Metallics JMPMP36 M3 x 6mm Pan...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.11
$0.11
Metallics JMPMP36 M3 x 6mm Pan Head Phillips Machine Screws - Steel Zinc - 100qty

Metallics JMPMP36 M3 x 6mm Pan Head Phillips Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JMPMP36
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.11
$0.11
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
M3 x 6mm Pan Head Phillips Machine Screws - Steel Zinc - 100qty

  • Features

    • Pan head with Phillips Drive
    • Steel Zinc Material
    • M3 Diameter, 6mm Length

  • Additional Notes

    • METRIC|other sizes and quantities available by request

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ISO 1580
Division:
Electrical H1
Drive Type:
Phillips
Fastener Head Height:
1.66 - 1.8 in.
Fastener Head Type:
Pan
Fastener Head Width:
5.3 - 5.6 in.
Fastener Length:
6mm
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell B71-99.5
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Head_Screw_Steel_Metric_2018.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.195 lbs
Product Width:
3 in
Sub Division:
Electrical-E H2
Tensile Strength:
420 N/mm2 minimum
Thread Pitch:
0.5
Wall Thickness:
0.7
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
MPMP
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JMPMP36 – Frequently Asked Questions

1) Is the Metallics JMPMP36 M3 screw a coarse metric thread, and what nut or tapped hole does it need?
The JMPMP36 is M3 with a 0.5 mm thread pitch, which is the standard coarse metric pitch for M3. It mates with any M3-0.5 nut or tapped hole. If your device is tapped M3 x 0.35 fine pitch, this screw will not thread in.
2) Will zinc plated steel M3 screws hold up outdoors or in a wet location?
Material is zinc plated steel, which is a dry indoor finish. It handles general electrical, plumbing, and HVAC interior work fine, but for wet, washdown, coastal, or corrosive environments you want stainless steel M3 pan head screws instead. Zinc plating will eventually bloom and rust in standing moisture.
3) Can I use the Metallics JMPMP36 on a Buy American or ARRA funded project?
No. The JMPMP36 is flagged as not Buy American compliant and not ARRA compliant, with multiple countries of origin. On a federally funded job with domestic sourcing requirements you will need a domestically produced M3 pan head screw instead.
4) Is M3 x 6mm the same as a #4 or #6 imperial machine screw?
No. This is a metric screw, M3 diameter with 0.5 mm pitch, built to ISO 1580. It will not thread into an imperial tapped hole such as 4-40 or 6-32, and an imperial screw will not thread into an M3 hole. If the equipment is metric, usually imported panels, devices, and HVAC controls, M3 is what you need. Other metric sizes and quantities are available by request.
5) How much thread length do I actually get with a 6mm M3 pan head screw?
Fastener length on the JMPMP36 is 6 mm. On a pan head screw that length is measured under the head, so you get the full 6 mm of thread into the tapped hole. It is a short screw, meant for thin sheet metal, device plates, and enclosure covers rather than anything with depth to it.
6) Is a pan head the right choice, or should I use a flat head screw instead?
The JMPMP36 has a pan head, which seats on top of the surface and needs no countersink, so it is the one to use on flat sheet metal, plates, and enclosure covers. If the drawing calls for a flush surface, you need a countersunk flat head screw and a chamfered hole instead; a pan head will stand proud. Drive is Phillips.
7) What dimensional standard do these Metallics M3 pan head screws conform to?
They are built to ISO 1580, the standard for slotted/cross-recessed pan head metric machine screws. If your spec or drawing calls out ISO 1580 pan head M3, this screw meets that designation.
8) Are these M3 machine screws strong enough for structural or load bearing use?
Tensile strength is 420 N/mm2 minimum with a hardness of Rockwell B71-99.5, which is standard low carbon commercial machine screw material. That is right for securing devices, covers, brackets, and panel components. It is not a high strength or Grade 8.8 class fastener, so do not substitute it where a drawing calls out a property class for load bearing connections.
How fast can I get the Metallics JMPMP36 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JMPMP36 come with a warranty?
Absolutely. The Metallics JMPMP36 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JMPMP36?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JMPMP36 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!