Klein Tools Cable Bender Tool...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$39.96
Klein Tools Cable Bender Tool

Klein Tools Cable Bender Tool

(No reviews yet) Write a Review

Model: 50400

In Stock (leaves warehouse same day if ordered before 3pm ET)

$39.96
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Klein Tools 50402 14-Inch Cable Bender

The Klein Tools 50402 is a 14-Inch Cable Bender built for electricians who need to form clean, consistent bends in heavier-gauge cable and conduit without kinking or damaging the conductor. Designed as a purpose-built cable-forming tool, the 50402 gives installers the leverage and control needed to shape cable runs accurately on the job, whether in a panel, a junction box, or an open run. Its 14-Inch length provides the reach and mechanical advantage required for repeatable, professional-grade bends in demanding electrical installations.

Key Features

  • Overall Length: 14-Inch design gives electricians the leverage needed to form bends in cable and conduit with less physical effort.
  • Cable Bender Function: Purpose-built for shaping and bending cable runs cleanly, helping prevent kinks, flat spots, or damage to conductors during installation.
  • Jobsite-Ready Design: Sized for use in tight panels, junction boxes, and confined electrical enclosures where precise bend control matters.
  • Klein Tools Reliability: Manufactured by Klein Tools, a trusted name among professional electricians for durable, job-tested hand tools.
  • Repeatable Bend Control: Helps installers achieve consistent bend results across multiple runs, supporting neat, code-compliant cable routing.

Technical Specifications

  • Overall Length: 14-Inch
  • Tool Type: Cable Bender
  • Brand: Klein Tools
  • Model: 50402

Typical Applications

  • Commercial and Industrial Electrical Installations
  • Panelboard and Junction Box Cable Routing
  • Conduit and Cable Forming on New Construction Projects
  • Electrical Renovation and Retrofit Work
  • General Electrical Contractor Toolkits

Why Klein Tools?

Klein Tools has built its reputation on durable, professional-grade hand tools designed for the demands of daily electrical work. The 50402 14-Inch Cable Bender reflects that same commitment, giving electricians a dependable tool for forming accurate, consistent cable bends on every job. Choosing Klein Tools means equipping your crew with tools built to perform reliably in real-world electrical installations.

Product Specs

Product Subgroup:
Conduit Benders
Department:
Electrical
Product Type:
Cable Bender
list_batch:
KLN-20260924
Country Of Origin:
United States
Product Group:
Electrical Installation Tools

Klein Tools 50400 – Frequently Asked Questions

1) What lengths does the Klein Tools cable bender come in, and which model number is which?
Two lengths. The 12 inch tool is model 50400 and the 14 inch tool is model 50402. Order by the model number if you want a specific length, since the only difference between the two is overall length and the leverage that comes with it.
2) Should I get the 12 inch or the 14 inch Klein cable bender?
Go with the 14 inch (model 50402) if you are forming heavier gauge cable or want maximum leverage with less physical effort. The 12 inch (model 50400) is the shorter option when you are working inside a tight panel or enclosure and the longer handle gets in the way. Many electricians carry both.
3) What is the difference between the Klein 50402 cable bender and the Rack-A-Tiers Bend-All 77455?
Both are manual cable benders used to form bends in heavier-gauge cable without kinking the conductor. The Klein 50402 is a 14-inch cable bender, and a 12-inch version is sold as Klein 50400, so the choice there is about leverage and reach in the enclosure. The Rack-A-Tiers 77455 is the Bend-All series bender built of aircraft aluminum, so the body material is the stated distinction rather than a published length.
4) What is a cable bender actually used for on an electrical install?
It forms clean, consistent bends in heavier gauge cable and conduit without kinking the run, flattening it, or damaging the conductor. Electricians use it to dress cable into panelboards and junction boxes and to form open runs so the routing is neat and repeatable across multiple conductors.
5) Will a Klein 50402 cable bender work inside a tight panel or junction box?
Yes, the 50402 is sized for use in panels, junction boxes, and confined electrical enclosures where you need control over where the bend lands. If your enclosure is especially cramped, the 12 inch 50400 gives up some leverage for a shorter handle swing.
6) Can I use a cable bender instead of a conduit bender?
The Klein 50400 and 50402 are cable benders, built for shaping cable and conduit runs by hand to dress them into enclosures. They are not a substitute for a shoe-type conduit bender used to put a stub, offset, or saddle with a measured radius into EMT or rigid. Use the cable bender for forming and routing; use a conduit bender when the bend radius has to be a specific angle and sweep.
7) If the Klein 14-inch bender is too long to work inside a tight junction box, what should I use instead?
Step down to the 12-inch Klein cable bender, part number 50400, which is the same tool in a shorter overall length for confined enclosures. The 14-inch 50402 trades that compactness for added leverage. A Rack-A-Tiers 77455 Bend-All manual bender is another manual cable-forming option, built of aircraft aluminum.
8) Is the Klein cable bender a manual tool or does it need a power source?
It is a hand tool. The 50400 and 50402 are manual benders that work on leverage from the handle length alone, so there is no battery, hydraulic pump, or hose to bring to the job. A manual bender in the same vein is the Rack-A-Tiers 77455 Bend-All.
9) Will the Klein cable bender help keep cable routing code compliant?
It helps on the workmanship side. The tool gives repeatable bend results across multiple runs so the conductors stay neatly routed and you avoid kinks and flat spots, which is what damages insulation and conductors during install. The actual minimum bend radius for your cable still comes from the cable manufacturer and the code article that applies to the conductor type.
How fast can I get the Klein Tools 50400 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Klein Tools 50400 come with a warranty?
Absolutely. The Klein Tools 50400 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Klein Tools 50400?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Klein Tools 50400 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!