Metallics JMPMP310 M3 x 10mm P...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.13
$0.13
Metallics JMPMP310 M3 x 10mm Pan Head Phillips Machine Screws - Steel Zinc - 100qty

Metallics JMPMP310 M3 x 10mm Pan Head Phillips Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JMPMP310
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.13
$0.13
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
M3 x 10mm Pan Head Phillips Machine Screws - Steel Zinc - 100qty

  • Features

    • Pan head with Phillips Drive
    • M3 Diameter, 10mm Length
    • Steel Zinc Material

  • Additional Notes

    • METRIC|other sizes and quantities available by request

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ISO 1580
Division:
Electrical H1
Drive Type:
Phillips
Fastener Head Height:
1.66 - 1.8 in.
Fastener Head Type:
Pan
Fastener Head Width:
5.3 - 5.6 in.
Fastener Length:
10mm
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell B71-99.5
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Head_Screw_Steel_Metric_2018.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.233 lbs
Product Width:
3 in
Sub Division:
Electrical-E H2
Tensile Strength:
420 N/mm2 minimum
Thread Pitch:
0.5
Wall Thickness:
0.7
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
MPMP
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JMPMP310 – Frequently Asked Questions

1) What thread pitch do the Metallics JMPMP310 M3 machine screws use, and will they thread into a standard M3 tapped hole?
Thread pitch is 0.5mm, which is the standard coarse M3 pitch, so these thread into any normal M3 tapped hole or M3 nut. Thread diameter is M3 and length under the head is 10mm.
2) Are these metric screws or imperial? I don't want to mix M3 with 6-32 in a panel.
Metric only. The JMPMP310 is an M3 x 10mm screw built to ISO 1580 for metric pan head screws, so it will not engage a 6-32 imperial tapped hole even though the two sizes look close. If the enclosure or device was tapped in imperial, you need a 6-32 machine screw instead.
3) Do the Metallics JMPMP310 screws meet Buy American or ARRA requirements for a government project?
No. These are not Buy American compliant and not ARRA compliant, and country of origin is multiple. On a federally funded job with domestic sourcing requirements, you will need a domestically produced fastener instead.
4) How are these M3 pan head screws packaged, and what is the minimum I can buy?
They ship in a jar of 100 pieces, and 100 is the order minimum. Net weight of the jar is 0.233 lbs. Other sizes and quantities are available by request.
5) What driver do I need for the Metallics JMPMP310, and will the head sit flat against a cover plate?
Phillips drive, and the head is a pan type, so it seats flat on the surface with a low rounded crown rather than sinking flush. If you need the fastener to disappear into the material, a flat head countersunk screw is the one to use, not a pan head.
6) Are these zinc plated steel screws suitable for outdoor or wet locations?
Material is zinc plated steel, which is a dry indoor-use finish. For wet, damp or corrosive locations, specify stainless steel machine screws instead of the zinc plated steel JMPMP310.
7) What is the tensile strength and hardness of these M3 machine screws?
Minimum tensile strength is 420 N/mm2 and hardness is Rockwell B71 to 99.5. That is a standard low-carbon steel class, fine for securing devices, plates, and enclosure components, not for structural or high-torque joints.
8) What are these M3 x 10mm screws typically used for on a job?
Metallics lists them for the electrical, plumbing, heating and air conditioning trades. In practice that means fastening devices, covers, brackets, and small components into metric tapped holes on equipment and enclosures.
How fast can I get the Metallics JMPMP310 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JMPMP310 come with a warranty?
Absolutely. The Metallics JMPMP310 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JMPMP310?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JMPMP310 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!