You may also like
Nuts 6-32 Wing Nut Forge-St (Jar 100)
Additional Notes
- Other sizes and quantities available by request
Manufacturer Resources
Product Specs
- Arra Compliant:
- C
- Base Diameter:
- 0.29 - 0.33
- Buy American Compliant:
- C
- Division:
- Electrical H1
- Language Code:
- EN
- Neurspe:
- https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Wing_Nuts_Cold_Forged_Steel.pdf
- Order Minimum Imperial:
- 100
- Order Minimum Uom Imperial:
- CT
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Product Height:
- 2.15 in
- Product Length:
- 3 in
- Product Weight:
- 0.42 lbs
- Product Width:
- 3 in
- Sub Division:
- Electrical-E H2
- Thread Per Inch:
- 32
- Thread Standard:
- ANSI/ASME B18.17
- Wing Height:
- 0.28 - 0.41
- Wing Spread:
- 0.59 - 0.72
- Wing Thickness:
- 0.07 - 0.11
- Department:
- Electrical
- Product Subgroup:
- Nuts
- Product Type:
- Wing Nut
- Type2:
- Wing Nut
- Series:
- JWN
- Product Finish:
- Zinc
- Product Details:
- Wing Nut
- Product Material:
- Forged Steel
Metallics JWNCF2 – Frequently Asked Questions
1) Is this wing nut steel or plastic, and will it hold up in a damp location?
Cold forged steel with a zinc finish. The forged body takes hand torque without the wings deforming the way a cast or stamped nut can, and the zinc plating gives ordinary indoor corrosion resistance. Zinc plating is not a marine or continuously wet duty coating, so for sustained outdoor or wet exposure a stainless fastener is the better call.
2) How are the Metallics JWNCF2 wing nuts packaged and what is the smallest quantity I can order?
They ship in a jar of 100 pieces, and 100 count is the order minimum, so one jar is the smallest buy. The filled jar weighs 0.42 lbs. Metallics lists other sizes and quantities on request if you need a different thread size or a bulk count for a shop crib.
3) Why use a wing nut instead of a standard hex nut on a 6-32 screw?
A wing nut is for anything you expect to take off again without a tool: covers, access panels, temporary grounding and bonding straps, fixture canopies, trim that gets pulled for service. It tightens and loosens by hand. Where the joint needs real clamping torque or has to resist vibration loosening, a hex nut or a lock nut driven with a wrench is the right choice instead. The JWNCF2 is a hand tightened fastener, not a torqued one.
4) What exact part number should I order for Metallics 6-32 cold forged steel wing nuts?
Order Metallics JWNCF2, part of the JWN wing nut series. One model covers the 6-32 cold forged steel zinc version in the 100 count jar, so there is no finish or pack choice to specify.
How fast can I get the Metallics JWNCF2 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JWNCF2 come with a warranty?
Absolutely. The Metallics JWNCF2 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JWNCF2?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JWNCF2 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.