You may also like
NON-INS RING TERM 12-10 BOLT 5/16
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Product Subgroup:
- General Terminals
- Product Type:
- Non-Insulated Ring Terminal
- Standards:
- UL E9809
- Voltage Rating:
- 600 V
- Wire Size:
- 12-10 AWG
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Metallic
- Product Material:
- Copper
Sta-Kon C70 – Frequently Asked Questions
1) What wire sizes does the Sta-Kon C70 ring terminal accept?
The C70 is sized for 12 to 10 AWG conductors. Anything smaller (14 AWG and up) or larger (8 AWG and down) will not crimp reliably in this barrel, so match the terminal to the actual conductor gauge, not the nominal circuit size.
2) Will the Sta-Kon C70 fit a 5/16 inch stud or bolt?
Yes. The C70 ring tongue is drilled for a 5/16 inch bolt or stud, which is a common size on panelboard ground bars, motor terminal studs, and battery or bus connections.
3) Is the Sta-Kon C70 UL listed for an inspected installation?
It carries UL file E9809, which is what an inspector or spec reviewer will want to see on a terminal used in a 600 V application. Crimp it with the tooling and die the connector is listed for to keep that listing valid.
4) Is the Sta-Kon C70 ring terminal insulated?
No, it's a bare non-insulated terminal. The copper barrel and tongue are exposed, so if the connection sits where a phase conductor could be touched or shorted, you need to add heat shrink or boot it, or choose an insulated ring terminal instead.
5) What voltage is the C70 terminal rated for?
600 V. That covers standard commercial and industrial branch circuit and control wiring, including 120/208 V and 277/480 V systems.
6) Why use a ring terminal instead of a fork or spade terminal on a 5/16 inch stud?
A ring tongue is captive: the bolt has to come all the way out before the conductor can leave the stud, which is why it is the usual choice for grounding, motor terminal boxes, and anything subject to vibration. A fork or spade slips off a loosened screw, and is only chosen where the terminal has to be removed without pulling the screw. The C70 gives you that captive ring for 12-10 AWG on a 5/16 bolt.
7) Are Sta-Kon C70 terminals made in the USA for a government or buy-American job?
Country of origin on the C70 is the United States, which is the documentation point most procurement officers on federal, education, and healthcare projects ask for.
How fast can I get the Sta-Kon C70 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon C70 come with a warranty?
Absolutely. The Sta-Kon C70 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon C70?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon C70 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.