You may also like
NON-INS - TUB RING TERM, 6, 1/4, ME
Manufacturer Resources
Product Specs
- Country Of Origin:
- Mexico (MX)
- Product Subgroup:
- General Terminals
- Product Type:
- Non-Insulated Ring Terminal
- Standards:
- UL E9809
- Voltage Rating:
- 600 V
- Wire Size:
- 6 AWG
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Metallic
- Product Material:
- Copper
Sta-Kon E10711 – Frequently Asked Questions
1) What wire size and stud size does the Sta-Kon E10711 ring terminal take?
The E10711 is built for 6 AWG conductor and a 1/4 inch stud. The barrel is sized for a single 6 AWG copper wire, so it will not grip 8 AWG properly and it will not accept 4 AWG. If the panel lug or ground bus you are landing on uses a 1/4-20 or #1/4 stud, the ring drops straight over it.
2) Will the E10711 work on aluminum conductor?
No. This is a copper terminal intended for copper conductor only. Landing aluminum wire in a copper-only barrel risks galvanic corrosion and a loose connection over time. For aluminum you need a terminal marked AL9CU or AL-only.
3) Is the Sta-Kon E10711 insulated, and do I need to sleeve it after crimping?
It is a non-insulated terminal, bare copper with no nylon or vinyl sleeve. In an enclosure where the terminal could be near a grounded surface or an adjacent phase, plan on heat shrink or a snap-on insulator over the barrel. Non-insulated is the usual choice where the connection sits under a lug cover or where the crimp needs to be inspected.
4) What kind of crimp tool does the Sta-Kon tubular ring terminal need?
It is a tubular (seamless barrel) terminal in 6 AWG, which is beyond hand-plier range for most people. Use a heavy-duty ratcheting or hydraulic crimper with a die matched to 6 AWG copper. A tubular barrel is crimped with an indent or hex die, not the color-coded insulated-terminal nests used for 22 to 10 AWG.
5) Is the Sta-Kon E10711 a UL listed terminal for an inspected commercial job?
The terminal is covered under UL file E9809 and rated 600 V, which is what an inspector looks for on a field-installed lug in a panel or control cabinet. Crimp it with the die the manufacturer specifies for the barrel; the UL coverage depends on a proper crimp.
6) What is the exact part number and country of origin for this Sta-Kon ring terminal?
Order it as Sta-Kon E10711. It is manufactured in Mexico and ships as a bare metallic copper terminal.
How fast can I get the Sta-Kon E10711 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon E10711 come with a warranty?
Absolutely. The Sta-Kon E10711 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon E10711?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon E10711 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.