You may also like
NON INS RECT TONGUE TERM 22-16 NO8
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Product Subgroup:
- General Terminals
- Product Type:
- Electrical terminals
- Wire Size:
- 22-16 AWG
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Material:
- Copper
Sta-Kon A94 – Frequently Asked Questions
1) What wire sizes does the Sta-Kon A94 terminal crimp onto?
The Sta-Kon A94 is sized for 22 to 16 AWG conductors. That one barrel covers the whole range, so a panel built with 18 AWG control wire and 16 AWG pigtails can be terminated with a single part number. Anything heavier than 16 AWG will not seat in the barrel, so step up to a larger terminal for 14 AWG and above.
2) Is the Sta-Kon A94 insulated, and does that matter for my application?
It is non-insulated, bare copper. That matters two ways: you have to provide your own insulation if the terminals sit close together, usually heat shrink or a nylon sleeve, and you must use a non-insulated crimp die rather than the color coded insulated nest on your tool. Where terminals are in free air on a stud block with spacing, bare is fine and gives you a visible crimp you can inspect.
3) What is the difference between a rectangular tongue terminal like the A94 and a ring or fork terminal?
A rectangular tongue is a flat straight blade with a hole, so it sits flush under a screw head on a stud block and does not need the screw removed as far as a ring does, while still being fully captive once tightened. A ring terminal cannot slip off at all and is the choice for vibration or anything safety critical. A fork or spade slides in without removing the screw, which is quicker for service work but can back out. The A94 is the flush, captive compromise for 22 to 16 AWG wire on a No. 8 screw.
4) Is the A94 copper terminal suitable for aluminum wire?
No. The A94 is a copper terminal and should be used on copper conductors only. Terminating aluminum in a copper-only lug risks galvanic corrosion and a loose joint over time; use a terminal rated AL/CU for aluminum conductors.
5) Is the Sta-Kon A94 made in the USA for government or institutional procurement?
Country of origin on the A94 terminal is the United States, which is what Buy American and domestic preference specs on government, healthcare, and education work usually hinge on. Order it by manufacturer part number A94.
6) How do I order the right Sta-Kon terminal and is there more than one version of the A94?
There is a single configuration: A94, a non-insulated rectangular tongue terminal for 22 to 16 AWG wire with a No. 8 stud hole. No finish, length, or insulation color to choose. If your stud size or wire gauge differs, it is a different part number in the Sta-Kon range rather than an option on the A94.
How fast can I get the Sta-Kon A94 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon A94 come with a warranty?
Absolutely. The Sta-Kon A94 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon A94?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon A94 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.