Cooper Wiring Devices Manual M...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$117.96
Cooper Wiring Devices Manual Motor Controller, Three-Pole, 30A/600V

Cooper Wiring Devices Manual Motor Controller, Three-Pole, 30A/600V

(No reviews yet) Write a Review

Model: 7810UDST

In Stock (leaves warehouse same day if ordered before 3pm ET)

$117.96
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Cooper Wiring Devices Manual Motor Controller, Three-Pole, 30A/600V

The Cooper Wiring Devices Manual Motor Controller is a three-pole, single-throw switch built for industrial three-phase motor disconnect and control applications. Rated 600V and 30A, it features a glass-filled nylon housing, a short toggle actuator, and a maintained closure for dependable on/off switching. Housed in a stainless steel NEMA Type 1 enclosure, this controller is front-wired and accepts #14-10 AWG conductors for straightforward panel installation. Its gray housing and industrial-grade construction make it a solid choice for manufacturing, processing, and general industrial facilities.

Key Features

  • Three-Pole, Single-Throw Switching: Three-pole, single-throw configuration with maintained closure and a short toggle actuator for reliable three-phase motor disconnect and control.
  • Durable Construction: Molded from glass-filled nylon for a rugged, impact-resistant housing suited to demanding industrial environments.
  • Front Wiring Method: Front-wired terminals accept #14-10 AWG conductors for straightforward installation and servicing.
  • Electrical Rating: Rated 600V and 30A for three-phase industrial motor control applications.
  • Three-Phase Application: Designed for three-phase circuits, making it well suited to industrial motor loads.
  • NEMA Type 1 Enclosure: Stainless steel NEMA Type 1 enclosure protects internal components in general-purpose indoor industrial settings.
  • Gray Finish: Gray housing color for consistent industrial panel aesthetics.

Certifications & Compliance

  • NEMA Type 1 Enclosure Rating

Technical Specifications

  • Amperage Rating: 30A
  • list_batch: COOPER-20260730

Typical Applications

  • Industrial Motor Disconnect and Control
  • Three-Phase Motor Circuits
  • Panelboard and Motor Control Center Installations
  • Manufacturing and Processing Facilities
  • New Construction and Retrofit Motor Control Upgrades

Why Cooper Wiring Devices?

Cooper Wiring Devices builds this manual motor controller with a glass-filled nylon housing and a stainless steel NEMA Type 1 enclosure for dependable performance in demanding industrial settings. The three-pole, single-throw design carries a 600V, 30A rating for three-phase motor circuits, with front wiring that accepts #14-10 AWG conductors for efficient installation. A maintained closure and short toggle actuator give operators clear, positive control over motor circuits. This combination of rugged materials and industrial-grade electrical ratings helps electrical professionals deliver reliable, code-compliant motor control installations across industrial and manufacturing environments.

Manufacturer Resources

Product Specs

Voltage Rating:
600V
Actuator:
Short toggle
Number Of Poles:
Three-pole
Throw:
Single-throw
Wiring Method:
Front
Allowable Wire Size:
#14-10 AWG
Application:
Industrial
Closure Type:
Maintained
Amperage Rating:
30A
Configuration:
NEMA Type 1
Phase:
Three-phase
Enclosure Material:
Stainless steel
Product Type:
Manual Motor Controller
Product Material:
Glass-Filled Nylon
Product Color:
Gray
Department:
Electrical
Product Group:
Wiring Devices
Product Subgroup:
Electrical Controls

Cooper Wiring Devices 7810UDST – Frequently Asked Questions

1) Can the Cooper 7810UDST manual motor controller be used as a disconnect for a 480V three-phase motor?
Yes. The 7810UDST is rated 600V and 30A with a three-pole, single-throw arrangement for three-phase circuits, so a 480V three-phase motor load sits inside its voltage rating. All three ungrounded conductors break at once through the single toggle.
2) What wire size can I land on the Cooper 7810UDST motor controller terminals?
Terminals take #14 through #10 AWG conductors, and the device is front-wired, so you make up the connections from the face rather than reaching behind the device. If your motor feeder is #8 or larger, this controller is not the right device for that circuit.
3) Is a NEMA Type 1 motor controller OK for a washdown or outdoor location?
No. The 7810UDST comes in a stainless steel NEMA Type 1 enclosure, which is general-purpose indoor protection only. For washdown, wet, or outdoor mounting you need a NEMA 3R, 4, or 4X enclosed controller instead.
4) Does this manual motor controller provide overload protection for the motor?
It is a manual three-pole, single-throw switch with maintained closure, built for motor disconnect and on/off control. It switches the circuit, so overcurrent and overload protection still has to come from the branch circuit device or a separate overload relay in your motor control scheme.
5) Will the toggle stay in position, or does it spring back?
The actuator is a short toggle with maintained closure, meaning it stays where you put it. Flip it on and the contacts hold closed until someone flips it off, which is what you want for a motor disconnect rather than a momentary jog switch.
6) Can I use the 7810UDST on a single-phase motor?
It is specified for three-phase circuits with all three poles switching together. You can mechanically wire two poles for a single-phase load, but if the job is single-phase, a two-pole manual motor controller is the device to order so you are not paying for and mounting an unused pole.
7) How tough is the housing on the Cooper 7810UDST for a plant floor?
The switch body is molded glass-filled nylon in gray, and the surrounding enclosure is stainless steel. That combination is aimed at industrial-duty use in manufacturing and processing areas, including motor control center and panelboard installations.
8) What is the exact part number to order this Cooper three-pole 30A manual motor controller?
Order Cooper Wiring Devices part 7810UDST. That single model covers the three-pole, 30A, 600V configuration in the stainless NEMA Type 1 enclosure, so there are no finish or size options to pick between.
How fast can I get the Cooper Wiring Devices 7810UDST delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Cooper Wiring Devices 7810UDST come with a warranty?
Absolutely. The Cooper Wiring Devices 7810UDST is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Cooper Wiring Devices 7810UDST?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Cooper Wiring Devices 7810UDST from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!