Klein Tools 51608 1/2-inch Iro...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$72.79
Klein Tools 51608 1/2-inch Iron Conduit Bender Head

Klein Tools 51608 1/2-inch Iron Conduit Bender Head

(No reviews yet) Write a Review

Model: 51608

In Stock (leaves warehouse same day if ordered before 3pm ET)

$72.79
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
3/4-Inch Iron Conduit Bender Head

  • Features

    • Includes markings for 10-Degrees, 22.5-Degrees, 30-Degrees, 45-Degrees, 60-Degrees and corresponding offset multipliers
    • Bold, Cast Markings, Compatible with Angle Setter™
    • Interior hook surface prevents conduit from rolling or twisting during bends
    • Wide foot pedal provides excellent stability, leverage, and comfort
    • Compatible with Klein’s unique Angle Setter™ technology for time-saving, repeated accurate bends (Patent pending Angle Setter™ Cat. No. 51612) and works with Klein Tools' bender handle Cat. No. 51427 (sold separately)
    • 3/4-Inch Iron Bender Head made of heavy duty cast ductile iron is designed for 3/4-Inch EMT or 1/2-Inch rigid IMC
    • Designed to bend 3/4-Inch EMT, 1/2-Inch Rigid and 1/2-Inch IMC conduit
    • Made in USA
    • Advanced casting process for ultimate core strength
    • Bold cast markings and symbols make for fast, easy conduit alignment to make all bend types, including saddle and back-to-back bends

  • Warnings

    • Use a safe work position to avoid loss of balance.
    • Always wear approved eye protection.


51609 - spec sheet

Manufacturer Resources

Spec Sheet

Product Specs

Product Subgroup:
Conduit Benders
Product Type:
Iron Bender Head
Product Height:
6.5000 in
Product Width:
2.5000 in
Product Material:
Iron
Product Group:
Electrical Installation Tools
Product Details:
Iron Bender Head
Department:
Electrical
Country Of Origin:
United States

Klein Tools 51608 – Frequently Asked Questions

1) Does the Klein Tools iron conduit bender head come with a handle?
No handle is included. The iron bender head is the casting only, and it works with Klein Tools' bender handle Cat. No. 51427, which is sold separately. Order the handle along with the head if you don't already have one on the truck.
2) What conduit sizes are available in the Klein iron bender head line?
Three head sizes: 1/2 inch (Cat. No. 51608), 3/4 inch (51609), and 1 inch (51610). All three use the same bender handle, so an electrician running multiple conduit sizes can keep one handle and swap heads.
3) Will the 3/4-inch Klein bender head bend rigid and IMC as well as EMT?
Yes. The 3/4 inch iron head is cut for 3/4 inch EMT and also for 1/2 inch rigid and 1/2 inch IMC. Rigid and IMC have thicker walls and a larger outside diameter than EMT of the same trade size, which is why one head covers 3/4 EMT and 1/2 rigid/IMC.
4) Should I buy an iron bender head or an aluminum one for daily commercial work?
The iron head is the heavier-duty choice. It's cast ductile iron, so it takes repeated hard pulls on rigid and IMC better than a lighter aluminum head, at the cost of carrying more weight up a ladder. If your work is mostly light EMT on service calls and weight matters, aluminum is the easier tool; for a crew bending rigid and IMC all day, go iron.
5) What bend angle markings are on the Klein iron conduit bender head?
Markings are cast in for 10, 22.5, 30, 45 and 60 degrees, with the matching offset multipliers alongside them. Because they're cast rather than stamped or printed, they don't wear off the way painted markings do, and the symbols are laid out for saddle and back-to-back bends as well as plain stub-ups.
6) Does this Klein bender head work with the Angle Setter?
Yes. The iron head is built to accept Klein's Angle Setter, Cat. No. 51612, which lets you repeat the same angle bend after bend without eyeballing the mark. The Angle Setter is a separate item.
7) How does the hook on the Klein iron bender head keep conduit from twisting?
The interior hook surface is shaped to hold the pipe seated through the pull so it won't roll or twist in the shoe, which is what throws an offset out of plane. The foot pedal is wide for stability and leverage when you're putting your weight into the bend.
How fast can I get the Klein Tools 51608 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Klein Tools 51608 come with a warranty?
Absolutely. The Klein Tools 51608 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Klein Tools 51608?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Klein Tools 51608 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!