MS Sedco CP/TX-J ClearPath Rad...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$100.00
$78.69
MS Sedco MS Sedco CP/TX-J ClearPath Radio Control Jamb Mount Transmitter MSS-CP/TX-J

MS Sedco CP/TX-J ClearPath Radio Control Jamb Mount Transmitter with HDRC, 300 MHz & 390 MHz and 5 Programming Modes

(No reviews yet) Write a Review

Model: CP/TX-J

In Stock (leaves warehouse same day if ordered before 3pm ET)

$100.00
$78.69
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

MS Sedco CP/TX-J ClearPath Radio Control Jamb Mount Transmitter — HDRC™, 300 MHz & 390 MHz Tri-Frequency Wireless Activation

The MS Sedco CP/TX-J is a ClearPath™ Radio Control Jamb Mount Transmitter engineered for the most reliable wireless activation of automatic doors available. This transmitter ships complete with the CP/TX-J unit, a wire harness, and a 9V battery pre-installed in the 1010 Jamb Surface Mounting Box — ready for immediate deployment. It features three selectable frequencies — MS Sedco's proprietary High Definition Radio Control™ (HDRC™), 300 MHz, and 390 MHz — housed in a compact 4"L x 2"W x 1"H form factor, making it ideal for commercial automatic door applications where interference-free performance is critical.

Key Features

  • Tri-Frequency Selectable Operation: Includes HDRC™, 300 MHz, and 390 MHz frequencies selectable via a simple slide switch, allowing seamless interchangeability with all past MS Sedco products and many other manufacturers' devices operating at these frequencies.
  • High Definition Radio Control™ (HDRC™) Technology: MS Sedco's latest breakthrough in RF signal transmission uses sophisticated componentry to transmit a fixed frequency signal that resists distortion from outside interference, passed through a proprietary electronic "filter" in the receiver to ensure reliable door activation.
  • 5 Programming Modes: Mode 1 (standard receiver), Mode 2 (receiver with adjustable time delay: 5, 10, 15, or 20 seconds), Mode 3 (dual channel receiver — requires CP/RXM module), Mode 4 (receiver with sequenced outputs — requires CP/RXM module), and Mode 5 (receiver with ratchet relay — requires CP/RXR module).
  • Complete Jamb Mount Package: Ships as a fully assembled unit with transmitter, wire harness, and 9V battery installed in the 1010 Jamb Surface Mounting Box — no additional components required for standard installation.
  • Compact Form Factor: Measures 4"L x 2"W x 1"H, enabling discreet jamb-surface mounting without compromising door frame aesthetics or clearances.
  • Shared PCB Platform: ClearPath™ transmitters share the same printed circuit board (PCB), come prewired, and are installed with a battery in a mounting box for consistent, reliable performance across the product line.
  • FCC Licensed & Interference-Resistant: FCC licensed and guaranteed to work where other RF systems fail, solving problems caused by interference and stray signals in demanding commercial environments.
  • Compatible Accessories: Modes 3 and 4 require the CP/RXM module (plugs directly onto the CP/RX main circuit board for a second output); Mode 5 requires the CP/RXR module (plugs directly onto the CP/RX main circuit board for ratchet relay functionality).

Certifications & Compliance

  • FCC Licensed
  • Commercial Grade

Technical Specifications

  • Operating Frequency: User-selectable 300MHz, 390MHz or HDRC (filtered 390MHz)
  • Input Power: 9V alkaline battery
  • Mounting: Jamb mount with MS Sedco #1010 surface box
  • Certification: FCC
  • Housing: Blue ABS plastic

Typical Applications

  • Commercial Office Building Automatic Door Systems
  • Healthcare Facility Hands-Free Door Activation
  • Educational Institution Accessible Entry Points
  • Retail Establishment Automatic Entrance Doors
  • Industrial and Warehouse Facility Access Control
  • Government and Municipal Building Automatic Doors
  • Multi-Tenant Residential Property Common Area Entries

Why MS Sedco ClearPath CP/TX-J?

MS Sedco ClearPath™ transmitters are built on a proprietary HDRC™ platform that transmits a fixed frequency signal through an electronic filter, eliminating the interference and stray signal issues that plague conventional RF systems. With three selectable frequencies, five programming modes, and a complete pre-wired jamb mount package including a 9V battery and 1010 Jamb Surface Mounting Box, the CP/TX-J delivers professional-grade reliability engineered specifically for demanding commercial automatic door environments.

