You may also like
NON INSUL TUB RING 6AWG, 3/8BOLT NP
Manufacturer Resources
Product Specs
- Country Of Origin:
- Mexico (MX)
- Product Subgroup:
- General Terminals
- Product Type:
- Non-Insulated Ring Terminal
- Wire Size:
- 6/6AN
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Material:
- Copper
Sta-Kon E10731NP – Frequently Asked Questions
1) Is the E10731NP ring terminal insulated?
No. It is a non-insulated tubular ring terminal, so the crimped barrel is bare copper. If the termination sits in an enclosure where adjacent phases or a grounded surface are close, plan on heat shrink or tape over the barrel, or choose an insulated ring terminal instead.
2) What is the Sta-Kon E10731NP lug made of, and can I use it on aluminum conductor?
The E10731NP is copper. It is intended for copper conductor at 6 AWG. Aluminum conductor needs an aluminum or AL/CU rated connector, so don't substitute this one on an aluminum feeder.
3) Do I need a special crimper for the Sta-Kon E10731NP?
Yes, it is a crimp-on tubular barrel, not a set screw lug, so it needs a crimping tool with a die matched to 6 AWG copper. A hand ratchet or hydraulic crimper with the correct nest gives the full-circle compression this barrel is designed around; pliers will not.
4) How do I order the Sta-Kon E10731NP, and what part number should I quote?
Order by Sta-Kon part number E10731NP. It is a single configuration, 6 AWG with a 3/8 inch bolt tongue, non-insulated, so there are no finish or size options to specify.
5) Where is the Sta-Kon E10731NP terminal made? I need country of origin for a government submittal.
Country of origin is Mexico. That is the figure to put on a procurement or trade-compliance form for the E10731NP.
How fast can I get the Sta-Kon E10731NP delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon E10731NP come with a warranty?
Absolutely. The Sta-Kon E10731NP is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon E10731NP?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon E10731NP from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.