Metallics JMPMP465SS M4 x 65mm...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$51.00
$1.69
Metallics JMPMP465SS M4 x 65mm Pan Head Phillips Machine Screws - 18-8 Stainless - 100qty

Metallics JMPMP465SS M4 x 65mm Pan Head Phillips Machine Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JMPMP465SS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$51.00
$1.69
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
M4 x 65mm Pan Head Phillips Machine Screws - 18-8 Stainless - 100qty

  • Features

    • M4 Diameter, 65mm Length
    • Pan head with Phillips Drive
    • 18-8 Stainless Material

  • Additional Notes

    • METRIC|other sizes and quantities available by request

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Country Of Origin:
MUL
Dimensional Standard:
ISO 1580
Division:
Electrical H1
Drive Type:
Phillips
Fastener Head Height:
2.26 - 2.4 in.
Fastener Head Type:
Pan
Fastener Head Width:
7.64 - 8 in.
Fastener Length:
65mm
Hardness:
Rockwell B71-99.5
Language Code:
EN
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Family:
Electrical Supplies
Product Group:
Fasteners
Remarks:
The catalog UPC differ from the tarnsaction daat spreadsheet UPC
Sub Division:
Electrical-E H2
Tensile Strength:
420 N/mm2 minimum
Thread Pitch:
0.7
Wall Thickness:
1
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
MPMP
Product Details:
Machine Screw
Product Material:
18-8 Stainless

Metallics JMPMP465SS – Frequently Asked Questions

1) What thread pitch is the Metallics JMPMP465SS M4 x 65mm machine screw, and will it thread into a standard M4 tapped hole?
Thread pitch is 0.7 mm, which is the standard coarse M4 pitch. So it threads into any standard M4 x 0.7 tapped hole or M4 nut. It will not work in a fine-pitch M4x0.5 hole, and it is metric only, so do not try to substitute it for a #8-32 or 10-24 machine screw in an imperial-tapped enclosure.
2) Do these M4 x 65mm stainless screws meet Buy American or ARRA requirements for a government job?
No. The Metallics JMPMP465SS is not Buy American compliant and is not ARRA compliant, with country of origin listed as multiple. On a federally funded project with domestic sourcing language in the spec, this part will not satisfy it, so source a domestic fastener for that scope.
3) Are these M4 x 65mm pan head Phillips screws stainless and suitable for damp or outdoor electrical work?
They are 18-8 stainless steel, the austenitic grade commonly used for corrosion resistance in wet, damp, and outdoor locations. That makes them a practical choice for exterior boxes, marine-influenced sites, and washdown areas where a zinc-plated screw would rust. 18-8 is also non-magnetic in the annealed condition, which matters if you are mounting near sensors or instrumentation.
4) What dimensional standard does the JMPMP465SS pan head screw follow?
The screw is made to ISO 1580, the metric standard for slotted/cross-recessed pan head screws. If your drawing or panel spec calls out an ISO 1580 pan head in M4, this meets that callout. The drive is Phillips, so bring a PH2 driver rather than a slotted or Pozi bit.
5) How are these Metallics M4 machine screws packaged and what is the minimum I can buy?
They ship in a jar, with a minimum order of 100 count. So you are buying a jar of 100 M4 x 65mm screws rather than loose singles, which is the usual way an MRO or panel shop stocks a common fastener size.
How fast can I get the Metallics JMPMP465SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JMPMP465SS come with a warranty?
Absolutely. The Metallics JMPMP465SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JMPMP465SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JMPMP465SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!