Ives R435 Aluminum Riser for F...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$10.60
$5.02
IV_R435-R437_SL_square

Ives R435 Aluminum Riser for FS436 Dome Stop Carpet Conversion

(No reviews yet) Write a Review

Model: R43514

In Stock (leaves warehouse same day if ordered before 3pm ET)

$10.60
$5.02
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Ives R435 Aluminum Riser for FS436 Dome Stop Carpet Conversion

Professional Dome Stop Conversion Accessory

The Ives R435 Aluminum Riser is specifically designed for conversion of FS436 Dome stop to carpet installation applications. This aluminum construction riser component enables proper dome stop function on carpeted surfaces while maintaining the protective door stopping capability. The riser comes packed with fasteners for heavy duty masonry and wood applications, ensuring secure installation across various substrate types.

Professional Features & Benefits

  • Carpet Installation Conversion: Specifically designed for conversion of FS436 Dome stop to carpet installation, enabling proper function on carpeted surfaces.
  • Heavy-Duty Fastener Kit: Packed with fasteners for heavy duty masonry and wood applications for secure mounting across various substrates.
  • Aluminum Construction: Durable aluminum substrate provides long-lasting performance and corrosion resistance in commercial applications.
  • Door Protection Function: Prevents door, wall and frame damage by stopping the door from opening too far into walls or adjacent surfaces.
  • Non-Marring Design: Utilizes non-marring rubber components to protect the finish of walls, molding, and doors during contact.
  • ANSI/BHMA Compliance: Meets ANSI/BHMA 156.16 standards for professional door hardware applications.

Technical Specifications

  • Commercial/Residential: Commercial
  • Department: Door Hardware
  • Duty Level: Light Duty
  • Product Category: Door Trim and Accessories
  • Product Group: Door Trim and Accessories
  • Product Model: R435
  • Product Subgroup: Door Stops, Holders, Silencers & Bumpers
  • Product Substrate: Aluminum
  • Product Type: Door Stops - Floor
  • Subcategory: Stops

Installation & Operation

This riser component is designed for use with compatible FS436 Dome stop hardware. Refer to the parent device installation instructions and manufacturer documentation for proper integration. Ensure compatibility with existing hardware before installation.

Professional Applications

  • Commercial Office Buildings with Carpeted Areas
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings
  • Hospitality and Hotel Applications

Why Choose Ives Quality?

Ives door stop accessories deliver professional-grade reliability with aluminum construction and ANSI/BHMA 156.16 compliance for demanding commercial applications. The complete fastener kit ensures proper installation across masonry and wood substrates. Engineered for dependable door protection where carpet installation requires specialized riser components.

Manufacturer Resources

Ives Full Line Catalog

Product Specs

Product Group:
Door Trim and Accessories
Duty Level:
Light Duty
Subcategory:
Stops
Product Subgroup:
Door Stops, Holders, Silencers & Bumpers
Product Type:
Door Stops - Floor
Commercial/Residential:
Commercial
Product Model:
R435
Product Category:
Door Trim and Accessories
Product Substrate:
Aluminum
Department:
Door Hardware

