Nibco 0607-2-2 90-Degree Fitti...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$26.90
Nibco 0607-2-2 90-Degree Fitting Elbow Close Rough Ftg x Ftg - Wrot

Nibco 0607-2-2 90-Degree Fitting Elbow Close Rough Ftg x Ftg - Wrot

(No reviews yet) Write a Review

Model: 9060600

In Stock (leaves warehouse same day if ordered before 3pm ET)

$26.90
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
The 90-degree elbow features male solder ends and a close rough radius. The fitting provides a means of changing the pipeline direction 90 degrees. It is used when velocity is not a problem. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper's reusability makes it an ideal application in sustainable projects. NIBCO® copper fittings are manufactured in an ISO 9001 certified facility, and backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.

  • Lead-free*
  • Dezincification resistant
  • ASTM B75 Alloy C12200
  • NSF/ANSI/CAN-61 and 372
  • Material and workmanship per ASME B16.22
  • Material, workmanship and dimensions per MSS SP-104
  • NFPA 99 Health Care Facilities Gas and Vacuum Systems and the Compressed Gas Association, Pamphlet G4.1 (medical gas)

Copper Fittings Installation Instructions

Manufacturer Resources

Product Specs

All Application(s):
ACR Air Conditioning / Refrigeration;Lead-Free
All Basic Material:
Copper
Classification:
Solder Pressure Elbows
End Connection:
Solder
Fitting Bend Angle:
90 Deg (1/4 Bend)
Metal End Connection Type:
Ftg x Ftg
Product Group:
Fitting
Product Type:
Solder Pressure Elbows
System Use:
Commercial Plumbing, Compressed Air, Fire Protection, Heating, HVAC, Industrial, Irrigation, Lead Free*, Med-gas, Residential Plumbing
Product Subgroup:
Elbow
Department:
Plumbing

Nibco 9060600 – Frequently Asked Questions

1) Is the Nibco 0607 wrot copper elbow approved for potable drinking water?
Yes. The 0607 elbow is lead-free and certified to NSF/ANSI/CAN 61 and 372, which are the potable water and lead content standards, and it is listed for residential and commercial plumbing service. It is also dezincification resistant, which matters on aggressive or softened water supplies.
2) Can I use this copper elbow on a medical gas line?
Yes. The 0607 wrot copper elbow is built to NFPA 99 for health care facility gas and vacuum systems and to Compressed Gas Association Pamphlet G4.1, which is the medical gas cleanliness standard, and med-gas is one of its listed services. Note that med gas installs require brazing by a certified installer and the tube itself must be the cleaned and capped medical grade, so keep the fitting bagged until you are ready to braze.
3) Will a close rough elbow restrict flow, or should I use a long radius elbow?
Close rough is the short radius pattern, and Nibco states plainly it is for use where velocity is not a problem. On a branch run, a fixture drop, or anywhere you are just changing direction in tight framing, it is the right part. If you are on a high velocity recirculating line, a pump discharge, or anywhere you are managing pressure drop and erosion at the turn, specify a long radius elbow instead. The 0607 is not the fitting for that job.
4) Does this Nibco wrot copper elbow meet spec for a commercial job drawing calling out ASME B16.22?
It does. The 0607 elbow is made to ASME B16.22 for material and workmanship, and to MSS SP-104 for material, workmanship and dimensions, which are the two callouts that normally appear on a commercial copper fitting spec. The copper itself is ASTM B75 alloy C12200, and the fittings are produced in an ISO 9001 certified facility. It also carries NSF/ANSI/CAN 61 and 372 if the submittal asks for lead-free certification.
5) I am replacing a leaking copper elbow. How do I tell if I need the Ftg x Ftg version or the regular one?
Look at the two ends of the old elbow. If the copper tube goes INTO the elbow at both ends, you need a C x C elbow, not this one. If one or both ends of the elbow slip inside another fitting, that end is a fitting end, and the 0607 is the Ftg x Ftg configuration where both ends do that. Sizing goes by nominal tube size, 1 through 3 inch here, not by the measured outside diameter of the fitting, which runs about 1/8 inch larger than the nominal call.
6) What copper pipe sizes does the Nibco 0607-2-2 fitting elbow come in?
Five sizes: 1 inch, 1-1/4 inch, 1-1/2 inch, 2 inch, and 3 inch. Order by size and the part number follows, 9060600 for 1 inch, 9060650 for 1-1/4, 9060700 for 1-1/2, 9060750 for 2 inch, and 9060850 for 3 inch. Below 1 inch and above 3 inch you are outside what the 0607 close rough pattern covers here.
7) Can the Nibco 0607 copper elbow be used on refrigerant and air conditioning lines?
Yes, ACR air conditioning and refrigeration is a listed application for the 0607 elbow, and it is also rated for compressed air and HVAC hydronic service. It is wrot copper, ASTM B75 alloy C12200. For refrigerant work the joints are brazed, not soft soldered, and the line has to be nitrogen purged while you braze.
How fast can I get the Nibco 9060600 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Nibco 9060600 come with a warranty?
Absolutely. The Nibco 9060600 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Nibco 9060600?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Nibco 9060600 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!