You may also like
Kaba Ilco IP-22 Series Intermediate Pivot Set with 3/4" Offset for Aluminum Doors and Frames
Model: ILC-IP-22
Kaba Ilco IP-22 Series Intermediate Pivot Set with 3/4" Offset for Aluminum Doors and FramesThe Kaba Ilco IP-22 Series Intermediate Pivot Set is engineered for recessed door and flush face frame...
Kaba Ilco
Starting at
$32.81
Kaba Ilco IP-12 Series Intermediate Offset Pivot Set for Aluminum Doors and Frames, Non Handed
Model: ILC-IP-12
Kaba Ilco IP-12 Series Intermediate Offset Pivot Set for Aluminum Doors and Frames, Non HandedThe Kaba Ilco IP-12 Series Intermediate Offset Pivot Set is engineered for Aluminum Door applications...
Kaba Ilco
$37.79
Kaba Ilco IL-OP-12 Series Offset Pivot Hinge Set for Armalite and Trulite Style Aluminum Doors
Model: ILC-IL-OP-12
Kaba Ilco IL-OP-12 Series Offset Pivot Hinge Set for Armalite and Trulite Style Aluminum DoorsKaba Ilco IL-OP-12 Series offset pivot hinges are engineered for recessed door and flush face frame...
Kaba Ilco
Starting at
$29.41
Kaba Ilco IL-OP-19 Series Offset Pivot Set for Aldora Style Aluminum Doors
Model: ILC-IL-OP-19
Kaba Ilco IL-OP-19 Series Offset Pivot Set for Aldora Style Aluminum DoorsThe Kaba Ilco IL-OP-19 Series is an offset pivot set engineered for both recessed door and flush face frame aluminum doors...
Kaba Ilco
$38.25
Kaba Ilco IL-OP-18 Series Top Offset Pivot Set for Kawneer Aluminum Doors and Frames, 1/8" Recessed
Model: ILC-IL-OP-18
Kaba Ilco IL-OP-18 Series Top Offset Pivot Set for Kawneer Aluminum Doors and Frames, 1/8" RecessedThe Kaba Ilco IL-OP-18 Series Top Offset Pivot Set is engineered for Kawneer aluminum doors and...
Kaba Ilco
Starting at
$25.86
$24.51
Kaba Ilco IP-10 Series Intermediate Pivot Hinge Set for Aluminum Doors and Frames with 3/4 Inch Offset and Ball Bearing Pivot
Kaba Ilco IP-10 Series intermediate pivot hinges are engineered for recessed door and flush face frame aluminum doors and frames, replacing pivots from most major door manufacturers. These 1/8" (3.18 mm) recessed pivot sets feature a 3/4" (19.05 mm) offset and die cast aluminum construction, with a full race ball bearing incorporated into the bottom pivot portion so the weight of the door rests on the floor mounted pivot without sag. Built for standard duty commercial applications, the IP-10 Series is theft resistant, weatherproof, and designed for durable, long term performance on aluminum storefront doors.
Key Features
- Die Cast Aluminum Construction: Durable die cast aluminum body stands up to repeated use on commercial aluminum doors and frames.
- Full Race Ball Bearing: A full race ball bearing is incorporated into the bottom pivot portion so door weight rests on the floor mounted pivot, preventing sag.
- 3/4 Inch Offset: A 3/4" (19.05 mm) offset is designed to replace pivots from most major door manufacturers on aluminum doors and frames.
- 1/8 Inch Recessed Pivot Set: Suitable for both recessed door and flush face frame applications with a 1/8" (3.18 mm) recessed configuration.
- Vertical Adjustment: 1/8" (3.18 mm) of vertical adjustment allows the installer to fine tune door alignment after mounting.
- Theft Resistant and Weatherproof: Construction resists tampering and weather exposure for reliable exterior and interior door performance.
- Easy Service Access: The pivot set is easily replaceable from inside the door, simplifying maintenance and part replacement.
- Finish Options: Available in two standard finishes, with dark bronze and special order finishes available upon request. Sets include fasteners.
Technical Specifications
- Product Group: Door Hinges and Pivots
- Product Subgroup: Pivots and Pivot Sets
- Product Type: Pivots - Offset
- Commercial/Residential: Commercial
- Duty Level: Standard Duty
- Electronic: No
- Application: Standard Door
- Fire Rating: No
- Product Category: Door Hinges and Pivots
- Tags: kaba ilco pivot hinge, kaba ilco hinges, pivot door hinges, pivot hinges heavy duty
Typical Applications
- Commercial Office Buildings
- Educational Facilities
- Healthcare Institutions
- Retail Establishments
- Industrial and Warehouse Facilities
- Multi-Tenant Residential Properties
- Government and Municipal Buildings
Why Kaba Ilco IP-10?
Kaba Ilco IP-10 Series pivots deliver standard duty, professional grade performance with die cast aluminum construction and a full race ball bearing engineered to carry door weight without sag. Theft resistant and weatherproof, these pivot sets are built for dependable, long term use on commercial aluminum doors and frames.
