You may also like
Ives PR-9266 Straight Long Ladder Door Pull Pair 1-1/4" Diameter Back-to-Back Mount
Model: IVE-PR-9266
Ives PR-9266 Straight Long Ladder Door Pull Pair 1-1/4" Diameter Back-to-Back MountProfessional-Grade Long Door Pull Solution for Commercial ApplicationsThe Ives PR-9266 straight long door pull pair...
Ives
Starting at
$785.00
$574.61
Ives 8103HD Back to Back Door Pulls with 10" CTC and 1" Diameter in Satin Stainless Steel
Professional Commercial Door Pull Hardware
The Ives 8103HD back to back door pulls feature a robust 1" diameter construction with 10" center-to-center spacing and 1-1/2" clearance from the door surface. Designed for commercial applications, these door pulls provide reliable operation with Type N mounting configuration in an attractive satin stainless steel finish.
Professional Features & Benefits
- Optimal Sizing: 10" center-to-center spacing with 1" diameter provides comfortable grip and professional appearance for commercial door applications.
- Proper Clearance: 1-1/2" clearance from door surface ensures adequate hand space for comfortable operation and ADA compliance considerations.
- Back to Back Design: Paired configuration provides consistent operation from both sides of the door for balanced functionality.
- Commercial-Grade Construction: Heavy-duty design engineered for high-traffic commercial environments requiring dependable performance.
- Type N Mounting: Standard mounting configuration allows for straightforward installation on compatible door preparations.
- Durable Finish: Satin stainless steel finish provides corrosion resistance and maintains appearance in demanding commercial settings.
Technical Specifications
- CTC: 10"
- Clearance: 1-1/2"
- Commercial/Residential: Commercial
- Department: Door Hardware
- Installation Category: N
- Product Category: Door Trim and Accessories
- Product Diameter: 1"
- Product Group: Door Trim and Accessories
- Product Subgroup: Door Pulls, Push and Pull Plates
- Product Type: Door Pulls
- Subcategory: Pulls and Push Plates
Installation & Operation
- Review manufacturer specifications and verify door preparation requirements including door thickness, stile width, and handing as applicable to this product.
- Use manufacturer-provided templates to mark mounting hole locations accurately on door and/or frame surfaces.
- Prepare door and frame by drilling required holes and routing as specified in manufacturer instructions.
- Install all mounting hardware and secure the device to door and frame per manufacturer torque specifications.
- Adjust operational components for proper alignment, latching, and smooth operation throughout the full range of motion.
- Test device operation to verify proper function and make final adjustments as needed. Refer to manufacturer documentation for complete installation details and troubleshooting.
Professional Applications
- Commercial Office Buildings
- Educational Facilities
- Healthcare Institutions
- Retail Establishments
- Industrial and Warehouse Facilities
- Multi-Tenant Residential Properties
- Government and Municipal Buildings
Why Choose Ives Quality?
Ives door pull products deliver professional-grade reliability with heavy-duty construction designed for demanding commercial applications. The 1" diameter and Type N mounting configuration provide dependable performance where consistent operation is essential. Engineered for high-traffic environments where durable door hardware performance is critical.
Manufacturer Resources
Ives Full Line Catalog
Product Specs
- Commercial/Residential:
- Commercial
- Product Group:
- Door Trim and Accessories
- Product Subgroup:
- Door Pulls, Push and Pull Plates
- Product Type:
- Door Pulls
- Subcategory:
- Pulls and Push Plates
- CTC:
- 10"
- Clearance:
- 1-1/2"
- Product Diameter:
- 1"
- Installation Category:
- N
- Product Category:
- Door Trim and Accessories
- Department:
- Door Hardware
Ives PR8103HD-0 US32D N – Frequently Asked Questions
1) What door thickness will the Ives 8103HD back-to-back pulls mount on?
The 8103HD ships as a back-to-back pair, meaning the two pulls through-bolt to each other rather than anchoring into the door, so the bolt length is what sets the thickness it works on. What the spec does pin down is the standoff: 1-1/2 inches of clearance between the grip and the door face on each side, and a 1 inch grip diameter. On a standard 1-3/4 inch commercial door that puts the pulls in a normal back-to-back arrangement. If you are hanging pulls on a thin panel instead, the Deltana OHP620 back-to-back set is rated for 1-1/8 to 1-3/8 inch doors.
