You may also like
NON-INS TUB RING 1AN-1/0 5/16
Manufacturer Resources
Product Specs
- Country Of Origin:
- Mexico (MX)
- Product Subgroup:
- General Terminals
- Product Type:
- Non-Insulated Ring Terminal
- Standards:
- UL E9809
- Voltage Rating:
- 600 V
- Wire Size:
- 1AN-1/0
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Metallic
- Product Material:
- Copper
Sta-Kon H972 – Frequently Asked Questions
1) What wire sizes does the Sta-Kon H972 ring terminal accept?
The H972 is sized for 1 AWG through 1/0 wire. It's a single-barrel lug, so it won't crimp down reliably on smaller conductors like 4 or 6 AWG - step to a terminal sized for that range instead of over-crimping this one.
2) Is the H972 terminal copper or aluminum, and can I put it on aluminum conductors?
The barrel is copper, so it is intended for copper conductors. Aluminum feeders need a lug rated AL or AL/CU - putting copper-only hardware on aluminum wire sets up a dissimilar-metal connection that an inspector will flag.
3) Is the Sta-Kon H972 insulated, and do I need to add insulation after crimping?
It's a non-insulated tubular ring terminal - bare copper barrel with no sleeve. In most installations you finish it with heat shrink or tape over the barrel for dielectric cover and strain relief, or leave it bare inside an enclosure where the termination is already protected.
4) Can I use the H972 terminal on a 480V motor feeder?
Yes. The H972 carries a 600 V rating, which covers 120/208, 277/480, and 600 V class circuits found in commercial panels, motor connections, and switchgear.
5) Do I need a special crimper for the Sta-Kon H972 tubular ring terminal?
At 1 AWG to 1/0 this is a heavy barrel, past the range of hand-squeeze crimpers used for 22-10 AWG insulated terminals. You'll need a hydraulic or ratcheting lug crimper with dies in the 1 to 1/0 range. A proper die crimp is what gives the connection its pull-out strength, so don't substitute a bolt cutter style tool or a hammer die unless it's matched to the barrel.
6) What is the manufacturer part number and country of origin for this Sta-Kon ring terminal?
Order it as Sta-Kon H972. It's manufactured in Mexico, which matters if you're tracking origin for a government or federally funded procurement file.
How fast can I get the Sta-Kon H972 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon H972 come with a warranty?
Absolutely. The Sta-Kon H972 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon H972?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon H972 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.