MAG BALLAST (2) F20T12 PH 120V IC PK
RL2SP20TPI - spec sheet
Certifications and Standards
- BAA
- EU RoHS
- ARRA
RL2SP20TPI - spec sheet
Manufacturer Resources
Product Specs
- Application:
- HOUSEHOLD
- Ballast Factor:
- 0.61
- Country Of Origin:
- USA
- Efficacy:
- 1.696132597
- Frequency Rating:
- 60 HZ
- Housing Material:
- Metal
- Lamp Type:
- T12
- Number Of Lamps:
- 2
- Power Factor:
- NORMAL
- Product Height:
- 1.5000 IN
- Product Length:
- 6.5000 IN
- Product Type:
- Magnetic Fluorescent
- Product Wattage:
- 20 WTT
- Product Weight:
- 2.500 Lbs
- Product Width:
- 2.3800 IN
- Special Features:
- UL, CSA, RoHS
- Start Type:
- PREHEAT
- Total Harmonic Distortion:
- 10
- Voltage Rating:
- 120 V
- Wire Gauge:
- 18 AWG
- Wire Type:
- Solid
- Department:
- Electrical
Advance RL2SP20TPI – Frequently Asked Questions
1) What lamps does the Advance RL2SP20TPI ballast run?
The RL2SP20TPI is a magnetic preheat ballast for two F20T12 lamps, 20 watts each, on a 120 volt 60 Hz supply. It is a preheat start circuit, so it is intended for preheat T12 lamps with starters, not for rapid start or instant start T8 lamps.
2) Will this Advance magnetic ballast fit inside my existing fluorescent fixture channel?
Case size is 6.5 inches long by 2.38 inches wide by 1.5 inches high, weighing 2.5 pounds in a metal housing. Measure the channel cavity of the fixture you are retrofitting against those numbers before ordering, since older two lamp F20T12 fixtures vary in channel depth.
3) Is this Advance ballast UL listed and RoHS compliant?
It carries UL, CSA and RoHS. The product data also lists BAA, ARRA and EU RoHS compliance, which matters on federally funded work with domestic sourcing requirements. It is made in the USA.
4) Is this a normal power factor or high power factor ballast?
Normal power factor, with total harmonic distortion of 10. Normal power factor units draw more line current per lamp watt than a high power factor ballast, so on a circuit feeding many fixtures, count your load carefully. For facilities with power factor requirements in the lighting spec, this is not the unit to standardize on.
5) Is this ballast meant for commercial fixtures or residential ones?
Advance classes the RL2SP20TPI as a household application ballast. It is the common replacement part for two lamp 20 watt T12 preheat fixtures such as under cabinet, utility and closet lights in apartments and residences. Property managers replacing the ballast in a unit's kitchen strip light are the typical buyer.
How fast can I get the Advance RL2SP20TPI delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Advance RL2SP20TPI come with a warranty?
Absolutely. The Advance RL2SP20TPI is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Advance RL2SP20TPI?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Advance RL2SP20TPI from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.