Metallics JMPMP830SS M8 x 30mm...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$385.71
Metallics JMPMP830SS M8 x 30mm Pan Head Phillips Machine Screws - 18-8 Stainless - 100qty

Metallics JMPMP830SS M8 x 30mm Pan Head Phillips Machine Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JMPMP830SS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$385.71
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
M8 x 30mm Pan Head Phillips Machine Screws - 18-8 Stainless - 100qty

  • Features

    • M8 Diameter, 30mm Length
    • Pan head with Phillips Drive
    • 18-8 Stainless Material

  • Additional Notes

    • METRIC|other sizes and quantities available by request

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ISO 1580
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#4
Fastener Head Height:
4.5 - 4.8 in.
Fastener Head Type:
Pan
Fastener Head Width:
15.57 - 16 in.
Fastener Length:
30mm
Hardness:
Rockwell B71-99.5
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Head_Screw_Steel_Metric_2018.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.91 lbs
Product Width:
3 in
Sub Division:
Electrical-E H2
Tensile Strength:
420 N/mm2 minimum
Thread Pitch:
1.25
Wall Thickness:
1.9
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
MPMP
Product Details:
Machine Screw
Product Material:
18-8 Stainless

Metallics JMPMP830SS – Frequently Asked Questions

1) What thread pitch do the Metallics JMPMP830SS M8 machine screws use, and will they thread into a standard M8 nut?
Thread pitch is 1.25 mm, which is the standard coarse pitch for M8. They will thread into any standard M8 coarse nut, tapped hole, or threaded insert. If your assembly was tapped M8 x 1.0 fine, these are the wrong screw.
2) What size Phillips bit drives the JMPMP830SS screws?
A #4 Phillips. These are Phillips drive, and at M8 the recess is larger than the #2 and #3 bits most crews carry on a driver, so stock the #4 before the install or you will cam out and chew the recess.
3) Are these M8 screws suitable for outdoor or damp locations, like exterior panel boxes and wet rooms?
They are 18-8 stainless, which handles exterior, damp, and washdown service without plating that can chip or rust-bleed. 18-8 is the common austenitic grade for general corrosion resistance; for salt-spray coastal or pool chemical exposure, a 316 stainless fastener is the better call.
4) How much usable length do I get from a 30mm M8 pan head screw?
The 30mm is the shank length under the pan head, so all 30mm goes into the joint. Subtract your material and washer stack to find thread engagement in the tapped hole. On a metric machine screw the head sits proud rather than flush, so no countersink prep is needed.
5) Do these metric pan head screws meet a dimensional standard I can put on a submittal?
Head geometry conforms to ISO 1580, the standard for metric slotted and cross-recessed pan head screws. That is the spec to reference when a drawing or submittal calls for an ISO pan head rather than a DIN or imperial equivalent.
6) Is the JMPMP830SS sold individually or do I have to buy a full jar?
They ship in a jar with a 100-count minimum, so the order unit is the jar of 100 rather than a single screw. Metallics does offer other sizes and quantities in the MPMP series on request.
7) Do these Metallics machine screws qualify for Buy American or ARRA-funded work?
The JMPMP830SS is flagged compliant for both Buy American and ARRA, with country of origin listed as multiple. For a federally funded job, cite the compliance flags on the Metallics part number in your submittal package.
8) What does a jar of 100 M8 x 30mm stainless screws weigh for a service truck or tool bag?
The packaged jar runs 0.91 lbs. Easy to carry a couple of sizes on the truck without adding real weight to the bag.
How fast can I get the Metallics JMPMP830SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JMPMP830SS come with a warranty?
Absolutely. The Metallics JMPMP830SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JMPMP830SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JMPMP830SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!