Klein Tools

Tree Climbers with Gaffs 17 to 21-Inch Features Adjustable Length Steel Sleeve Steel split ring secures ankle strap in place and allows for quick replacement Sold in pairs only Made in...

Hex Bar, 24-Inch Warnings Always wear approved eye protection. Features 24 inch length Provides extra leverage when positioning steel members and aligning bolt holes Chisel-end is at a 15-degree...

Ratcheting Heat Shrink Terminal Crimper, 10 to 22 AWG Wire Features Dual-material molded grips provide added comfort Unique cavity design provides consistent crimp from either side of the tool Three...

Large Size Hole Saw Kit Features Saw diameters are 3'' (76 mm), 3-5/8'' (92 mm), 4-1/8'' (105 mm), and 4-1/2'' (114 mm). Contains the sizes necessary to upgrade a basic hole saw kit into a master...

Chicago® Grip Bell-System Type H Grip Features Outside diameter of support wire includes thickness of polyethylene coating H" Strand Puller -- Equipped with a Chain, Toggle and Shackle Made in...

Grip for High Strength Cables 0.218-Inch Features Manufactured from drop-forged, heat-treated steel for excellent durability For larger conductors, see our grips with round inside-jaw contour Made...

Replacement Blades for Large Cable Strippers Warnings Always wear approved eye protection. NOT insulated. Plastic-dipped or slip-on plastic handles are NOT intended for protection against electrical...

Pocket Knife 2-1/4-Inch Steel Coping Blade Warnings Check local law on the legality of selling, carrying, or possessing this knife. Always wear approved eye protection. Never use on or near live...

12" Reciprocating Saw Blade 6 TPI, 15 Pk Features 1/2'' (13 mm) universal shank to fit all popular reciprocating saw tools. Bi-metal blades in a variety of blade lengths and thicknesses for...

10-in-1 Multi-Bit Screwdriver / Nut Driver (12-Pack) Features The following replacement bits are available - see Cat. No. 32482 (#1 Phillips and 3/16'' [5 mm] Slotted), Cat. No. 32483 (#2 Phillips...

Diagonal Cutting Pliers, Insulated, Angled Head, 8-Inch Warnings Always wear approved eye protection. Always inspect your tools before use. Keep tool clean, dry and free of any surface contaminants...

Moving Blade Set for 2017 Edition 63711 Cable Cutter Features Hardened steel blade for lasting strength and sharpness Replacement blade set For versions made after 2017 Hard Steel for Lasting...

Haven's® Cable Grip 0.5-Inch Capacity Features Rigorously tested and pulled to rated load to ensure the highest quality and reliability Individually hand inspected and actuated for proper...

Bi-Metal Hole Saw, 2-1/2-Inch Warnings Read and follow safety instructions in power tool owners manual. Never use on or near live electrical circuits. Always wear approved eye protection...

Warnings Keep tool clean, dry and free of any surface contaminants. Destroy tool if the insulation is damaged in any way. Only use tools that are marked with the official international 1000-volt...

Crimping and Cutting Tool for Non-Insulated Terminals Warnings Always wear approved eye protection. NOT insulated. Plastic-dipped or slip-on plastic handles are NOT intended for protection against...

Grip for High Strength Cables 0.62-Inch Warnings Grips are to be used for temporary installation, not for permanent anchorage. When used on/near energized lines, ground, insulate, or isolate grip...

Bent Trimmer, Large Ring, Blue Coating, 6-Inch Features Extra blunt blade tip Ergonomic design for added comfort and leverage Scissors are chrome over nickel plated, carbon steel and resists...

2-3/4-Inch Tree Climbers with Gaffs 15 to 19-Inch Features To determine size needed, measure from instep to 1-Inch (25 mm) below knee Extra-long gaffs for maximum penetration when climbing...

Knurled Parallel Jaw Grip 4-3/8-Inch Length Features Same as Cat. No. 1686-10, but with knurled jaws Longer Jaw and Large Diameter Eye Longer jaws achieve a firm hold, reducing possibility of...