You may also like
Nibco 4807-9 90-Degree Elbow with Side Inlet H x H x H - PVC DWV
Model: NBC-4807-9
The PVC DWV 90-degree elbow with side inlet features a hub x hub x hub connection and is used to change the direction of flow. Please refer to NIBCO technical data sheets and catalogs for engineering...
Nibco
Starting at
$25.41
The ABS DWV 90-degree elbow with a side inlet features a hub x hub x hub connection and is used to change the direction of flow. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings. NIBCO® plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Plastic Fittings Installation Instructions
- Service temperature -40-DegreeF to 180-DegreeF
- Do not test or use with compressed air or other gases
- CSA B181.1
- ASTM D2665
- ASTM D3965
- ASTM D2661 and D3311
- UL Listed 94V-0
- NSF/ANSI Standard 14
- NSF U.P. Certified
Plastic Fittings Installation Instructions
Manufacturer Resources
Product Specs
- All Application(s):
- DWV Drain / Waste / Vent
- All Basic Material:
- ABS - Acrylonitrile Butadiene Styrene
- Classification:
- ABS DWV Elbows
- End Connection:
- Solvent Weld
- Fitting Bend Angle:
- 90 Deg (1/4 Bend)
- Pipe Schedule:
- 40
- Plastic End Connection Type:
- Hub x Hub
- Product Group:
- Fitting
- Product Type:
- ABS DWV Elbows
- System Use:
- Commercial Plumbing, Residential Plumbing
- Type of Elbow:
- Side Inlet
- Product Subgroup:
- Elbow
- Department:
- Plumbing
- Product Color:
- Black
- Product Width:
- 6.54 in
- Product Length:
- 6.54 in
- Country Of Origin:
- United States
Nibco I068250 – Frequently Asked Questions
1) What sizes does the Nibco 5807-9 side inlet 90-degree elbow come in?
Two combinations: 3 x 3 x 2 inch (MPN I068250) and 3 x 3 x 1-1/2 inch (MPN I068300). Both run a 3 inch main through the quarter bend with the side inlet taking the smaller branch, so pick based on whether your branch line is 2 inch or 1-1/2 inch.
2) Is the Nibco 5807-9 elbow threaded or solvent weld?
All three openings are hub (socket) ends for solvent cementing, hub x hub x hub. There are no threads on this fitting, so you are cutting pipe square, priming, and cementing. If you need a threaded transition at one of these points, use a separate adapter.
3) Will this ABS fitting connect to existing cast iron or copper drain lines?
Not directly. The 5807-9 is Schedule 40 ABS with solvent weld hubs, sized to ABS DWV pipe. To tie into steel, copper, or cast iron you need transition fittings between the ABS and the other material.
4) Can this ABS DWV elbow be used on a pressure or compressed air line?
No. It is a drain, waste and vent fitting only, and Nibco states not to test or use it with compressed air or other gases. Keep it on gravity DWV service.
5) Does the Nibco 5807-9 meet plumbing code standards for a commercial job?
The fitting is listed to ASTM D2665, D3965, D2661 and D3311, CSA B181.1, NSF/ANSI Standard 14, NSF U.P. Certified, and UL Listed 94V-0. It is approved for both commercial and residential plumbing use.
6) What temperature range can this ABS drain fitting handle?
Service temperature runs from -40 F to 180 F, which covers normal sanitary drainage and dishwasher or laundry discharge. ABS also resists everything from sewage to common household chemical formulations.
7) When would I use a side inlet elbow instead of a plain 90 and a separate sanitary tee?
A side inlet quarter bend brings a branch line into the same fitting as the direction change, so you get the 3 inch turn and a 2 inch or 1-1/2 inch branch entry in one body. That saves a length of pipe and a joint where a fixture drain lands right at the corner, typically a lavatory or tub tying into a closet bend area. If the branch enters well away from the turn, a plain elbow plus a separate tee gives you more freedom on placement.
8) Is this fitting black ABS or white PVC?
Black ABS. The body is Acrylonitrile Butadiene Styrene, so use ABS solvent cement (or an ABS-to-PVC transition cement where code permits) and match it to black ABS DWV pipe, not white PVC.
9) Does the Nibco 5807-9 fit standard Schedule 40 ABS DWV pipe?
Yes, the hubs are sized for Schedule 40 ABS DWV pipe. Nominal 3 inch on the run, with the side inlet at 2 inch or 1-1/2 inch depending on which part number you order.
How fast can I get the Nibco I068250 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Nibco I068250 come with a warranty?
Absolutely. The Nibco I068250 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Nibco I068250?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Nibco I068250 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.