Manufacturer Resources
Brass Cylinder Storefront Hardware & Replacement Hardware Catalog
Product Specs
- Product Group:
- Door Hinges and Pivots
- Series:
- IP-10 Series
- Product Subgroup:
- Pivots and Pivot Sets
- Product Type:
- Pivots - Offset
- Subcategory:
- Door Pivots
- Commercial/Residential:
- Commercial
- Duty Level:
- Standard Duty
- Electronic:
- No
- Pivot Type:
- Intermediate
- Mounting Method:
- Offset
- Application:
- Standard Door
- Product Attribute:
- Pivots
- Tags:
- kaba ilco pivot hinge, kaba ilco hinges, pivot door hinges, pivot hinges heavy duty
- Fire Rating:
- No
- Product Category:
- Door Hinges and Pivots
- Product Substrate:
- Aluminum
- Department:
- Door Hardware
Kaba Ilco IP-10-RH-DU-SET – Frequently Asked Questions
1) Will the Kaba Ilco IP-10 intermediate pivot work on an aluminum storefront door?
That is exactly what the IP-10 Series is built for. It is an aluminum-substrate intermediate pivot for aluminum doors and frames, and it covers both recessed door and flush face frame applications. The offset is 3/4 inch (19.05 mm), so it belongs on an offset-hung opening, not a center-hung one. It is a commercial part, not a residential one.
2) Do I have to specify handing when ordering an IP-10 pivot?
Yes, and it is the first thing to get right. The IP-10 is ordered left hand or right hand, and a pivot is handed hardware, so the wrong hand will not hang the door. Pair that with the finish choice: painted aluminum (AL) or dark bronze (DU). Four combinations total, and each hand is offered in both finishes.
3) What is an intermediate pivot for, and do I still need a top and bottom pivot?
An intermediate pivot is the middle hanging point on an offset-hung door. It is not a complete hanging system on its own: the door still needs a top pivot and a bottom (floor) pivot. On the IP-10, the door weight rests on the floor mounted pivot portion so the leaf does not sag, and the bottom pivot portion carries a full race ball bearing. For the matching top half of an offset-hung opening, the Dormakaba 75120 3/4 inch offset full mortise top pivot is a standard duty option at the same offset.
4) Can the IP-10 replace the pivots already on my storefront doors?
In most cases yes. The IP-10 Series is made to replace the pivots used by most major door manufacturers on aluminum doors and frames, and it fits both recessed door and flush face frame conditions. Match the 3/4 inch offset to what is on the door now and match the hand. If your existing pivot is a different offset, this is not a drop-in.
5) My storefront door has dropped and is dragging. Can I adjust it with these pivots?
The IP-10 gives you 1/8 inch (3.18 mm) of vertical adjustment, which is enough to take up a door that has settled slightly and is scraping the threshold. If the sag is more than that, the adjustment will not recover it. The pivots are also replaceable from inside the door, so a swap can be done without pulling the frame apart.
6) Do IP-10 pivot sets come with screws, or do I need to buy fasteners separately?
Fasteners are included with the sets, so nothing extra is needed for the mounting itself. Installation is straightforward and the pivot can be pulled and replaced from inside the door later.
7) What finishes do the Kaba Ilco IP-10 pivots come in, and will they match my dark bronze storefront?
Two stock finishes: AL painted aluminum and DU dark bronze. Dark bronze matches the common bronze anodized storefront package, and clear or mill finish aluminum framing pairs with the painted aluminum. Special order finishes can be had beyond those two.
8) Will an aluminum pivot hold up on an exterior door exposed to weather?
The IP-10 is weatherproof and theft resistant, which is what an exterior storefront entrance needs. The die cast aluminum body and the ball bearing in the bottom pivot portion carry the leaf without a sag point. It is a commercial standard duty part, so for exterior openings with unusually heavy leaves consider a heavy duty set instead, such as the Hager 497 bottom pivot in forged bronze.
9) Should I use an offset pivot or a center hung pivot on my aluminum entrance?
Offset is what the IP-10 is. The pivot point sits 3/4 inch in from the face, the door swings clear of the frame, and the leaf hangs on a top pivot, this intermediate, and a floor pivot. Center hung puts the pivot on the door centerline and is the usual choice where an overhead concealed closer or a full glass balanced entrance is involved. If your existing storefront is already offset hung, stay offset, and match the 3/4 inch dimension.
10) I need to standardize pivots across a building with several aluminum entrances. Is the IP-10 a good fleet choice?
For aluminum storefront openings, yes. One series covers both recessed door and flush face frame conditions, so you are not stocking two different parts for two frame types, and there are only four ordering combinations to track: left or right hand, in painted aluminum or dark bronze. Openings that carry a fire label need a rated pivot instead, since the IP-10 is not fire rated.
11) What is the difference between a Kaba Ilco IP-10 intermediate pivot and a Hager 253 reinforcing pivot?
They are not substitutes. The IP-10 is an offset intermediate pivot on which the aluminum door swings, with a full race ball bearing in the bottom pivot portion and 1/8 inch vertical adjustment. The Hager 253 is a full surface reinforcing pivot for 4-1/2 inch wide hinges in a zinc plated finish, for 1-3/4 inch doors; it reinforces a butt hinge installation rather than replacing the swing hardware. A door hung on butt hinges takes the 253, and an offset hung aluminum door takes the IP-10.
12) Does the IP-10 pivot need any wiring or power?
No power, no wiring. The IP-10 is a purely mechanical pivot with no electronic components, so there is no transfer, no voltage to specify, and nothing to fail when the building loses power. Access control transfer through the opening has to be handled by a separate electric hinge or power transfer device.
How fast can I get the Kaba Ilco IP-10-RH-DU-SET delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Kaba Ilco IP-10-RH-DU-SET come with a warranty?
Absolutely. The Kaba Ilco IP-10-RH-DU-SET is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Kaba Ilco IP-10-RH-DU-SET?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Kaba Ilco IP-10-RH-DU-SET from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.