NUVO Lighting TH425 1-Light, LED, 12W Track Head, Angle arm, Brushed Nickel, 24 degree Beam

The TH425 is a dimmable LED track head running on 120V line voltage. It draws 12W and the LED is integrated, so there is no lamp to swap and dimming is handled at the track circuit's wall dimmer rather than by the head itself.

No. The LED is integrated into the TH425 head, so there is no socket and no replaceable lamp. It is rated at 30,000 average hours, and at end of life the head itself gets swapped. For a fleet of fixtures across a property, that means stocking spare heads rather than spare lamps.

No. The TH425 is rated for dry locations and indoor use only. Keep it out of covered exterior soffits, bathrooms with direct spray, and any damp-rated application. It is cETLus safety listed for its indoor dry-location use.

The TH425 is the track head only, a single-light ceiling-mounted fixture that attaches to an existing track run. Track sections, connectors, feeds, and end caps are separate items. Budget for the track and power feed when you are pricing a full install.

Output is 1020 lumens at 12W with a 24 degree beam. That is a narrow spot pattern, meant for accenting artwork, merchandise displays, or a retail feature wall rather than washing a room. If you need even ambient coverage over a sales floor or office, a wider beam angle head is the better call; the 24 degree is for throwing a defined pool of light on a target.

The angle arm gives a 5.75 inch extension off the track, and the head body measures 3.38 x 2.75 x 2.75 inches. Weight is 1.05 lbs per head. Those are the numbers to use when you are checking clearance under a low ceiling or figuring how far the head will drop in front of a display case.

CRI is 90, which is the level specified for retail merchandise, artwork, and anywhere color fidelity on the lit object matters. Note the color temperature is fixed, not field selectable, so every head on a run will match only if you order the same part.

RoHS compliant, yes. It also carries a California Proposition 65 warning for lead, which is standard disclosure on many metal-bodied electrical fixtures and matters if you are shipping into or specifying for a California project.

NUVO publishes both. The manufacturer spec sheet is at media.satco.com/specsheets/pdf/TH425.pdf and the installation instructions are hosted at assets.satco.com under the TH425 product folder. Useful if a submittal package or an electrician needs the cut sheet before rough-in.

Brushed nickel is the finish, in a contemporary angle-arm form. If you are adding heads to an existing run and the installed heads are black or white, these will not match visually, so check the finish on what is already up before ordering.