2) Is 10 inch center-to-center on the Ives 8103HD the hole spacing or the overall pull length?
10 inches is the center-to-center dimension, the distance between the two mounting hole centers. Overall grip length runs longer than that because the pull turns at each end to reach the 1-1/2 inch standoff. Drill your template at 10 inches on center. If you are matching an existing prep, that 10 inch CTC is the number that has to line up, not the visible length of the old pull.
3) Can I use the Ives 8103HD on a glass door or an aluminum storefront stile?
The 8103HD is a through-bolted back-to-back pull with 10 inch hole centers, so it needs a door face that can be drilled at those two points and enough stile behind them. On an aluminum storefront door that means the two holes have to land within the stile, not on the glass line, so measure your stile before ordering. On a full glass door with no stile, a through-bolted pair like this will not mount without a factory prep in the glass.
4) Is 1-1/2 inch clearance on a door pull enough hand room for a gloved hand or ADA use?
1-1/2 inches is the standoff between the 1 inch grip and the door face on the 8103HD, which is the standard commercial clearance and leaves room for a full gloved grip. Combined with the 1 inch round grip it gives a graspable handle that does not require tight pinching or twisting to operate. If your project is being reviewed against a specific accessibility standard, have the spec writer confirm the requirement against those two numbers.
5) What does US32D satin stainless steel mean, and will it match the other hardware in my building?
US32D is satin (brushed) stainless, the standard commercial finish you see on push plates, kick plates, and exit device trim across office, school, and healthcare work. It is the most common finish specified in commercial buildings, so a set of 8103HD pulls will read the same as existing 630 satin stainless hardware on your other openings. If the rest of your doors are polished brass or oil-rubbed bronze, this is not the match.
6) How do back-to-back pulls compare with an offset pull for a high-traffic commercial entrance?
The 8103HD is a straight round pull, 1 inch diameter, grabbed square on from either side, which is what you want on a door that gets pulled hundreds of times a day from both directions. An offset pull like the ABH AB3310 or the Deltana SSPOBB24 angles the grip away from the door, which some designers prefer on tall entrance doors for the look and for a slightly different hand position. Function is the same; the difference is grip geometry and appearance, so pick the one that matches the rest of the entrance.
7) Do I need to order mounting hardware separately for the Ives 8103HD pulls?
Type N mounting is the configuration this pull is built for, and as a back-to-back set the fasteners run through the door to join the two pulls. What you do need to confirm before install is that the door is drilled at the 10 inch centers and that the through-bolt length suits your door thickness. Ives supplies templates for marking the hole locations; use them rather than measuring off the old pull.
8) Will the 8103HD hold up on a restroom or a high-abuse corridor door?
Solid 1 inch round grip, 1-1/2 inch standoff, through-bolted both sides, and a satin stainless finish that shrugs off cleaning chemicals and fingerprints, which is why this configuration is standard in schools and hospitals. Through-bolting matters most here: nothing is threaded into the door skin to work loose. If the door is specifically a restroom exit where people want to pull with a forearm or a paper towel, the Trimco 1035 Ultimate Restroom Pull is the purpose-built alternative.
9) Which pull has a textured grip instead of the smooth round bar on the Ives 8103HD?
The Ives 8103HD uses a smooth 1 inch diameter round grip in satin stainless steel. For a textured grip, the Sure-Loc Knurled Long Door Pull is knurled along its length and comes single-sided with thru-bolt mounting, or double-sided as a back to back arrangement matching how the 8103HD is used. Sure-Loc also lists the same long pull in a plain round profile and in a square profile, so the same family covers smooth and textured grips on the same doors.
How fast can I get the Ives PR8103HD-0 US32D N delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Ives PR8103HD-0 US32D N come with a warranty?
Absolutely. The Ives PR8103HD-0 US32D N is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Ives PR8103HD-0 US32D N?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Ives PR8103HD-0 US32D N from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.