Metallics JMPMP665SS M6 x 65mm...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$192.86
Metallics JMPMP665SS M6 x 65mm Pan Head Phillips Machine Screws - 18-8 Stainless - 100qty

Metallics JMPMP665SS M6 x 65mm Pan Head Phillips Machine Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JMPMP665SS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$192.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
M6 x 65mm Pan Head Phillips Machine Screws - 18-8 Stainless - 100qty

  • Additional Notes

    • METRIC|other sizes and quantities available by request

  • Features

    • Pan head with Phillips Drive
    • M6 Diameter, 65mm Length
    • 18-8 Stainless Material

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ISO 1580
Division:
Electrical H1
Drive Type:
Phillips
Fastener Head Height:
3.3 - 3.6 in.
Fastener Head Type:
Pan
Fastener Head Width:
11.57 - 12 in.
Fastener Length:
65mm
Hardness:
Rockwell B71-99.5
Language Code:
EN
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Remarks:
The catalog UPC differ from the tarnsaction daat spreadsheet UPC
Sub Division:
Electrical-E H2
Tensile Strength:
420 N/mm2 minimum
Thread Pitch:
1
Wall Thickness:
1.4
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
MPMP
Product Details:
Machine Screw
Product Material:
18-8 Stainless

Metallics JMPMP665SS – Frequently Asked Questions

1) What thread pitch do the Metallics M6 x 65mm machine screws use?
The JMPMP665SS runs a 1 mm thread pitch, which is standard coarse M6. If the tapped hole or nut you're threading into is M6-1.0, these drop straight in. Fine-pitch M6 (0.75) hardware will not accept them.
2) Are these M6 screws metric or imperial thread?
Metric. The M6 x 65mm Metallics pan head screw is built to ISO 1580, the metric standard for slotted/pan head machine screws, with a 1 mm pitch. It will not thread into a 1/4-20 or any imperial tapped hole.
3) Do these screws qualify for Buy American or ARRA federal projects?
No. The Metallics M6 x 65mm 18-8 stainless machine screw is not Buy American compliant and is not ARRA compliant, with country of origin listed as multiple. On a federally funded job with domestic sourcing requirements, you'll need a domestic-origin fastener instead.
4) Will 18-8 stainless machine screws hold up outdoors or in a damp mechanical room?
18-8 stainless is the standard corrosion-resistant austenitic grade and handles exterior and wash-down conditions far better than plain or zinc-plated steel. The Metallics M6 x 65mm pan head screws are 18-8 throughout, so there's no plating to wear off. For chloride-heavy coastal or pool environments, 316 is the step up.
5) Is a pan head Phillips screw the right choice for mounting electrical devices and plates?
Pan head gives you a broad, slightly domed bearing surface that sits on top of the material, so it's the usual pick for clamping brackets, boxes, covers and device mounting where you don't need a flush finish. The Metallics M6 x 65mm takes a Phillips driver. If the head has to sit flush in a countersunk hole, you want a flat head instead.
6) How are these Metallics M6 screws packaged and what is the minimum order?
They ship in a jar, with a minimum order of 100 count. Other sizes and quantities can be had by request.
How fast can I get the Metallics JMPMP665SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JMPMP665SS come with a warranty?
Absolutely. The Metallics JMPMP665SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JMPMP665SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JMPMP665SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!