Ives R43514 – Frequently Asked Questions

1) What is the Ives R435 riser actually for?
The R435 is an aluminum riser used to convert an Ives FS436 dome stop for carpet installation. It raises the dome stop off the subfloor so the stop still contacts the door properly once carpet and pad are in place. It is a mounting component, not a stop on its own, so you need the FS436 dome stop to go with it.
2) Which R435 riser height do I need for my carpet?
The riser comes in seven heights: 1/4, 3/8, 1/2, 5/8, 3/4, 7/8 and 1 inch. Pick the one that matches the finished thickness of the carpet and pad you are shooting through, so the dome stop sits at the same effective height it would on bare floor. On a thin commercial glue-down loop, the 1/4 or 3/8 inch is usually enough; over a plush pad, buyers go to 3/4 or 1 inch.
3) Do I need to buy separate anchors to mount the R435 riser into concrete?
No. The R435 ships packed with fasteners for heavy duty masonry and wood applications, so the same kit covers a concrete slab or a wood subfloor. What is not included is the FS436 dome stop itself.
4) Will the Ives R435 riser work with any floor stop, or only the FS436?
Only the FS436 dome stop. The R435 is built for that specific conversion, and there is nothing in its design that adapts a gooseneck stop or another brand's dome stop. If you are working with a different floor stop, look for the riser that manufacturer publishes for it rather than trying to make this one fit.
5) We are re-carpeting a whole floor and the existing Ives dome stops are already anchored. Do we have to replace the stops?
Not if they are FS436 dome stops. The R435 riser is the conversion piece: it goes under the existing stop to bring it back up to the new finished floor height, so you keep the stops you already have and re-anchor through the riser with the included masonry or wood fasteners. Order riser heights to match the new carpet and pad thickness, and note the heights run 1/4 inch through 1 inch in eighths.
6) We want the door to hold open, not just stop - is the R435 riser the wrong part for that?
Yes. The R435 raises an FS436 dome stop for carpet, and a dome stop stops the door rather than holding it. For hold-open, the Orca Hardware 22HD Series goose neck floor stop is listed with a door holder function, and the SOSS MDH is a magnetic door holder and stop measuring 3-5/16 by 1-3/4 inches and rated heavy duty. The R435 is a light duty item, so on a door that needs to be parked open through the day the holder is the part to specify.
7) Is the Ives R435 a door stop on its own, or does it need something else to work?
The R435 is an aluminum riser only - it raises an FS436 dome stop so the dome clears carpet, and it has no stopping surface of its own. If you need a complete floor stop rather than a height adapter, the Orca Hardware 23LP Series dome floor stop is a low rise dome stop with a gray tip, the Delaney Dome Door Stop is a dome stop, and the Emtek 2251 is a half dome door stop. Order the R435 only when an FS436 dome stop is already in hand or on the same order.
8) The carpet in this corridor is thicker than any R435 riser height - what floor stop reaches the door instead?
The R435 riser is offered in 1/4, 3/8, 1/2, 5/8, 3/4, 7/8 and 1 inch heights, so a dome stop can only be lifted so far above the floor. Where the pile or an undercut door puts the door bottom out of that range, a gooseneck floor stop stands up off the floor to meet the door: the Delaney Gooseneck Floor Door Stop, the Emtek 2253 Goose Style Door Stop, and the Orca Hardware 22HD Series goose neck floor stop with black tip are all gooseneck floor stops. The Orca 22HD is listed for 1-3/8 inch or 1-3/4 inch door thickness.
9) Should I use a riser under a dome stop or switch to a gooseneck stop on a carpeted opening?
Two different answers to the same problem. A dome stop on a riser keeps the stop at the floor, low profile, and out of the walking path, which is why it gets specified in corridors and classrooms. A gooseneck stop mounts to the floor but catches the door higher up on the face, so carpet height barely matters and you skip the riser entirely. ZenSupply carries gooseneck options like the Orca Hardware 22HD Series goose neck floor stop with black tip and the Emtek 2253 Goose Style Door Stop if you would rather solve it that way.
10) Is the R435 riser rated for commercial buildings or is it a residential part?
Commercial. Ives classes the R435 as a commercial, light duty item, and the description states it meets ANSI/BHMA 156.16 for door hardware trim and accessories. Light duty here refers to the stop assembly's traffic class, not the anchoring, which is why the fastener kit covers masonry.
11) Can a universal floor bumper be used in place of the FS436 and R435 riser combination on carpet?
A universal floor bumper is a complete stop, not a riser, so it replaces the whole assembly rather than substituting for the R435. The Deltana UFB4505 is a round universal floor door bumper at 1-1/2 inches in solid brass, the UFBS138 is the square version at 1-3/8 inches, and the Emtek 2254 floor door bumper measures 1-3/8 by 1-1/4 inches. Those are fixed heights, whereas the R435 lets a single FS436 dome stop be set at 1/4, 3/8, 1/2, 5/8, 3/4, 7/8 or 1 inch of rise to suit the floor covering.
12) What is the difference between adding an R435 riser and buying a taller floor bumper for a carpeted lobby?
The R435 is an aluminum riser that lifts an existing FS436 dome stop, so the visible hardware stays the Ives dome the rest of the building already uses. A taller bumper changes the look as well as the height: the Deltana UFBD3505 is a 3-1/2 inch round universal floor bumper in a decorative solid brass style, the Deltana UFBP4505 is a 1-5/8 inch round bumper with a pattern cap, and the Emtek 2257 is a 1-1/2 inch cylindrical floor bumper. Choose the riser to keep a carpeted area matching the hard-floor areas, and choose a bumper series when the finish and profile are being selected fresh.
13) Will an aluminum riser corrode if it sits under carpet in a wet area like a locker room entry?
The riser is aluminum, which the manufacturer calls out for corrosion resistance in commercial use. For a genuinely wet or frequently mopped opening, solid brass floor bumpers hold up better long term; ZenSupply carries brass units like the Deltana UFB4505 round universal floor door bumper and the Deltana UFBS138 square universal floor door bumper, though those are complete bumpers rather than risers for an existing dome stop.
14) What is the difference between ordering a riser for a dome stop and just buying a taller floor bumper?
A riser keeps the FS436 dome stop and its non-marring rubber contact surface in service and only changes the mounting height, so the door hits the same thing it always did and the opening stays consistent with the rest of the building. A taller bumper is a different part with its own profile and strike point. If you are starting fresh rather than converting, a one-piece unit like the Emtek 2251 half dome door stop or the Orca 23LP Series low rise dome floor stop is the simpler order.
15) Which floor stops mount into masonry, or does that decide it against the R435?
The R435 riser ships packed with fasteners for heavy duty masonry and wood applications, so a slab-on-grade corridor or a concrete-floored service area is within its intended mounting. Among the alternatives, the SOSS MDH is a magnetic door holder and stop rated heavy duty, which is the comparable to look at when the anchoring substrate is paired with a high-traffic opening; the R435 itself is a light duty part.
How fast can I get the Ives R43514 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Ives R43514 come with a warranty?
Absolutely. The Ives R43514 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Ives R43514?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Ives R43514 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!