NUVO Lighting 65-860-5 LED Area Light Type V, 100W, Bronze Finish, 4000K, 277-480V

No. The 65-860-5 is a high-voltage fixture rated 277V to 480V only. It suits 277V lighting circuits off a 480/277V wye service or 480V feeds common in commercial parking lots and industrial yards. On a 120V or 208/240V service you need a different voltage version of the fixture, not a driver swap.

Type V throws light in a round, symmetrical pattern all the way around the pole, so it is meant for poles set in the middle of a lot, at intersections of drive aisles, or over open yards where you want coverage on every side. If the pole sits along the perimeter or right against a building line, a symmetrical pattern wastes light off the property, and a forward-throw or Type III pattern is the better choice there. At 100W and 13,793 lumens this one is sized for typical parking and site pole mounting.

A slip-fitter mount ships with the fixture. That means it goes onto a round tenon at the top of a pole or onto a bullhorn/tenon arm. If your poles are drilled for a direct arm mount instead of having a tenon, the included slip-fitter will not bolt up and you will need a tenon adapter.

Yes, it is a wet location rated outdoor fixture and cULus certified, so direct exposure to rain, snow, and hose spray on a pole or arm is what it was built for. The housing is die-cast aluminum.

Fixed. This one is not CCT selectable, so it is 4000K neutral white with no field switch. If you are adding fixtures to a lot that already runs 4000K it will match; if the existing heads are 3000K or 5000K you will see the difference across the site and should spec a matching color temperature instead.

Yes, the fixture is dimmable, so it can be driven down for late-night setback or curfew schedules through a compatible control. The LED module is integrated, so dimming is handled at the driver, not by changing lamps.

There is nothing to relamp. The LED source is integrated into the fixture, so there is no socket and no replaceable lamp; when it reaches end of life the head gets replaced. Average rated life is 50,000 hours.

The head measures 20.71 x 12.4 x 3.11 inches and weighs 7.88 lbs. That is a light, low-profile housing for a 100W area light, which keeps the load on an existing pole and arm modest when you are retrofitting older HID heads.

CRI is 80, which is the normal range for site and area lighting and renders vehicle and clothing color well enough for camera review and general security work. Paired with 4000K neutral white output at 13,793 lumens, it gives the flat, even color that most municipal and commercial lot specs call for.

The fixture is RoHS compliant, and it carries a California Proposition 65 notice for lead. Facilities buyers standardizing on a site fixture will want both noted in their submittal package.

Bronze is the only finish offered on this model, which is the standard color for pole-mounted site lighting and matches most existing bronze poles and arms on commercial properties.