NUVO Lighting 65-860-4 LED Area Light Type IV, 100W, Bronze Finish, 4000K, 277-480V

The 65-860-4 is a high-voltage driver fixture, rated 277V-480V. That covers 277V, 347V and 480V service common in commercial and industrial panels. It will not run on 120V or 208-240V single-phase, so if your pole circuit is standard 120-277V multi-volt you need the universal-voltage version instead, not this one.

Type IV throws a forward, semi-circular pattern out from the fixture rather than spreading light both directions. That makes it the pattern for perimeter poles, the edge row of a parking lot, and wall-mount applications where you want light pushed away from the building and no spill behind the pole. For interior drive aisles with poles between two rows of parking, a Type III or Type V distribution covers both sides better.

A slip-fitter mount comes with the fixture, so it goes onto a tenon or a horizontal pole arm without a separate bracket purchase. If your poles are drilled for a direct-arm bolt pattern rather than a tenon, the slip-fitter will not land on them and you would need an arm or tenon adapter to make it work.

Yes. It carries a Wet location rating and is cULus certified, so it is approved for open outdoor mounting with direct exposure to rain and snow. The housing is die-cast aluminum, which is what holds up on pole tops and building exteriors.

No. The 65-860-4 is fixed at 4000K with a CRI of 80, and it is not CCT selectable. If you are matching a site that is already lit at 3000K or 5000K, order that color temperature as a separate model rather than expecting to change it in the field.

At 100W drawing 13,793 delivered lumens, this fixture lands in the range normally covered by a 250W to 320W metal halide or high pressure sodium shoebox, since HID fixtures lose a large share of their initial lumens to optics and depreciation. For a one-for-one relamp decision, compare against the maintained footcandles on your existing photometric layout rather than nameplate watts.

The fixture is dimmable, so it can be driven by an external 0-10V type control for part-night setback or sensor-based dimming. The dimming control, photocell, or sensor is not part of the fixture and has to be ordered separately.

The LED is integrated, with no lamp base or socket, so there is no bulb to change. Service life is rated at 50,000 average hours, and at end of life the fixture or the driver assembly is replaced, not relamped. That matters for MRO budgeting on a large pole count.

The fixture weighs 7.88 lbs and measures 20.71 inches long, 12.4 inches wide, and 3.11 inches high. The low weight and shallow 3.11 inch profile keep the wind load modest, which is what the pole engineer needs when running EPA numbers for multiple heads on one pole.

The 65-860-4 is RoHS compliant. It also carries a California Proposition 65 disclosure for lead, which is standard on die-cast metal lighting housings and is relevant if you are supplying a California project with Prop 65 labeling requirements.

Bronze is the only finish for the 65-860-4. It is a utility-style housing, so it reads as a standard dark bronze shoebox alongside existing bronze poles and arms. If your site standard is black or white, that is a different catalog number.