For Large Item, additional shipping charges may apply.
Large Item is considered any product greater than 92".
|
- Patented center loaded, interlocking bearing design;
- XY (lateral and vertical) adjustability while hanging the door;
- Articulating cover design eliminates pinch point between center channel cover and door and frame leaf covers;
- Non-handed for custom cut lengths;
- 1/32" door inset;
- 48" Maximum door width;
- Beveled or square edge doors;
- For doors weighing up to 550 pounds;
- For lead-lined application consult factory for engineering specials.
- Standard length: 83", 85", 95", 119";
Standard mounting hardware:
- 1/4-20 x 3/4" Phillips head machine screws and pan head through bolts.
- 12-24 x 3/4" Steel self drilling/self tapping hex head screw.
- 12-24 x 3/4" Steel self drilling/self tapping phillips head screw.
- SECHM - Security screws - hollow metal door and frame;
- SECWDHM - Security screws - 1/2 wood, 1/2 hollow metal;
- SECWDWD - Security screws - wood door and frame;
- TEKWD - 1/2 Self drill, self tap 1/2 wood;
- WD - Wood door and frame.
- All hinges are certified to ANSI 156.26, Grade 1 and UL10C (90 minute)
- Limited lifetime warranty
- Offerings support various applications, including swing clear, wide throw and electrified
- Designed to keep the door in constant alignment and eliminate door sag
- A cover channel holds together two separate gear sections, providing a visually pleasing solution
- Eliminates space between the hinges helping to prevent fingers from being pinched
- Available in full mortise, full surface, and half surface hinges
- Available with factory modified cutouts to accommodate most electrical frame-to-door requirements; special templates are required
- Hinges can be cut to length during installation
- Unique mounting pattern allows to cut up to 6" from the bottom while still having double row fasteners
- Rounded gear design for extended life and smooth operation
- Patented, center-loaded, interlocking bearing design that helps better the opening and closing of the door over time
- XY mounting slot adjustability on all full and half surface models to help with installation
- Frame guidance lip is further extended for retrofit applications to cover existing heavy-weight architectural hinge preps
- Improved aesthetics with a curved, articulating cover design that eliminates pinch points
- Half surface: hinge is mounted on the door stile face and inside of the frame side jamb; only one hinge side and gear cover are visible when the door is closed. Offering includes the following models: 045XY, 046XY, 053XY and 054XY.
- Full mortise: hinge is mounted on the side of the door stile and inside of the frame side jamb; only the gear cover is visible with the door is closed. Offering includes the following models: 026XY, 027XY, 040XY, 041XY, 112XY, 112HD, 114XY, 224HD, and 224XY.
- Full surface, center pivot: hinge is mounted on the door stile face and the frame side jamb face; the entire hinge is visible when the door is closed. The geared section is located where the door stile and frame side jamb meet. Offering includes the following model: 157XY.
- Full surface, swing clear: hinge is mounted on the door stile face and the frame side jamb face; the entire hinge is visible when the door is closed; the geared section is located over the side jamb. Offering includes the following model: 210XY.
- Available in three BHMA standard finishes:
- Clear anodized (628)
- Dark bronze (710)
- Black anodized (711)
- Custom finishes are also available; consult factory
- Electric power transfer prep (EPT)
- Through wire panel (TWP)
- Hospital tip
- Security fasteners – pin-in-socket
- Wood fasteners
- Thread-forming screws (pilot hole is required)