Metallics JMPMP516SS M5 x 16mm...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$192.86
Metallics JMPMP516SS M5 x 16mm Pan Head Phillips Machine Screws - 18-8 Stainless - 100qty

Metallics JMPMP516SS M5 x 16mm Pan Head Phillips Machine Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JMPMP516SS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$192.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
M5 x 16mm Pan Head Phillips Machine Screws - 18-8 Stainless - 100qty

  • Additional Notes

    • METRIC|other sizes and quantities available by request

  • Features

    • 18-8 Stainless Material
    • Pan head with Phillips Drive
    • M5 Diameter, 16mm Length

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ISO 1580
Division:
Electrical H1
Drive Type:
Phillips
Fastener Head Height:
2.86 - 3 in.
Fastener Head Type:
Pan
Fastener Head Width:
9.14 - 9.5 in.
Fastener Length:
16mm
Hardness:
Rockwell B71-99.5
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Head_Screw_Steel_Metric_2018.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.86 lbs
Product Width:
3 in
Sub Division:
Electrical-E H2
Tensile Strength:
420 N/mm2 minimum
Thread Pitch:
0.8
Wall Thickness:
1.2
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
MPMP
Product Details:
Machine Screw
Product Material:
18-8 Stainless

Metallics JMPMP516SS – Frequently Asked Questions

1) What thread pitch do the Metallics JMPMP516SS M5 machine screws have, and will they thread into a standard M5 tapped hole?
Thread pitch is 0.8 mm, which is the standard coarse pitch for M5. They'll thread into any M5 x 0.8 tapped hole or M5 nut. The screw is 16 mm long under the pan head, so allow for that when figuring grip length plus thread engagement.
2) Are these M5 pan head screws stainless and OK for outdoor or damp locations?
They're 18-8 stainless, the common austenitic grade used for general corrosion resistance. That makes them suitable for damp interior work, outdoor enclosures, and wash-down areas where plated carbon steel would rust. For salt spray or chlorinated environments, 316 is the usual step up.
3) Do these metric pan head screws meet a dimensional standard so the head will sit right in a countersink or recess?
Head geometry follows ISO 1580, the metric standard for slotted/cross-recess pan head screws, so the head diameter and height match what any ISO 1580 drawing or clearance detail calls for. Pan head means it sits proud of the surface with a flat bearing face, not flush, so it is not a substitute for a flat head in a countersunk hole.
4) Will M5 x 16mm screws work for mounting electrical devices and enclosure covers?
That's the intended use. Metallics catalogs the MPMP series as electrical-supply machine screws, and M5 x 16 mm in 18-8 stainless is a common size for enclosure covers, panel mounting, DIN rail, and bracket work with tapped M5 holes. Note it's metric, so it will not thread into 10-24 or 10-32 device prep found on North American boxes and plates.
5) How many M5 x 16mm screws come in a jar, and can I buy just a few?
They ship in a jar with a 100-count minimum, so the smallest order is a 100-piece jar rather than loose pieces. Metallics notes other sizes and quantities are available by request.
6) What driver do I need for the Metallics JMPMP516SS screws?
Phillips cross recess. For an M5 pan head, a #2 Phillips bit is the normal fit. Stainless galls easily, so drive them with steady pressure and avoid overspeeding an impact driver on tapped aluminum.
7) Can I use these on a federally funded job with domestic sourcing requirements?
Metallics lists these M5 screws as Buy American compliant and ARRA compliant, with country of origin China. Procurement offices read those two flags differently depending on the contract clause in play, so match the flag to the clause your spec cites before committing on a public job.
8) How much does a jar of these M5 stainless screws weigh?
A jar runs 0.86 lbs, with the container measuring 3 x 3 x 2.15 inches. Useful if you're estimating a parts bin layout or shipping weight on a multi-jar MRO order.
How fast can I get the Metallics JMPMP516SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JMPMP516SS come with a warranty?
Absolutely. The Metallics JMPMP516SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JMPMP516SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JMPMP516SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!