You may also like
Emtek Flat Track Sliding Door Hardware - Steel
Model: EMTEK-FLAT-TRACK-SLIDING-BARN-DOOR-HARDWARE
Emtek Flat Track Sliding Door Hardware - Steel- Includes 1 pair Hangers with Wheels, Stops, Fasteners, Anti-Jump Mechanism, and Floor Guide- Available track lengths: 5', 6'6", 8', 10', 13', and 16'-...
Emtek
Starting at
$901.00
$720.80
Leviton 13551-NW Fixed End Slide Mount, Curtain Track Hardware
The Leviton 13551-NW is a Fixed End Slide Mount designed as an anchor-point hardware component for sliding curtain track systems, commonly used in hospital and healthcare privacy curtain installations. This fitting secures one end of the curtain track run while allowing the track's carriers and glide components to move freely along the rail, providing a dependable stop point for curtain travel. As a purpose-built mounting accessory, the 13551-NW is engineered to integrate directly with compatible slide-track curtain systems, giving installers a straightforward way to terminate a track section without compromising the smooth operation of the sliding hardware.
Key Features
- Fixed End Configuration: Anchors one end of the curtain track run, establishing a defined stop point for sliding carriers.
- Slide Mount Design: Built to work with slide-type curtain track carriers, supporting smooth, low-friction travel along the rail.
- Purpose-Built Hardware: A dedicated end-mount fitting rather than a generic bracket, intended to match the profile and function of compatible curtain track systems.
- Simple Installation: Designed to attach at the terminating end of a track run, streamlining setup for facilities installing or servicing curtain track systems.
- Model Identification: Manufactured under Leviton part number 13551-NW for accurate matching and replacement within existing track hardware sets.
Technical Specifications
- Product Type: Curtain Track Fixed End Slide Mount
- Model Number: 13551-NW
- Refer to manufacturer documentation for complete dimensional and material specifications.
Typical Applications
- Hospital and Healthcare Privacy Curtain Systems
- Curtain Track Installation and End Termination
- Curtain Track Repair and Hardware Replacement
- Commercial and Institutional Sliding Curtain Assemblies
Why Leviton?
Leviton is a trusted name for facility and building hardware, and the 13551-NW Fixed End Slide Mount continues that standard by providing a dedicated, correctly identified component for curtain track end termination. Choosing the manufacturer-specified fitting helps ensure proper fit and function within existing track systems, supporting reliable, long-term performance for facilities that depend on smooth-operating curtain hardware.
Manufacturer Resources
Product Specs
- list_batch:
- LEV-20260924
- Product Type:
- Curtain Track Mount
- Configuration:
- Fixed End Slide Mount
- Department:
- Electrical
- Product Subgroup:
- Parts & Accessories
Leviton 13551-NW – Frequently Asked Questions
1) What does the Leviton 13551-NW fixed end slide mount actually do on a curtain track run?
The 13551-NW is an end fitting for a sliding curtain track. It anchors one end of the track run and gives the carriers a defined stop point, so the curtain stops travelling at the end of the rail instead of running off it. The slide carriers and glides still move freely along the rest of the rail. It is a dedicated end-termination fitting, not a general-purpose bracket.
2) Will the 13551-NW fit any brand of curtain track, or only slide-type track?
It is built for slide-type curtain track carriers and is intended to match the profile of compatible slide-track systems. If your track uses a different carrier type or a different rail profile, this fitting is not the one to order. Pull the existing end fitting and confirm the rail profile matches before you buy a replacement.
3) Is the 13551-NW the right part for hospital privacy curtain track?
Yes. Healthcare privacy curtain systems are the common application for the 13551-NW, both on new track installations and on repair work where an end fitting has been damaged or lost. It also gets used on commercial and institutional sliding curtain assemblies of the same slide-track type.
4) What part number do I order to match an existing Leviton curtain track end mount?
Order Leviton 13551-NW. That is the manufacturer part number for the fixed end slide mount, and it is the single model offered, so there are no finish or size options to specify. Matching the manufacturer number is the way to keep the fitting in profile with the existing track hardware set.
5) Does a fixed end mount replace a stop or do I need both ends?
The fixed end slide mount terminates one end of the track run. A full run is terminated at both ends, so if you are building out a new track you need an end fitting at each end, not just one 13551-NW. For a repair, order one per end you are replacing.
How fast can I get the Leviton 13551-NW delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Leviton 13551-NW come with a warranty?
Absolutely. The Leviton 13551-NW is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Leviton 13551-NW?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Leviton 13551-NW from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.