrial branch and feeder work, panelboards, motor terminations, and control gear. It is not a medium-voltage lug.
4) Why would I pick a 90 degree ring lug instead of a straight one?
The right-angle tongue is for tight terminations where a straight lug would force a sharp bend in a 1 AWG or 1/0 cable right at the barrel. With the bend built into the lug, the cable enters flat along the panel and the ring still lands square on a 5/16 inch stud. If you have room to sweep the conductor in, a straight non-insulated ring is simpler.
5) Can I use this copper lug on aluminum conductor?
No. The H972U is a copper terminal and should be used on copper conductor only. Aluminum feeders need an AL9CU rated or aluminum-bodied lug with the appropriate inhibitor compound.
6) Is the H972U crimped or set-screw?
It is a crimp lug, not a mechanical set-screw lug. The tubular copper barrel is compressed onto the conductor with a hydraulic or heavy mechanical crimp tool using the die matched to the lug and the 1 AWG to 1/0 conductor. Budget for the tool if you do not already run one at this size.
7) Where is the Sta-Kon H972U made, and what is the manufacturer part number for ordering?
Order it as Sta-Kon H972U. Country of origin is Mexico, which matters if you are filing country-of-origin documentation on a government or institutional project.
How fast can I get the Sta-Kon H972U delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon H972U come with a warranty?
Absolutely. The Sta-Kon H972U is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon H972U?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon H972U from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.