Product Specs

Product Group:
Electronic Access Controls
Product Subgroup:
Sensors, Switches, Relays and Timers
Product Type:
Transmitter
Subcategory:
Radio Control
Commercial/Residential:
Commercial
Electronic:
Yes
Series:
300/390/HDRC Radio Control
Product Model:
CP/TX-J
Product Category:
Electronic Access Controls
Department:
Door Hardware

MS Sedco CP/TX-J – Frequently Asked Questions

1) Will the MS Sedco CP/TX-J work with radio receivers I already have on my automatic doors?
The CP/TX-J transmits on three user-selectable frequencies, chosen with a slide switch: MS Sedco's HDRC (a filtered 390 MHz signal), 300 MHz, and 390 MHz. That covers all past MS Sedco products and many other manufacturers' devices running at 300 or 390 MHz, so an existing receiver on either of those frequencies can be matched by setting the switch. HDRC is the exception: it only pairs with a ClearPath receiver carrying the matching electronic filter, so if you want the interference-resistant mode you need the ClearPath receiver side too.
2) What comes in the box with the MS Sedco CP/TX-J jamb transmitter, and do I need to buy anything else to install it?
It ships as a finished assembly: the CP/TX-J transmitter, a wire harness, and a 9V alkaline battery already installed in the MS Sedco 1010 Jamb Surface Mounting Box. It comes prewired, so nothing further is required for a standard jamb-surface install. Extra parts only enter the picture for the advanced programming modes, which need a receiver-side module rather than anything added to the transmitter.
3) I need the door to stay open longer than the default after someone hits the button. Can the MS Sedco ClearPath system do a timed hold?
Yes, through Mode 2 on the receiver, which adds an adjustable time delay of 5, 10, 15, or 20 seconds. That is set on the receiver side, not on the CP/TX-J transmitter, and Mode 2 needs no add-on module. Mode 1 is the plain standard receiver operation with no delay.
4) Which MS Sedco ClearPath modules do I have to order for dual channel or ratchet relay operation?
Two accessory modules cover the higher modes, and both plug directly onto the CP/RX main circuit board. The CP/RXM is required for Mode 3 (dual channel receiver) and Mode 4 (receiver with sequenced outputs), giving a second output. The CP/RXR is required for Mode 5, the ratchet relay function. Neither module mounts in the CP/TX-J itself, so specify them with the receiver when you place the order.
5) Our automatic door openers keep getting false triggers from nearby radio traffic. Will an MS Sedco HDRC transmitter fix that?
That is the problem HDRC is built for. High Definition Radio Control transmits a fixed frequency signal (a filtered 390 MHz) that resists distortion from outside interference, and the ClearPath receiver runs it through a proprietary electronic filter before acting on it, so stray signals on the band do not open the door. You have to run both ends in HDRC mode to get the benefit. If you leave the slide switch on plain 300 or 390 MHz for backward compatibility with an old receiver, you are back on a conventional unfiltered signal.
6) How much jamb space does the ClearPath CP/TX-J surface box take up?
The unit measures 4 x 2 x 1 inches (stated as 4 inches long, 2 inches wide, 1 inch high), so it surface-mounts on a jamb face without projecting into the door swing or crowding frame clearances. It is a surface box, not a flush or recessed device, so no jamb cutting or back-box prep is involved.
7) Is the CP/TX-J a wall push plate or a jamb-mounted device, and what powers it?
It is a jamb-mount transmitter, supplied in the MS Sedco 1010 jamb surface mounting box rather than as a wall plate actuator. Power is a single 9V alkaline battery, pre-installed, so there is no low-voltage run or transformer to pull to the jamb. That is what makes it practical on a frame where you cannot get wire to the strike side.
8) Is the MS Sedco CP/TX-J FCC licensed and rated for commercial buildings?
FCC licensed, and specified as commercial grade for automatic door activation in offices, healthcare, schools, retail, industrial and warehouse, government, and multi-tenant residential common areas. The housing is blue ABS plastic. If a facility spec calls for a licensed RF activation device on the entrance, this meets that on the FCC point.
9) If I standardize on ClearPath transmitters across a building, will the different mounting styles behave the same?
They will. ClearPath transmitters share the same printed circuit board across the product line and all ship prewired with a battery in a mounting box, so the CP/TX-J jamb unit runs the same electronics and the same three-frequency selection as its siblings. For a property manager rolling this out across several entrances, that means one set of receiver settings and one spare-parts habit rather than a different setup per door.
How fast can I get the MS Sedco CP/TX-J delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the MS Sedco CP/TX-J come with a warranty?
Absolutely. The MS Sedco CP/TX-J is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the MS Sedco CP/TX-J?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the MS Sedco CP/TX-J from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!