You may also like
NON-INS - TUB RING TERM, 6, 3/8, ME
Manufacturer Resources
Product Specs
- Country Of Origin:
- Mexico (MX)
- Product Subgroup:
- General Terminals
- Product Type:
- Non-Insulated Ring Terminal
- Standards:
- UL E9809
- Voltage Rating:
- 600 V
- Wire Size:
- 6 AWG
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Metallic
- Product Material:
- Copper
Sta-Kon E10731 – Frequently Asked Questions
1) What wire size and stud size does the Sta-Kon E10731 ring terminal take?
The E10731 is sized for 6 AWG conductor and a 3/8 inch stud, which is what the "6, 3/8" in the part description refers to. If your conductor is 4 AWG or 8 AWG, this is the wrong lug, barrel crimps are size-specific and an undersized or oversized barrel will not hold the required pull-out.
2) Is the Sta-Kon E10731 insulated or does it need separate insulation?
It is a non-insulated tubular ring terminal, bare copper with no sleeve. On anything where the barrel could be touched or could flash to an adjacent terminal, you need to add heat shrink or tape yourself, or specify an insulated lug instead.
3) Is the E10731 copper or aluminum, and can I put it on an aluminum conductor?
The barrel is copper, so it is intended for copper conductors. Aluminum conductors need a lug marked AL or AL9CU with the correct inhibitor compound, not a bare copper crimp lug.
4) Ring terminal or fork terminal for a 3/8 inch stud on panel work?
For a 3/8 inch stud carrying 6 AWG, a closed ring like the E10731 is the one to use. The ring cannot vibrate off the stud if the nut backs off, which is why ring tongues are standard on motor leads, bus studs and grounding points. A fork or spade tongue is only worth it when you need to slide the lug out without fully removing the nut, as on dense terminal strips.
5) Is the Sta-Kon E10731 a solder lug or a crimp lug?
It is a tubular crimp barrel, installed with a die crimp tool matched to 6 AWG. There is no solder cup. Use the die and tool combination the terminal is listed with, since the UL recognition under E9809 applies to a properly crimped connection.
6) Where is the Sta-Kon E10731 made, for submittal paperwork?
Country of origin is Mexico. The orderable part number is E10731.
How fast can I get the Sta-Kon E10731 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon E10731 come with a warranty?
Absolutely. The Sta-Kon E10731 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon E10731?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon E10731 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.